Copper Conductor Xlpe Insulated and Pvc Jacket Steel Tape Amour Power Cable
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Quick Details
| Place of Origin: | Zhejiang, China (Mainland) | Brand Name: | cnbm | Model Number: | VV YJV VV22 YJV22 VV32 YJV32 VV62 YJV62 VV72 YJV72 YJLW02 YJLW03 KVV |
| Insulation Material: | PVC or XLPE | Type: | Low,Medium and High Voltage | Application: | s electric power distribution networks or industrial installations |
| Conductor Material: | Copper or Aluminium | Jacket: | PVC or PE | Filler: | Non-hygroscopic Polypropylene(PP) |
| Binder Tape: | Non-woven fabric | Metallic Armour 1: | Galvanized Stainless Steel Tape Armour(STA) | Metallic Armour 2: | Galvanized Stainless Steel Wire Armour(SWA) |
| Metallic Armour 3: | Non-magnetic Steel Tape Armour(only for single core) | Metallic Armour 4: | Aluminium Wire |
Packaging & Delivery
| Packaging Details: | wooden drum; iron-wooden drum or steel drum |
| Delivery Detail: | Depending on the quantity |
Specifications
2015 new product electric power cable
1 Conductor:Copper or Aluminium
2 Insulation:PVC or XLPE
3 Voltage:Low/Medium/High Vol
2015 new product electric power cable
Technical Parameters of our Power Cable
1). Standard: IEC60502; GB/T12706;IEC 60840;IEC62067;GB/T 11017;GB/Z 18890
2). Detailed description or construction:
* Conductor: compacted or uncompacted copper or aluminium
* Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC)
* Filler: Polypropylene filament with lapped binding tape
* Binder: Binding tape
* Inner sheath: Polyvinyl chloride (PVC)
* Armour: Galvanized steel wire armored (SWA) or steel tape armored (STA)
*Sheath: Polyvinyl chloride (PVC)
3). The rated voltages U0/U(Um) of the cables considered in this standard are as follows:
U0/U(Um) =0.6/1(1.2)-3.6/6(7.2)-6/10(12)-6.35/11(12)-8.7/15(17.5)-12/20(24)-12.7/22(24)-18/30(36)-19/33(36)-26/35(40.5)KV
4). Voltage:
0.6/1kV, 1.8/3kV, 3.6/6kV, 6/10kV,6.35/11kV, 8.7/15kV, 12/20kV,12.7/22kV, 18/30kV,19/33kV,26/35kV
In the voltage designation of cables U0/U(Um):
* U0 is the rated power frequency voltage between conductor and earth or metallic screen for which the cable is designed;
* U is the rated power frequency voltage between conductors for which the cable is designed;
* Um is the maximum value of the "highest system voltage" for which the equipment maybe used.
5). Application:
For laying indoors, in tunnel or cable trench with large difference of level able to bear external mechanical forces.
6). Marking: According to the customers' requirements
FAQ
· Can we make an OEM order?
o We can offer or supply goods as customers' requirements.
· How can I get some samples? Free or not?
o We can send some normal samples, absolutely free.
· How does your factory do regarding quality control?
o "Quality is priority." We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 , SGS authentication, CE for Europe, etc.
- Q:So, recently i purchased a new graphic card and it requires two 6 Pin PCI Express Power Cables. My current power supply generates 650W and only has 1 six pin PCI express power cable. Im at a loss to what to do now. Do i purchase a new power supply that has more pci express cables? Or do i open it up and add a new cable? Thanks if you can take the time to answer my question.
- you can purchase a molex to 6 pin pci express power adapter, this will fix the problem. This solution will work only if you have a spare molex connector you are not using Forget about what that other person said, that your power supply isn't big enough. 650w is more than enough to power a mid to high range graphics card
- Q:I have an electrical source 220 Kv or 380 KV at site X and want to pull cables to site Y to privde electricity for this Y site for general lighting and power sockets.So what is the max distance for the cables i can pull from site X without voltage drop affect the voltage or power at site Y.
