composite decking flooring WPC board / Hollow and grooved WPC
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 2000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Main Features of the WPC Decking：
1. Recyclable, Eco-friendly, saving forest resources
2. With the look of the natural wood, but less timber problems
3. Moisture/water resistant, less rotten, proven under salt water condition
4. Barefoot friendly, anti-slip, less cracking, less warping
5. Requires no painting, no glue, low maintenance effort
6. Weather resistant, suitable from minus - 40 to 60 centigrade degree
7. Termites and insects resistant, and moldy-proof
8. Easy to install and clean
Specification of the WPC Decking:
component | 30%HDPE(Grade A Recycled HDPE) 60%bamboo/wood fiber component 10%chemical addatives New material capped outside |
Size | 140X20mm |
Design | Solid decking |
Length | 2.9m/pc standard length, also from your required |
Surface treament | original, sanded, brushed |
Color available | 5 regular colors for choice ( IPE,Walnut,graystone,Cedar,Rosewood) and we can adjust the new color according to the order requirement |
Cerfiticate | ISO9001, ISO14001, CE, FSC Certificate,"REACH"Test Reports by SGS; Intertek Test Report by ASTM standard..etc. |
Images of Co-extrusion WPC Decking:
FAQ of Co-extrusion WPC Decking :
1. Available Colours?
5 regular colors to choose ( IPE,Walnut,graystone,Cedar,Rosewood )
2. How to Install?
3.Treatment for Option
- Q:How to deal with composite floor cracks
- The use of the floor for a long time, there will be damage, cracks, then how to repair the cracks in the floor? Do not worry, the floor cracks, the following methods can be used: with putty and paint mix well embedded cracks, can not bad for many years. Cut the old newspaper into debris, add alum and water, boil into a thick paste, and then use a knife to paste the paper into the cracks, after the dry is very strong. With cotton or broken sacks burn ash, and then stir with raw tung oil into a paste, embedded in the cracks in the floor. After the dry can be very strong. Buy "bakelite powder" with the dish Sheng, drip into the water and stir to the slurry, and then brush the cracks, a little spray into the water, fill in the bakelite pulp can usually be a night time bakelite pulp can be dry through the hard, Wood flooring can be trampled as usual.
- Q:Can tile flooring be on the floor?
- Can, and tiles to install the wood floor is better than the cement better, because the installation of wood flooring requirements of the ground floor of the floor height is higher, the ground flatness difference of more than 0.5 cm, then stepped on the empty, it will creak creak Of the ring, very annoying. Tiles installed on the floor will not have this situation, but the only drawback of tile installation floor is the impact of the height of the house, it seems a little shorter. But it will not be too obvious, because the wood floor of the last general only 1.8 cm, the thinnest 0.8 cm, it is recommended that you install 1.2 cm. I believe you can rest assured that the equipment, certainly no problem, I have done more than six years of the flooring industry, so I see more of the problem. There is doubt you can also go to my shop to question hair dug out of the exhortation of non-stone single Insider.
- Q:Dell to strengthen the composite floor 12mm thick price in the number? Flooring will not be deformed more
- $ 160 or less. If there is no special circumstances, 10 thick enough. (Such as your guest is the first floor, nursing pulp can be combustor puughes Ge Xue grinding, such as the ground drop large situation) 10 thermal fast, there is no difference, is a thick one thin. Of course, thick is not easy to change, but inside the chemical composition is not more than thin it? 10 is also very good, you can rest assured that the use, do not have too much worry.
- Q:Yesterday forgot to turn off the water, so the two rooms of the composite floor Geng Gong blunt blossom yellow fake riveting all bubble in the water, and now the surface of the water has been disposed of, but there are water underground floor, the Internet Some people say that there is no big problem to dry, and some people say that the floor should be set off to dry the shop again, really do not know what kind of practice better, please help out, give suggestions? Thank you! More
- Puff board treatment is very troublesome. It is recommended that you all set off all dry and then paved again. Do not sun.
- Q:Can you make your own flooring?
- Of course you can, you need to have a certain experience in the installation of woodworking. The general situation is to buy a composite floor package to the foot line package installed.
- Q:the underfloor heating guys are screeding heating mesh to conctrete floor. I need to know the procedure for gluing an engineered floor to screed. thank u.
- If I were you I would contact the flooring manufacturer for their recommended procedures rather than soliciting advice that may or may not be correct for your situation - ask the heating guys what material they are using to float the floor with so you can get the correct info
- Q:What do you need to pay attention to the installation of composite flooring?
- 1, clean the ground before installation. Especially where there is a "tumor" to eradicate. 2, will be wired, telephone lines, network cable layout. 3, if the wall of the heating tube too thick too deep, it is best to fill with dry sand. Do not use cement to seal! 4, if there is water pipes, heating pipe transformation must notify the installation of the master, so as to avoid accidents! 5, sprinkle the floor medicine, corner and door to sprinkle more. 6, asked the installation of the master will be under the door saw the saw, so that the floor inserted in the door under the set, so install more solid. 7, paved waterproof mats, if it is geothermal ground, must be used for geothermal mats. 8, before the installation of the best box to open, check the floor surface there is no corner (this situation is very small, but also to prevent). 9, be sure to keep the floor and wall 8mm telescopic space. 10, be sure to let each room into a plate. (At the door off, leaving the telescopic space) if it is a large area, each break 8-10 meters off once. 11, the installation of kicking angle, the best use of yin and yang angle, because the use of the yin and yang angle, kick the corner joints will be strong. 12, floor and kitchen floor tiles connection is best equipped with copper or stainless steel bar, do not use ordinary plastic strips. 13, before the completion of the installation must be fully accepted once again. 14, gold home building materials one-stop supermarkets all kinds of decoration materials are welcome to buy Oh!
- Q:My family for many years before the shop floor of the solid wood flooring taste of bamboo stalks mixed when the full river, and now some places have been blisters from the drums. Now someone in order to pursue foot feeling, want to shop in the solid wood flooring directly on the floor, consult experienced friends, so what is the problem? (My home in the north, 9th floor) Also, if the demolition of solid wood flooring, re-leveling the ground, with a good cement or a big board? Thank you so! Question added: if the solid wood over the shop, how much higher than now? My house is only 2 meters high. More
- Solid wood flooring should be done to the keel, and since the bubble over the water, the keel may be rotten, or re-pave it!
- Q:To warm on the floor can shop wood? What is the ground? To warm on the floor can shop wood? What is the ground? More
- To warm on the floor can shop wood? What is the ground? To warm on the floor can shop wood? What is the ground? More
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
composite decking flooring WPC board / Hollow and grooved WPC
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 2000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
