CSR 65% Met Coke

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of CSR 65%    Met  Coke    Description

Coke is a hard texture, with carbon as the main component of irregular porous body, with cracks and defects in silver. The true density is 1.8 ~ 1.95 g/cm3, bulk density is 400 ~ 500 kg/m3, the porosity of 35% ~ 35%,.Coke all vertical and horizontal crack can be seen with the naked eye observation. The vertical and horizontal crack along the thick break, still is focal piece containing micro cracks.

To ensure the quality of coke, the choice is the most basic requirements of coking coal volatile matter, caking and coking properties; the vast majority of coking coal must go through washing, as much as possible to ensure low ash content, sulfur content and phosphorus content. When choosing a coking coal, but also must pay attention to the inflation pressure in the process of coal in coking. With low volatile coal coking, due to its colloid viscosity big, prone to high inflation pressure, harms the coke oven masonry, needs to be addressed by coal blending coking.

2. Main Features of the CSR 65%    Met  Coke   

     Quality assurance

     Mutual benefit

     Preferential price

     Various choice

3. CSR 65%    Met  Coke    Images:

 

CSR 65%    Met  Coke

CSR 65%    Met  Coke

CSR 65%    Met  Coke

CSR 65%    Met  Coke


4. CSR 65%    Met  Coke    Specification:

 

Parameters

Guarantee

Rejection

Total Moisture (As received basis)

5% max


Ash (dry basis)

12.5% max

> 13.5%

Volatile Matter (dry basis)

1.5% max

> 1.8%

Sulphur (dry basis)

0.65% max

> 0.75%

Phosphorus (dry basis)

0.035% max

> 0.045%

M10

7% max

> 9%

M40

84% min

<82%

CSR

65%   min

<63%

CRI

25% max

> 27%

Size 30-90 mm

90% min


+90 mm

5% max

> 8%

-30mm

5% max

> 8%


5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1) Main type

Metallurgical coke is blast furnace coke, coke, iron alloy and nonferrous metal smelting with coke. As more than 90% of the metallurgical coke for blast furnace ironmaking, so often called the blast furnace coke metallurgical coke.

Foundry coke is dedicated to cupola molten iron. Coke is the main fuel of cupola molten iron. Its role is hot metal melting furnace charge and overheating, support stock column maintain its good air permeability. As a result, coke blocks should have large, low reactivity, low porosity, with sufficient impact crushing strength, ash content and low sulfur content.

2) Application of coke

     Used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury

     Other non-ferrous metal smelting of blast furnace,

     Reducing agent, compound

     The function of stock column frame.

3) The history of coke

Our country's metallurgical industry has a long history, is the original fuel charcoal smelting industry, due to the charcoal burning temperature is lower, and short duration of fire and not easy to master hour, therefore, directly affect the level of smelting, to make the steel quality is not guaranteed. Later, people use coal as smelting, coal combustion temperature is higher, and the combustion duration is longer than charcoal, but easily broken after coal is heated in the oven, affect the burden of permeability, and high content of sulfur in coal, directly affect the quality of the cast iron. After a period of practice, it has been found that the coal after dry distillation (i.e., separated flame heating), volatile components may be removed, and the porosity increased, resembling charcoal, fire is better than that of coal, but also can avoid charcoal and coal. This after carbonization of coal is coke.

Currently found in the earliest coke in our country, is in Guangdong new will be a unearthed in the ancient ruins in the late 13th century, during the southern song dynasty period in our country. Thus concluded that China's song dynasty, have been used to coke ironmaking. Guangdong new will find coke is also found that the earliest in the world. In Europe, the UK in 1788 began with coke ironmaking, this is the earliest record of western countries, the more than 500 years later than our country.