- You are not providing enough information. 220 KV can provide power of TENS of miles on reasonably modest cable PROVIDING the current drain is not too high. Sorry but the idea of anyone playing around with almost .4 MV without the first idea about loading / cable diameter / insualtion requirements scares the crap out of me! Without the required information, all I can say is With the right cable at 380KV , hundreds of miles As an aside, if this is a temorary site, then the cost of buying generator will be WAY cheaper than the cost of the cable and transformers you wil require to turn 380Kv into 110 / 220V If a permenent fixture, then suggest for normal lighting and sockets (as in no industrial smelting plants!), then you would eed to be dropping the voltage either at the 380kv site OR at least some distance from the new fixture. Houses do not typically have .4 MV coming into the cellar. It might arc a few metres you see if the air is a little humid. Make things a bit dodgy. **UPDATE** Ok, thanks for clarifying the voltage. Now we also know power too -so at 220v, and about 12KW we are looking at VERY roughly 55 Amps. 25mm cable ought to be good for a couple of hundred metres or so. 16mm for upto 50 metres or so. If a LOT further than that, then either go with three phase/380 OR up the size of the cable. Problem is it can start getting pricey. The shorter the run, the lighter the cable can be - to a point - would NOT suggest going below 10mm under ANY circumstances. You will always get SOME voltage drop, but providing it is in the order of a couple of volts here and there, there is no appreciable waste / heat generation. Is this a fixed installation or a temporary one - if temporary and a fair distance away I would STILL be inclined to sugges a genset hire might work out cheaper than drums of suitable cable.
- Q:Copper and Aluminum are being considered for the cables in a high-voltage transmission line where each must carry a current of 50A. The resistance of each cable is to be .15ohms per kilometer.A. If the line carries power from Niagra Falls to New York (500Km), mow much power is lost along the way in the cable? Compute for each choice of cable materialB. the necessary cable diameterC. mass per meter of cable Please correct if you see anything that may be offSolving for part a:Power = I deltaV, since deltaV was not given IR=deltaVso Power = (I^2)R = 50^2 x 75 = 187.5 kW lt;-- answerR= 75 since R= .15 ohms/ km x 500kmB) resistivity of copper = 1.7 x 10^-8 ohm m resistivity of al = 2.82 x 10^-8 ohm m R = (resistivity x length)/Areawhat do i use for R? is it the 0.15 ohm/km or 75 ohm?using the 75 ohm as R, I get that the radius of the copper wire is 0.0000361 m and the diameter is then 0.0000722.Am i on the right track?
- I think you went wrong with the length. If R= (resistivity x length)/Area, make sure you are using length as 500,000m as the units should be in meters, not km. R is going to be 75 ohms because you are considering the entire length. Then solve for area and radius.
- Q:I've got a 1994 Mitsubishi Eclipse GS 1.8 and I can't find any place to put the amp cable through the firewall! Any tips would be greatly appreciated. Thanks ;).
- Just adding to the grommet guys answer above: Just as important as the grommet; a fuse. You must have a fuse as close to the positive battery terminal as possible. Why?, you say? If, for whatever reason your power wire shorts out to the frame somewhere between your battery and your amp, what's going to prevent that wire from turning into a giant heating coil running the length of your car, and torching it. I've seen it first hand many times. And, no, the fuse at the amplifier, the fuse in the distribution block (if you're using one) or any other fuse other than a fuse at the battery won't do a thing for you power wire unless it's before the potential short. Like at the batttery... In short, the grommet prevents the short at the firewall. The fuse protects it in case it does it anyway.
- Q:I'm lost i cant find a hole in my ford c-max firewall to install my power cable for amp can someone help me as i am traveling this sat to France by car .
