Cryogenic Fiberglass Insulation Paper with Aluminium Foil for LNG Cylinder
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
Flame retardant glass fiber cryogenic insulation paper, made of the raw material of super fine glass micro fiber through special processing technology production.
Our cryogenic micro fiberglass insulation paper is fabricated with selected superfine fiberglass which is generally laminated with aluminum foil.
It shares the advantage of low thermal conductivity but high thermal contact resistance, outstanding uniformity, fast out gassing rate but low gas emission under vacuum conditions, light gram-weight and wide applicable working temperature range (269C~500C). It is the top selected insulation materials applicable for cryogenic liquid storage & mobile containers and pipeline systems for liquid oxygen, nitrogen, hydrogen, helium, argon, LNG and etc.
Cryogenic Insulation Paper Features:
The main way of heat conduction is by radiation heat exchange in the low and vacuum condition. In order to reduce the radiation heat exchange to meet the good heat insulation effect, by using aluminum foil for reflecting screen and superfine glass fiber insulation paper for spacer, then the multilayer combination of aluminum foil reflective screen and cryogenic & insulation material can build up the efficient thermal barrier against heat transfer in insulated vacuum storage containers.
Cryogenic Insulation Paper Application:
Cryogenic liquid (liquid helium, liquid hydrogen, LNG, liquid oxygen, liquid nitrogen, liquid argon, etc.)
Cryogenic Insulation Paper Specifications
1.light weight
2.good uniformity
3.low thermal conductivity
Technical data:
Q1 What’s the transport method?
A1 FCL delivery goods with wooden pallet; If LCL delivery, must with wooden case; Sometimes need open top, flat rack or bulk cargo.
Q2 What’s the required payment term?
A2 Generally 30% TT as the prepayment, 70% TT before delivery. If need, 100% Irrevocable Letter of Credit or negotiation.
Q3 Which country are our products exported to?
A3 Apart from entire Chinese market, the US, Russia, Japan, Korea, Australia and some Southeast Asian Nations.
- Q:What is a cryogenic fast line
- Equipment is compressor, heat exchanger and expander (or throttle). The compressor and expander generally use a reciprocating or turbine. Commonly used heat exchanger coil type, shell and tube type or plate heat exchanger. Deep freezing technology, can the nature of the study of materials near absolute zero, and can be used for the separation of liquid and gas mixture of gases. Industry can get liquid oxygen, liquid, gas, etc.; Can be effectively separated from the air
- Q:Cryogenic treatment to improve what performance?
- Improve the impact toughness of the workpiece;Improve the internal stress distribution and improve the fatigue strength;Improve the corrosion resistance of the workpiece;
- Q:How many changes in the properties of the cryogenic metal?
- Name material application effect1 the average number of W18Cr4V drill holes is 2.87 times that of untreated2 the number of drill holes in W6Mo5Cr4V2 twist drill is increased by 84%3 15 W18Cr4V from each processing to raise to4 M16 punching bit W12RE each 20 thousand to 40 thousand pieces5 M16 punching bit 65Nb each 1 thousand to 3 thousand pieces6 scissors T8, T10, T12 scissors silicon steel sheet life increased by more than 2 times7 milling 434 stainless steel blade C-2 carbide service life increased by 400%8 bearing steel GCr15 wear resistance increased by 3 times9 M3*0.5 Cr12MoV from a pair of processing to improve the 8000 pieces10 silicon steel sheet die Cr12 die life doubled11 hot stamping die 3Cr2W8V increased by 2.5% compared with the conventional AB, B increased by, AK increased by 4.9%12 M22 trimming die 012A1 each from 8000 to 30 thousand pieces13 processing silicon steel sheet die Cr12 processing sheet number increased from 300 thousand to 600 thousand
- Q:I would like to ask how the process of cryogenic treatment
- The air is compressed to 0.5MPa, or 22.5MPa, can reduce the water cooling, after expansion machine (piston or turbine), the temperature dropped to close to the liquid temperature to the fractionation tower after liquefaction, become rich liquid, the liquid oxygen into a fractionating tower, liquid oxygen, nitrogen is directly sent out after heat exchanger. Inlet air cooling.
- Q:What is the meaning of vacuum cooling in heat treatment
- In order to eliminate residual austenite after heat treatment, after quenching or tempering
- Q:What is the meaning of deep frozen
- In general, the frozen layer of our home refrigerator can only reach -18 degrees, but also slow freezing, slow freezing will have a great impact on food nutrition and flavor.
- Q:Can the cryogenic phase control the cooling rate?
- 2, the compressor refrigeration principle: the use of the suction pipe of refrigerant gas inhalation of low temperature and low pressure, through the operation of the motor drives the piston to compress it after high temperature and high pressure refrigerant gas discharge pipe to the exhaust, to provide power for the refrigeration cycle, so as to realize the compression, condensation, expansion and evaporation (endothermic) refrigeration cycle. The refrigerant of the compressor can be repeatedly used for a plurality of times, the consumption is relatively small, the power consumption in the refrigeration process is more, the cooling rate is relatively small, and the refrigeration temperature range is 0-80 DEG C. The above mentioned two kinds of refrigeration in the process of industrial production of cryogenic box, the use of liquid nitrogen refrigeration will be more. Liquid nitrogen refrigeration can be used in the temperature range from 0 DEG C to -196 DEG C. []
- Q:What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- Copper alloy, hard alloy, plastic, glass and so on to improve the uniformity of low temperature, stable size, reduce deformation, improve service life
- Q:Ultra low pressure casting mold useful, how to arrange the process? Thank you
- While casting field production high temperature is about 660 degrees, some die casting production Aluminum Alloy temperature of 740 degrees, copper alloy die-casting production temperature even up to about one thousand degrees, the temperature and the ambient temperature, the temperature fluctuation is bigger, hot and cold alternating stress caused by the greater! That is, the stress produced in the production process is very large, even if the cryogenic treatment, the stability of the role of the size of the casting mold and plastic mold is not obvious! As for how you choose, you might as well try!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cryogenic Fiberglass Insulation Paper with Aluminium Foil for LNG Cylinder
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