 Although the use of coke earliest in our country, but has not seen through the records. Coking and the earliest recorded with coke can be found in the late Ming dynasty in China side to write the physical knowledge, he pointed out that coal everywhere all have, "smelly burning-out and closed into stone, chisel and charging again yue reef (coke), May 5, fire, cook Fried mine stone, will save Labour". This smelly coal, it is to point to contain volatiles more coking coal, the coal sealed burning-out, becomes hard coke, used for smelting, the effect is very good.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is coke? What is the use?
In addition to coke for iron and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, its quality requirements vary. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength. But requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.
Q:Effect of coke powder ratio on the index
2, the phosphorus content of coke: iron metallurgical coke content should be 0.02 - 0.03%.3, coke ash: blast furnace coke ash effect is very significant. The amount of coke ash in coke increased by 1%, an increase of 2 - 2.5%., therefore, a decrease in coke ash is necessary4, coke volatile: according to the coke can be judged by the volatile content of volatile volatile is greater than 1.5%, then the coke; volatile less than 0.5 - 0.7%, which means that too much, generally mature volatile metallurgical coke to about 1%.5, coke moisture: moisture fluctuations should not be measured in coke, causing fluctuations in the furnace conditions. In addition, increased M04 coke moisture content high, low M10, the drum index error
Q:Coke can be used to do what carbon black can be used to do?
Carbon black in plastics industry is the first use of carbon black pigment coloring, is cheap. Second carbon black in plastics industry use is to have good ultraviolet absorption effect, its application shows quite obvious protective effects in plastic. Third carbon black in plastics industry use is conductive.
Q:How much sulfur content of Coke will affect the casting process of nodular cast iron
The high sulfur content of nodular cast iron, the most significant impact on the casting is caused by poor balling,
Q:How much coke is needed for a ton of iron
Iron ore in blast furnace, mainly iron and oxygen compound. At high temperature, the carbon monoxide produced in the coke and the carbon dioxide in the injection and the carbon monoxide generated by the carbon capture the oxygen in the iron ore, which is called the reduction. The iron ore is used to produce pig iron by reduction reaction. The gangue in the iron ore, the ash in the coke and the spraying material and the flux of the limestone in the furnace are combined to generate the slag, and the slag is discharged from the taphole and the slag outlet respectively. The gas is derived from the top of the furnace, which is used as industrial gas after dust removal. Modern blast furnace can also use the top of the high pressure, with the export part of the gas power generation.
Q:Who can talk about the coke industry prospects?
With the rapid development of the domestic and international iron and steel industry, the demand for coking products is increasing rapidly, the investment is heating up, and the industry is expanding rapidly. But the coking industry of high resource consumption, production and emissions, especially the emissions of harmful substances, causing serious waste of resources and environmental pollution, brings great pressure to the sustainable development of national economy, which also hindered the rapid development of coking industry.
Q:Why does casting coke require phosphorus?
Foundry coke is used in cupola melting iron will fuel. Because the blast furnace cupola and metallurgical industry is different, only melting effect, without reduction reaction, the furnace is not so dephosphorization, the phosphorus in coke, some will come back to this in the metallurgical molten iron, called "Rephosphorized", this is decided by the principle of thermodynamics and kinetics. To make the original low phosphorus iron phosphorus increased harmful phosphorus. Therefore, the general foundry to buy Coke require low phosphorus coke. Some foundry with part of lime and dolomite in dephosphorization of iron in cupola, in the process, can relax the requirements for coke. However, this is suitable for large-scale, continuous production of iron.
Q:The difference between semi coke and coke
Coke is used for smelting iron alloy coke, and the coke is used in blast furnace and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, heating agent and columnar skeleton.
Q:What are the quality indicators of coke
Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test. Evaluation of the quality of coke, 1 of sulfur in coke: sulfur is a harmful impurity of iron smelting, which reduce the quality of pig iron. The sulfur content in the pig iron is more than 0.07%. 11% of the sulfur from the blast furnace charge into the furnace comes from the ore, and the other comes from the limestone; the other is from the coke, so the coke is the main source of sulfur in the charge of the 82.5% of the charge. Sulfur content in coke directly affects the production of blast furnace. When the sulfur content in coke is greater than 1.6%, sulfur increased 0.1%, the amount of coke increased 1.8%, limestone amount increased 3.7%, 0.3% increase in amount of ore blast furnace output to reduce the sulfur content under 1.5 - 2.0%. metallurgical coke is not greater than 1%, the use of large and medium-sized metallurgical coke content in blast furnace is less than 0.4 - 0.7%
Q:What is cokeWhat applications are, what is the fire of Malachite copper
Malachite is a kind of copper, copper smelting with coke burning malachite is under high temperature.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range