- In most vehicles there are spare holes filled with rubber plugs. Pop one out with a screwdriver and make a hole in plug a little smaller than the size of the wire for a very tight fit. If it's a smaller size power wire, it can sometimes be run through the same grommet as the vehicles main harness. Be very careful not hurt the existing wire. I have seen people get careless and screw the harness up and it's not easy or cheap to fix. When doing this I usually use a stiff wire (a small diameter yet long screwdriver can work too) and slide it through the grommet. I then use electrical tape to secure the power wire to stiff wire and pull it through. Make sure your penetration point is still leak proof after doing this. You may need to use some silicone and or electrical tape to seal it up.
- Q:I lost the power cable to my Dell printer 922. Can anyone help me find the cable online, or at a store. Dell told me they don't sell the cable. thanks for the help!! =]
- visit OKorder
- Q:What does the watt rating mean on amp power cables?
- watt is the unit of power or amps that you can push through a cable without burning it up. So if its rated for 40 to 400 you cannot add more or it will blow a fuse or melt.
- Q:i bought a new graphics card a while ago, an nvidia 9400gt (i now realize how LOL that is). i connected it, but i noticed there were no extra power cables hanging around that would fit on the small six pin slot on top of the card. the performance increase has basically been negligible, and i don't really want to mess with the power box. should i take it into a computer shop, or is there an easier solution?yes, i installed it correctly and everything. i'm 100% sure.
- i does not subject with a GT220 or GT240, they are not lots better if no longer worse than the cardboard you have already. those are not gaming enjoying cards, they're particularly for video accelerating etc. Get a HD 4850 in case you will stumble on one, if no longer maybe a HD 5750 which grants comparable overall performance, yet i does not bypass above this as you will start to be bottlenecked via your processor. maximum enjoying cards merely take one 6pin connection, the only exception being the perfect end enjoying cards such because of the fact the Nvidia GTX 470 or ATI HD 5870. desire i've got helped ;)
- Q:I asked before about installation of power and control cable in the same conduit .. I think it is not a good practice.. I want to ask about installing 2 power cable each 480V in the same conduit ..Also I want to know if it is mentioned in any standard like NECthx
- You can as long as every cable in the raceway is insulated at least for the maximum voltage in the raceway. NEC 300.3 (C) (1). You also need to consider raceway fill limits, and ampacity derating for 4 or more current carrying conductors.
- Q:ok so i opend up my machine, and i bassicly took apart the processor and removed the dail up pci card thingy, then i put it all back together and i also took off the case, which meant removing all case power leads, quot;power SWand power led etc. but i put them all in the same place i took them out, well i think i did, theres so many different slots it they could go into, it would take at least 500 attempts to find the right slots for all, not to mention the fact i might blow the board. so has anyone got the manual for this motherboard. or no where to find an online one. cus i need to know where to plug them in. thanks
- hi bradley we have all been there before.... rebuilt a pc and forgot which connectors go where on the motherboard.... however if you go to your motherboard manufactuers website you should be able to download the motherboard manual which will have a detailed diagram showing you were each connector goes however in theory you can get away with just plugging in the power connector ( power sw ) ....and it wont do any harm trying each combination... however i would recommend trying the top row of pins... and make sure you insert the connector horizontally as you look at it for example check this image of the power sw connector properly connected ( img204.imageshack.us/img204/8682/... ) .....as you can see the power sw is using pins 3 and 4 on the back row of pins.... so give that a try firstas i stated you wont blow the board..... ive seen people use screwdrivers to start their motherboards .. and this is done by shorting two pins.... so theres no way you are going to blow your motherboard..... however i would try to locate your motherboard manual first.... and failing that try my method.... and a good idea is to draw a diagram of your motherboard pins ... then as soon as you have tried a combination mark it off.... at least this way you are not going to try the same combination twice i hope this has helped,any problems let me know good luck bradley !
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Copper Conductor Xlpe Insulated and Pvc Jacket Steel Tape Amour Power Cable
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Related keywords
