||Acrylic,Resin,Stainless Steel,Steel,Sandwich Panel,Wood,Ceramic
||Fireproof Board Ceiling,Soundproof Ceiling,Normal Ceiling,Integrated Ceiling,Heat Insulation Ceiling,Moisture-Proof Ceiling,Mould-Proof Ceiling,Smoke-Proof Ceiling,Waterproof Ceiling
||Office,Hotel,Household,Dust Free Room,Public
Color Coated Aluminum Coil AA5005 Aluminum Alloy
|Series: ||3003 3004 3005 etc.|
|Series: ||5006, 5052|
|Series: ||8011 etc.|
| Plate Thickness ||0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm|
|Coil Thickness||0.1mm, 0.12mm,0.15mm,0.20mm,0.25mm,0.28mm,0.3mm,0.35mm,0.38mm, 0.4mm,0.5mm, 0.53mm, 0.58mm,0.68mm,0.7omm,0.73mm,0.75mm, 0.90mm, 1mm, 1.2mm|
AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc , etc.
H16, H18, H24, H26, H28
From 0.1mm to 1.2mm
Standard width:1240mm, 1270MM
Special width:1000mm, 1200mm, 1240mm, 1270mm, 1520mm, 1620mm
Interior dia: 150mm,405mm, 500mm, 505mm, 510mm
outer diameter: 1200mm
2.5 T/coil,3.0 T/coil
PE:>=16 micron , PVDF:>=25 micron
As per customer’s request
PVDF, PE(Polyester), epoxy, polyamide, polyurethane
Soid, metallic, high gloss,stone,timber,brush,mirror,sparkling, RAL or by customer requirements.
As per customer’s request
|Surface||Embossed, mill finish, coated|
|Coating Hardness (pencil resistance)||More than 2h|
|Impact Resistance||No peeling or cracking(50 kg/cm)|
|Application||ACP,wall cladding,facades,roofs and canopies,ceilings,signboards,blind window,display platforms,electrical panels,etc|
|Coating Thickness||PE coating:more than 16 micron|
|PVDF coating:more than 25micron|
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
- Q:What are the dimensions of the aluminum slabs used in the bathroom ceiling?
- 300 * 300,300 * 450,300 * 600, these specifications of the aluminum buckle board with more, put out the effect of more beautiful fashion, and easy to fight modeling, long aluminum buckle in the bathroom ceiling is not recommended, Can be used in the tooling.
- Q:Where is the line to be done
- Aluminum plate closed edge is done on the wall, you can use the expansion screw and glue the way fixed fixed edge, and then install the aluminum plate.
- Q:What is the characteristic of the ceiling plate?
- Relative to the gypsum and fiber concrete plate, its weight is almost negligible, greatly reduce the construction workers labor intensity and construction load, and the scene only for assembly work, its product quality is not affected by the site environment, construction period is short, greatly improved working conditions.
Relative to the plastic buckle board, which does not change color is not aging, in the high temperature and humidity environment performance is better; can be repeatedly removable plastic buckle can not be the advantages of this.
- Q:How to remove aluminum ceilings
- The first to use the first toilet to remove the other hand can buckle down
- Q:Aluminum buckle board edge of this used to do
- Is used to fix the need to cut off the buckle to make the gap between the pinch and the edge of the minimum in the fight when the glass glue more beautiful look good, no cut on the need not directly on the line
- Q:What is the difference between mineral wool board and aluminum ceiling?
- Aluminum slabs are usually used in home improvement market.
Because it is generally used in the kitchen bathroom, when used the most important concern is the effect of oil and water.
Aluminum plate, especially the roller coating of the durability of the protective effect is better
Mineral wool sheet is mainly used in the engineering market. Such as offices, large public places. This kind of place is relatively important for the fire function. For this aspect more value.
The use of different categories, according to the specific purpose of use to choose.
- Q:Gypsum board smallpox is what things? Easy to use? With aluminum ceiling than how?
- Home furnishings gypsum board, kitchen / Wei can use gypsum board, aluminum-plastic plate, aluminum plate, buckle board, sound-absorbing panels, grille; tooling with gypsum board or sound-absorbing panels or grille ceiling
- Q:How to distinguish between aluminum plate and what kind of board board
- The difference is that the surface coating is different, the lowest price of film, followed by rolling, and then the next nano. General home improvement, roller the most appropriate. If you pay attention to style with the general European-style idiots with nano-aluminum plate, modern with roller coated aluminum plate. Laminating has been useless, because easy to oxidize discoloration, according to your price on-demand purchase, personal opinion of the kind of high-end oxidation is not necessary, that is to cover a ugly, good clean fumes.
- Q:Aluminum buckle plate can be installed into a ceiling of Yuba it
- Can be installed.
◆ Yuba installation - stay line (wire):
1. The general light warm type bath requires 4 sets of lines (light warm two groups, ventilation group 1, lighting 1 group) by the five wires (top of the above is a zero line 4 control FireWire, the following switch is a FireWire, 4 control fire line)
2. Wind-warm Yuba (PTC ceramic heating plate heating) requires 5 sets of lines, (lighting 1 group, ventilation group 1, PTC heat sink 2 group, internal circulation blower negative ion group 1)
◆ Yuba installation - outlet
The ventilator requires a tuyere to suck out the indoor air. The diameter of the outlet is generally 10CM, generally in the ceiling before the open well.
◆ Yuba installation - installation of the reserved port
◆ general Yuba hole for the 300 * 300, there are Yuba openings for the 300 * 400 or so. There are some differences between the requirements and methods of the reserved mounting ports depending on the different gussets:
1.300 * 300 or 300 * 600 aluminum plate hanging ceiling: stay a 300 * 300 buckle plate position can not be installed.
2. Striped aluminum bar, it is best to install the buckle plate when the size of the opening of the Yuba, in the installation of the buckle when leaving a good installation hole in the hanging on the preparation of two than the ceiling of the main keel span more solid Of the wood, do install Yuba use.
3. Plastic gusset plate, basically the same as above
4. Waterproof gypsum board ceiling and sauna board ceiling, because to confirm the location of the keel, please also install the buckle when the Yuba installation hole size to determine the installation.
- Q:Aluminum plate, aluminum veneer, aluminum roof, aluminum alloy perforated panel difference?
- Aluminum plate is usually used in indoor ceiling, the thickness of 0.5 to 1.0 thick, the specifications are bar and square plate and divided into film and roller, etc., aluminum veneer is usually 1.5 to 3.0 thick surface electrostatic Spray and paint, etc., can be used inside and outside the wall
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range