Color Monitor 10&Quot; LCD Display

Ref Price:
$1.00 - 100.00 / pc
Loading Port:
Shenzhen
Payment Terms:
L/C,T/T
Min Order Qty:
10 Pieces or sample available pc
Supply Capability:
5000 Piece/Pieces per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

color monitor 10" lcd display                                                                       

 

Product details for 10 inch monitor touchscreen

 

Name9.7″ Digital TFT Touch Monitor
ModelYT10
Description9.7″ TFT Touch Monitor
Case/Bezel ColourBlack/silver
Touch monitor PerformanceStandard
Display Type4:3 Ratio 9.7″Active Matrix TFT LCD
Active Display Area196.608(W) X 147.456(H) mm
Native Resolution1024 x 768@ 60Hz _1600 x 1200 @ 75Hz
Sychronization Range30-80 KHz horizontal, 55-75 Hz Vertical
Pixel Pitch

0.192mm x 0.192mm

Pixel Response Time Rise + Fall (Typically)12ms
Plug and PlayVESA DDC 1/2B
On Screen Display (OSD)Remote OSD
Colours16.7 million
Brightness300 cd/m2  (400cd / m2 optional )
Contrast Ratio Typically800:1
Viewing Angle Horizontal (left/right)170° (85°/85°)
(From Centre, CR>=5) Vertical (up/down)160° (70°/90°)
LED Backlight life Hrs50,000
Input Video FormatAnalog RGB/CVBS NTSC/PAL (AUTO)
Operating SystemDOS/Window 9X,ME,2K,XP,7Vista,NT,CE,LINUX, Mac
Touch screen InterfaceSerial COM (RS232) or USB
Touch Response Time Serial/USB10.4ms
Touch Pen Hitting Life>= 1milions times
Touch SensitivityFixed
Monitor Dimensions

268 x 199 x 41(mm)

Shipping Carton Dimensions

308*300*100mm

Provider Weight (approximately) Monitor/Shipping2.5kg
Power SupplyExternal: 110V-265VAC, 50-60 Hz 
Power Consumption<20 W Typ
Temperature RangeOperating:-10°C-60°C, Storage:-20°C-80°C
Relative Humidity Non CondensingOperating:10%-90%,Storage 5%-90%
Warranty1 year
Agency ApprovalsFCC, CE, RoHS

 

 

Features for 10 inch monitor touchscreen

 

1.Adopt industrial LCD screen, high native resolution of 1024*768, High contrast and brightness, wide viewing angle, which greatly improve the image layering.

 

2.One of the world's most high-precision four wires resistive type touch-screen for PC display. (USB port/COM RS232 optional)

 

3.Sensitive touch-screen, quick response


4.Standard VGA (15 pin D-SUB RGB) and Two RCA/BNC video input

 

5.Built-in speaker amplifier/PC audio input and earphone jack


6.Operating All Systems: DOS/Windows 9X ME 2K XP 7 Vista NT CE / LINUX / Mac,etc.


7.Can support almost all kinds of resolution


8.Low radiation and consumption. High reliability, good stability, especially for work in harsh environments.

 

 

Touch optional for 10 inch monitor touchscreen

 

Resistive Touch 

4-wire 

5-wire

8-wire

Glass Type(thickness)

Ordinary thickness 1.5mm

Adjustable thickness 3mm

Touch Mirror

Import protection film

Anti-reflective, anti-glare

 

 

Accessories for 10 inch monitor touchscreen

 

VGA cable
Touch USB cable
Video/audio cable
BNC cable (optional)
Remote 
Power Supply Adaptor
Power Lead(US,EU ,UK etc type)
Software touch driver CD
User Manual (English)
Touch Pen
Bracket

 

 

Typical Applications for 10 inch monitor touchscreen

 

 Entertainment /Casino Systems

Outdoor and indoor Kiosks
Entertainment
Transport and Ticketing
Television station
Education
Exhibition
Advertisement
Hotel/Hospitality
Car PC
Industry equipment
Banking
Customised Solutions

 

 

Why we choose Okorder.com?

Okorder.com is a professional and reliable online E-market place

Providing a variety of products with reasonable prices

High quality goods provided by factory suppliers

Shipping to over 200 countries.

One-stop sourcing

Dubai Logistic Complex

 

Okorder Quality Control?

We hold a very strict quality control system to check every connector of our products for your safety.

