Flush Valve, Concealed Flush valve, In Wall Flush Valve
Product Name: Flush Valve, Concealed Flush valve, In Wall Flush Valve
1) Material: brass
2) Function: Water saving, self-closing
3) Flushing rate: 4-10 seconds, about 6L water
4) Usage: Used in public toilet in order to save water, easily operated by hand
5) Advantage: in high polish and plating finish, elegant appearance, easy to install and uninstall, covenient to operate, accessories can be supplied according to customer demand, inlet and outlet diameters can be chosen.
6) Biggest Product Design Advantage: This product and GS-8106B are to be used in-wall, that is to say, only operation button can be seen on the wall. Well, for this product, we have several different button sizes choices for our customers. Can be mini, can be big, and the promise is it is easy to push the button and flushing effect is excellent~
Product Packing Info:
Net Weight (KG/pcs): 2.4
Gross Weight (KG/ctn): 16
Package (pcs/ctn): 42
1 bubble bag/pc
Carton Dimension (CM): 57.5 X 27 X 26
- Q:Toilet squatting tank flushing or good flush valve
- Flushing tank is better, because do not know when the home water, and there are always accidents. The advantage of the flush tank is to be able to water, the pressure on the water pipe is not demanding, the disadvantage is that the volume is big. The flush valve instead.
- Q:Old delay flushing valve does not delay how to do
- It may be four bad, you can go to after-sales maintenance of the
- Q:How to do the flushing valve leaks
- Flush valve works: When the water from the inlet into the water tank, the drain is pressed by the rubber film, can not drain. As the water level rises, water flows through the hole A through the hole and flows from the hole B into the elbow. As the rubber membrane is equal to the upper and lower water pressure, still hold the drain. When the water level continues to rise above the highest point of the elbow, the water will flow through the pipe into the drain. As the hole B is greater than the hole A, the water through the A hole when it is subject to greater resistance, pressure is also lost, so the ball within the crown to reduce the amount of water will appear at the top. At the same time, the upper pressure of the rubber membrane is drastically reduced, and the lower pressure is equal to the pressure of the atmospheric pressure plus the pressure generated by the water. It is much larger than the upper pressure, the rubber film is protruded and the drain is opened, and the water in the tank is discharged rapidly (about 10 seconds). When the water level in the tank drops, the water in the ball crown can still be discharged through the elbow due to the siphon phenomenon, keeping the vacuum present, so that the rubber film will not move down. When the water in the box is finished, the rubber film rubber mold is pressed again Drain, re-water storage. If the water flow in the inlet is controlled, the drainage cycle can be determined. So the cycle, so that the toilet can be automatic, regular rinse. This is the working principle of the toilet flushing valve.
- Q:Hand operated toilet flush valve works
- Different places of the toilet with the flush valve is different, there are induction, pedal, manual three toilet flush valve, there is a water tank is a toilet flushing, the principle of their flush valve are Different. Public toilet is a relatively large flow of people, it should first consider the conservation of water, followed by the use of large flow of water, the impact of a one-time washed dirty things, it is the principle of the use of the bucket placed in the height, the use of water potential To work.
- Q:Squat pan flush valve has been how to do water
- Do not repair or change the inside of a part of it, my home is.
- Q:This flush valve can not close the water how to repair?
- Home platform Xiaobian have something to say - contact the seller, replaced ah
- Q:Whether the flush valve is a good hand or a good hand.
- Flush valve hand press, the water quickly, large water. Hand twist the water is not too big. To say that kind of good, but also to see where used?
- Q:What is good for the flush pallet flush valve?
- The flushing equipment with a water tank, especially the water outlet valve for the tank. The flush valve comprises a water tank seat, a valve body, a movable shaft and a pull wire, characterized in that the bucket is provided with a top opening in the upper part of the valve body.
- Q:Bathroom flush valve problems, how to repair the water has been
- Replacement, install a new one. Such valves are generally unable to repair.
- Q:Is the size of the flush delay valve for the toilet uniform?
- Second, we can also use the ruler to measure the inner diameter of the inner wire joint (not the diameter of the water pipe), if the inner diameter is about 2.5cm, then 6 points (DN20) flush valve; if the inner diameter is about 3cm, Then one inch (DN25) flush valve.
After years' hard work and development, now our company becomes one of the leading enterprises in the field of faucets, toilet sets and shower products production and sales.We always keeps "Based on People, Winning for Quality" as our sales motto. We look forward to receiving your detailed correspondence in the near future.
1. Manufacturer Overview
|Annual Output Value
||US$50 Million - US$100 Million
||30.00% South America
30.00% North America
5.00% Eastern Europe
2.00% South Asia
2.00% Southern Europe
2.00% Northern Europe
2.00% Central America
2.00% Western Europe
2.00% Eastern Asia
2.00% Mid East
1.00% Southeast Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||51% - 60%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range