Q:What is the difference between coke and semi coke in ferrosilicon smelting process? In the process of energy statistics in the end should be 0.9714 of the conversion coefficient should be used with the conversion coefficient of 0.75 x 0.9714, please expert advice? emergencyUrgent!

The difference between them is that the final temperature of the two, the use of different raw materials, product yield and product properties are not the same. Low temperature coke. Under the condition that the coal is isolated from the air, the product is heated to 500 to 600 DEG C to obtain the product. It uses the raw coal is lignite, metamorphic degree of coal, long flame coal and gas coal. The final purpose of the low temperature carbonization is to obtain high yield coal tar

Q:How long should it be to store coke in the open air

So, in addition to avoid rain and direct sunlight, ventilation is.Coal and coke stored in an airless environment, a large degree of risk. The temperature is too high or spontaneous combustion has been easy to stuffy.

Q:How much coke can a ton of coal

The ratio is about 1 to 0.7, that is to say, 1 kilograms of about 0.7 kg coke coking coal coke, coke did not reach 0.75 kg, 0.71.Don't listen to them char 1.4:1, personal feeling.

Q:Various types of coal coke are the main test items

If you need to test coal, caking index (G value), glial layer (X, Y) and other indicators, the index also includes the detection of more coal ash melting point (ash melting), hydrocarbon, the Hardgrove grindability index of coal, burning, swelling, activity, Oaxaca coal coal. Slag index.

Q:Said the details can add points ah

Both are expressed in terms of the crushing strength of the cold mechanical strength index of coke quality.Among them, because of the specific measurement methods are not the same, so the use of different records.

Q:Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between

The concept of coke:Bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). By high temperature coking coke for blast furnace smelting, casting and gas generated in the process of coking. After the recovery and after the purification of coke oven gas is not only a high calorific value of fuel, and is an important raw material for organic synthesis industry. Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% were used for blast furnace ironmaking blast furnace coke, so often referred to as metallurgical coke is coke. The special cupola molten iron and coke. Coke is the main fuel cupola molten iron. It is melting charge and molten steel overheating, the support column to maintain its good permeability. Therefore, coke should be Preparation of large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.

Q:What are the companies that produce coke

Too many enterprises to produce coke. You search on Baidu, coke, a lot of business

Q:What is the use of coke

The physical properties of the coke coke coke screening composition, physical properties including bulk density, coke coke coke true relative density, apparent relative density and porosity of coke, coke, coke, thermal conductivity and specific heat of coke thermal stress, ignition temperature of coke, coke, coke thermal expansion coefficient of shrinkage, resistivity and permeability of coke coke. The physical properties of coke are closely related to its mechanical strength, thermal strength and chemical properties at room temperature. Following the main physical properties of coke: true density is 1.8-1.95g/cm3 0.88-1.08g/ cm3; apparent density; porosity is 35-55%; bulk density is 400-500kg/ m3; the average heat capacity is 0.808kj/ (KGK) (100 C), 1.465kj/ (KGK) (1000 DEG C); the thermal conductivity is 2.64kj/ (MHK) (room temperature), 6.91kg/ (MHK) (900 DEG C); ignition temperature (air) is 450-650 DEG C; dry ash free calorific value is 30-32KJ/g;

Q:The coke is divided into several separate uses

Gasification coke is used for the production of coke gas. The utility model is mainly used in a fixed bed coal gas producer with solid slag discharging, and is used as a gasification raw material to produce CO and H2 as combustible components. The main reaction of gasification process:C+O2 - CO2+408177KJ

Q:Why in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produceWhy in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produce

The role of coke in the blast furnace: 1 reducing agent 2 heating agent 3 skeleton role. Combined with the effect of coke in the blast furnace can know compared with coke instead of charcoal. The coke oven gas is produced high calorific value of fuel, and is an important raw material for organic synthesis industry.