Coupling with Nylon Coating

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
1 Ton unit
Supply Capability:
1000 Tons per Month unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

  

Nylon Coated Fitting

 

Flanged adapter, coupling, dismantling joints and other Viking Johnson type fittings. (DN80-300 Flanged adapter&coupling are wide range designing and both P10/16)

 

For surface treatment, besides Epoxy Resin Powder Coated(Blue color) and cement/bitumen(Black color), so far we are the only producer of supplying pipe fittings with Nylon coated in China.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is the trachea connected directly to the inside and outside threads? I remember a sealing ring
This problem is too abstract. There are several cases: 1:, if the pipe thread (G, NPT, BSP), only need to use raw tape or liquid TEFLON coated, tighten can be. 2: some joints are sealed by the cone. Sealed by a cone (of a ferrule); some have O rings, others are straight. You can find it on PARKER's product samples. 3: some joints are screwed with M thread. Seal by type O ring or copper gasket. Go to the FESTO, SMC site and find the M connector. 4: there are other types of fast joints. There are too many kinds.
Q:Hydraulic pipe fittings, DIN, GB, American Standard how to distinguish?
ZG is a commonly known as cone, cone thread processing, pipe joint is generally the old GB marked Rc for metric threads to represent the thread pitch, with every inch of the thread number, this is the biggest difference between them, metric thread is 60 degrees equilateral tooth type. 55 inch thread is isosceles tooth type of thread, 60 degrees. Metric units for metric threads; British and American systems. Pipe thread is mainly used for pipe connection, the internal and external threads are closely matched with straight pipe and cone pipe two kinds. Nominal diameter refers to the diameter of the pipe to be connected. Obviously, the diameter of the thread is larger than the nominal diameter. 1/4, 1/2, 1/8 is the nominal diameter of inch inch, inch in inches.
Q:What kind of tubing connections do you have?.
According to the number and direction of the connection, there are straight through, right angle, three pass and other types. The connection with the body has threaded connection, flange connection and so on. In addition, there are some special purpose pipe couplings.
Q:What are the types of hydraulic couplings?
Is a flat +O ring, C - like Japan, spherical ring - free, H - like Germany, 24 degrees cone +O - shaped ring.Each has hundreds of models, depending on the manuals and samples.
Q:The pipe line of the hydraulic pressure pipe is formally installed
Three. Threaded pipe threads (GB 7306 is the same as ISO7/1)1. thread sealed pipe threads, without padding or sealing, can prevent leakage. The pipe thread with screw thread has two connecting forms: cylindrical internal thread and tapered outer thread, tapered inner thread and tapered outer thread. When the pressure is below 5 * 105Pa, the former connection is close enough, and the latter connection is usually used only at high temperature and high pressure.2. thread sealed pipe thread, there are two kinds of thread cone, cylinder. The external thread has only one form of taper. Tooth type is as follows: taper 1:16, tooth shape angle 55 degrees, old thread standard example: ZG3/8;
Q:What's the difference between pipe repair device and clamp type flexible pipe joint?
Generally applicable range is less than 16 kilograms, can not solve the limit problem, limited position can not solve the problem of flexible axial compensation.
Q:The hydraulic pipe fittings how to distinguish the British, American, metric!
Also known as the metric metric tube thread pipe thread, 6810 diameter (pitch diameter of 12141618202224 (1); 1.5; 2730333639424548525660 (pitch) diameter pitch 2), divided into cylindrical and tapered pipe thread pipe thread, with the way into the column, cone and cone, cone two.
Q:What are the differences between hydraulic couplings and fittings and elbows?
The hydraulic pipe connection includes hose joint and steel pipe jointThe connector body does not include the nut clamp. There are straight through fittings, elbows, and 45 degree joints, etc..Elbows generally refer to joints of 90 degreesMy side is to do this piece, the United States PARKER Parker imported hydraulic hose, joints, quick connectorThere's contact information in the comments, thank you!
Q:What are the standard drawing numbers for hydraulic couplings?
Jacket type pipe joint installation(1) in accordance with the requirements of the ninth chapter, the pickling pipe should be washed first;(2) tube machine tools for cutting pipe sawing or special cutting length required, absolutely not allowed by fusing (such as flame cutting) or grinding wheel cutting; remove pipe end burr, cylindrical metal chips and dirt; remove the rust and dirt pipe joint; and also to ensure pipe roundness;(3) the sleeve nut, successively sheathed in the pipe sleeve front edge (small end) from the pipe mouth at least 3mm, then the pipe is inserted into the connector body bore, until the top;(4) tighten the nut slowly, and turn the pipe at the same time until it does not move. Then tighten the nut 2/3 ~ 4/3 ring;(5) open the check that the sleeve has been cut into the pipe and the position is correct. The sleeve doesn't allow axial movement, but it can be rotated slightly;
Q:Standard for fabrication of jacket type pipe couplings for card sleeve couplings
6 flared flared joint (GB/T 5630-2008)7 、 flared type adjustable end bend pipe joint (GB/T 5631-2008)8 、 flared type combined bend pipe joint (GB/T 5632-2008)9 、 flaring type adjustable end to end three way pipe joint (GB/T 5633-2008)10 、 flared type combined bend three way pipe joint (GB/T 5634-2008)
We have three foundries, and our main products are casting iron products for construction and water treatment field. We are willing to join in hands with both new and old clients to make the most sincere communication.Please contact us.

1. Manufacturer Overview

Location Shandong, China (Mainland)
Year Established 2006
Annual Output Value US$10 Million - US$50 Million
Main Markets North America
South America
Eastern Europe
Africa
Mid East
Western Europe
Company Certifications ISO9001

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Qingdao
Export Percentage English, French
No.of Employees in Trade Department
Language Spoken: 11-20 People
b)Factory Information  
Factory Size: 5,000-10,000 square meters
No. of Production Lines 3
Contract Manufacturing OEM Service Offered Design Service Offered Buyer Label Offered
Product Price Range High and/or Average