Selling Carbon Steel Sheet
2.Grade: ASTM A516 GR.70Q235B/Q345B/Q345C/S235 JR/S275 JR/45#.
Carbon steel plates
1500-3600mm or as your requested
as custom's request
Cold rolled or hot rolled
Bare, galvanized coated or as customer's requirements.
SAE1010,SAE1020,SAE1045 Q195,Q235,Q345,SS400,ASTM A36,E235B
Used in home appliances construction, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc.
Terms of Payment
L/C or T/T
Within 3-15 days after receipt of deposited or L/C at sight
- Q:What are the European E1 grade environmental standards?
- When we buy plates or furniture, we often hear such a term: E0, E1 and E2
So what is E0, E1 and E2?
Modern furniture and kitchen cabinets are widely used man-made sheet, in order to make the sheet more robust and durable, wood-based panels need to add moisture-proof agent and adhesive, which is the main source of free formaldehyde.
E0, E1, E2 are a formaldehyde emission limit level of environmental standards, the first E1, E2 these two standards produced in Germany, by the "EGGER" to develop, after the introduction of European standards, many domestic companies claim that the E0 standard In fact, Europe did not, the highest standards in Europe for the E (1/2).
Specific data are as follows: E2 ≤ 5.0mg / L, E1 ≤ 1.5mg / L, E0 ≤ 0.5mg / L. Meet the E0 standard household products, already belong to the international top environmental standards, formaldehyde emission is almost negligible.
E0 is produced in Japan, is the most stringent environmental standards, the equivalent of Europe's E (1/2), according to the plate of formaldehyde and other harmful substances to develop the content.
China's environmental standards for 10-30mg / 100mg, equivalent to E2 standards. E1 level is "can be untreated, completely harmless to humans and animals." E0 level is the spontaneous standard of some enterprises, rather than mandatory standards.
At present the world only Finland, Japan, the two countries to enforce the E0 standard. In China, to strengthen the implementation of the highest standards of the floor is E1, cabinet industry, the national standard only E2, only part of the high-end products are E1.
Therefore, if the purchase of Finland, Japan, the origin of the decoration products, that is, E0-class products, basically can be achieved directly to the standard.
- Q:How to change the cabinet board is not Jilin forest workers dew river plate
- Jilin forest workers are above the plate with the subject, looking at the can see, is a small leaf shape, written above the words of Jilin forest workers.
- Q:Willow eucalyptus wood and pine which is good
- Many businessmen will use cheap wood eucalyptus, Malacca (another produced from Southeast Asia fast-growing cheap wood) core wood blockboard beautification into a "solid wood ecological board", attempt and solid wood detached, confuse, mislead consumers, but its essence Is still the use of cheap wood man-made sheet. The price is there.
Pine, especially New Zealand pine widely used in the production of a variety of pine wood furniture, there are many specialized in the production of pine furniture brand, is also widely used in children's furniture and other fields.
In addition, we must use a lot of glue and increase the risk of formaldehyde release. The plate will also increase the release of formaldehyde during the cutting process, and the same conditions do not have these problems.
Of course, the use of blockboard can save a lot of cost, so for decoration, props production, especially public commercial space project is still very meaningful.
So in general, a kind of wood is not dare to show his face, a large square is made of solid wood furniture wood.
Combined with the actual value of the two woods in reality, and their application effects.
Pine should be excellent and willow eucalyptus wood, Malacca.
- Q:Will 304 stainless steel and 301 stainless steel What is the difference?
- 1, specifications: commonly used stainless steel sheet is divided into 201 and 304 two models, the actual composition is different, 304 quality better, but the price is expensive, 201 worse. 304 for the import of stainless steel, 201 for the domestic stainless steel plate.
2, 201 composition of 17Cr-4.5Ni-6Mn-N, is the section of Ni steel, 301 steel alternative steel. After cold processing with magnetic, for railway vehicles.
3, 304 composition of 18Cr-9Ni, is the most widely used stainless steel, heat-resistant steel. For food production equipment, the former chemical equipment, nuclear energy and so on.
4, 201 is a high manganese content, the surface is very bright with dark black, high manganese content is easy to rust. 304 chrome more, the surface showing matte, no rust. Two put together there is a comparison. The most important thing is the corrosion resistance of different, 201 corrosion resistance is poor, so the price will be much cheaper. And because 201 nickel low, so the price is lower than 304, so corrosion resistance is not as good as 304.