 

Okorder services for you

1. We will reply you in detail within 24 hours

2. We own well-trained and professional sales and after- sale services who can speak fluent English.

3. We offer OEM services and can print your own logo on products.

4. We have strong ability to do ODM projects. 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:LCD LCD and LED which is good?
CCFL (cold cathode fluorescent tube) backlit LCD (liquid crystal), usually referred to as CCFL backlight LCD for LCD. The use of light-emitting diode LED backlight LCD referred to as LED. LED backlight than CCFL backlight LCD to thin. LED backlight LCD than CCFL backlight LCD power saving, electro-optical conversion rate of about 99%. The LCD electro-optic conversion rate of CCFL backlight is 90%. LED backlit LCD has higher LCD brightness than CCFL backlight, and LED backlit LCD can be seen in the sun. The traditional CCFL backlight LCD brightness is low, can not watch the screen in the sun. LED backlight LCD color is bright, color gamut up to 118%. The LCD color gamut of CCFL backlight is only 78%. Under normal circumstances, it is difficult to tell whether it is CCFL backlight or LED backlight, but in the sun you will see. LED backlit LCD brightness is relatively high. LCD backlight or LED good?. LED backlight is of high brightness and can not be used for a long timeYou can try it
Q:PHILPS 23 inch LCD is always black screen?
The display inside, a different host on the IC display MODE choice is not the same, when the old host MODE=1 (high), just use a CLK1 display, the new host MODE=0 (low), CLK1, CLK2, CLK3 display used to respectively control the three RGB transmission, as long as one of the CLK instability may flicker and when receiving an external interrupt signal may also affect the back of the two clock signal, resulting in black - IC display NG conclusion;
Q:Why is LCD always bright when dark?
This is the automatic energy saving mode, or the eye protection mode, eye protection mode.. Just find it on the menu and turn it off..
Q:How about the flash in the middle part of LCD?
Causes of flash in the middle part of lcd:First, the low screen refresh rate: open the display properties panel, click Advanced, and then select the monitor column and then to the inside of the "only display support maximum refresh rate" in the box next to the point right, then click the refresh rate of the marquee, the highest frequency can choose inside.Second, electromagnetic interference display: next to what is a large electrical appliances, or degaussing sound speakers, such electrical appliances will interfere with the electromagnetic display, so that the monitor away from this type of electrical interference can.Third, monitor aging fault: the two kinds of methods can not solve the case, the monitor may be aging or failure, the best repair.
Q:Why does LCD change color from side to side?
Simply say that the polarization imaging results, so the LCD products have some perspective, belongs to the angle of color liquid crystal display, professional IPS is the wide panel, color will be better, the new product is the LED backlight IPS display panel, combines the advantages of the latest technology, now the price has been very easy to accept, at present 23 inch AOC products are $1400, $1700 in LG
Q:Maintenance of liquid crystal display
Daily maintenance points:1 、 liquid crystal display for a long time do not use, please turn off the power or set the host for power-saving mode.2, as long as possible to reduce the use of bright white screen for a long time, these two points can slow down the aging of the tube, and extend the service life of the monitor.3. Keep the storage and use environment clean and correctly clean the screen surface.4, away from the high temperature and humidity environment.5, no liquid upon screen and machine.6, strictly prohibit extrusion impact screen surface.7, avoid unnecessary vibration.8, do not disassemble and disassemble.
Q:Do all LCD displays have power adapters?
Having an outside, no outside, just inside the display.
Q:Is the LCD screen dimmed?
Right click on desktop - Graphical attributes - color correction - brightness, drag blocks to enlarge brightness - apply - make sureHave a try.
Q:Can the liquid crystal display be squeezed gently?
The LCD screen, we do not want so fragile, but such a long time after the extrusion, there may be a phenomenon that is in force will appear near the spot, but does not affect the use. The problem of workmanship, there is no way, this phenomenon will not be easy to bad.
Q:LCD color is a bit dark
You can check if your LCD has dynamic contrast (DCR) function, and if so, set it to 'close'.This should be the display of the tuner or instability caused by power supply.Find the 'Auto color' or'Auto level'option (general display for the former); find a black and white picture (only black and white colors of the two picture), open, full screen, and then the factory menu cursor to' Auto Color 'through the key move, and then press OK (MENU). After the monitor OK, quit the factory mode to see if the problem is resolved.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range