5, 201 and 304 is the difference between the nickel-containing problem. And the price of 304 are now more expensive, generally close to 50000 a ton, but at least 304 can guarantee that the use of the process will not rust. (Can be used to do the experiment)
6, stainless steel is not easy to rust because the surface of the steel body to form chromium-rich oxide can protect the body, 201 material is high manganese stainless steel 304 hardness higher carbon low nickel.
7, the composition of different (mainly from carbon, manganese, nickel, chromium and other aspects to distinguish between 201 and 304 stainless steel)
Steel (C) silicon (Si) manganese (Mn) phosphorus (P) sulfur (S) chromium (Cr) nickel (Ni) molybdenum (Mo) copper (Cu)
AISI (304) ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.03 18-20 8-10
AISI (201) ≤0.15 ≤1.00 5.5-7.5 ≤0.05 ≤0.03 16-18 3.5-5.5
- Q:Density board and Orson board difference
- Densboard (English: Medium Density Fiberboard (MDF)), also known as fibreboard, is made of wood fiber or other plant fiber as raw material, urea resin or other suitable adhesive made of artificial plate. According to their density, divided into high density board, MDF, low density board.
Dust board due to the soft impact resistance, but also easy to reprocess, in foreign countries is a good material for the production of furniture, but because the country on the high density board standards than the international standard several times lower, so the density board in China, the use of quality Still need to be improved.
Orson board refers to: Aosen card in the high density board. Mainly used to strengthen the floor of the substrate, but also for the furniture industry.
- Q:Do pcb circuit board which several kinds of plate
- Fiberglass cloth based composite base paper - based synthetic fiber - based non - woven base
- Q:What kind of timber is the high grade guitar?
- General top or advanced guitar wood selection surface is not particularly large, generally fixed in several kinds of wood, the production of guitar is very much but in the high-grade guitar selection, the available is not particularly much (in addition to some special Creative thinking of the producer's whim). Here I give you a closer look:
Spruce spruce sound grain good, penetrating, cool and bright. It is the first choice for most guitar panels, which is made of German-made (Sicilia spruce) and Canadian (Inman Spruce), with high density, woody charm, hard and easy to process. The Representative Brand: H.Romannillos, Hauser, Martin, Taylor, Gibson.
Cedar cedar sound deep atmosphere, strong sense of sticky, soft and warm. It is good for American-made (western pine) and Canada (Ingersel Cedar), high density, fine grain and delicate, easy to process, and now many guitar makers prefer wood (easy to process). ...). On behalf of the brand: Greg.Smallman, Kenny.Hill, Takamine, King of Recording.
- Q:Teach you how to determine the merits of wardrobe sheet
- First, look at whether the substrate material to achieve environmental protection. As long as the content of free formaldehyde in the plate ≤ 9mg / 100g that the European E1-class environmental standards, no harm to human health. The most direct way is to open the door, opened the pumping session, if there is a strong stimulating smell, and even people tears, indicating that formaldehyde content exceeded; Second, look at the business of materials testing certificate to see whether it holds the relevant national wood-based panel quality Inspection certificate of inspection center.
- Q:Furniture board specifications four eight feet What is the meaning of that: 4 * 8
- Consistent with the specifications of stainless steel plate,
4 * 8 four eight feet that is 1219mm * 2438mm
It is 1 meter 22 * 2m 44
- Q:Daren detailed explanation VCM color plate and PCM color plate difference, for the refrigerator panel
- VCM board for the film, PCM for the color coated board, the general VCM board with galvanized substrate, covered with color or pattern film, the surface of such a plate is very smooth, the surface color effect is PCM can not be achieved, but the price More expensive, generally used in the refrigerator panel, or high-end wine cabinet side panels, set-top box shell, product use for the membrane requirements have a relatively high demand. PCM is a color pre-coated sheet, the surface for home appliances environmental protection paint, the price is relatively cheap compared to PCM, generally used in the refrigerator side panels, this plate is not suitable for high-grade refrigerator panel, due to the flatness of the plate than VCM difference and color The effect is single, so the main use of the side panels.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range