Coke breeze of 0-5mm

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 m.t.
Supply Capability:
100000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of Metallurgical Coke of Coke breeze of 0-5mm  Description:

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

Coking coal prices trend
In the first quarter of 2011 international coking coal contract price basic tone.According to media reports, steel mills have agreed to accept Australia BHP will in the first quarter of 2011 coking coal contract price by 8%, the next three months the international coking coal price will be back in the third quarter of 2010 the price high of $225 / ton.This increases with the first quarter of 2011 iron ore price increases of 7.6% basic similar.

2. Main Features of the Metallurgical Coke of Coke breeze of 0-5mm :

• Quality assurance

• Mutual benefit

• Preferential price

• Various choice

3. Metallurgical Coke of Coke breeze of 0-5mm  Images:

 

Coke breeze of 0-5mm

Coke breeze of 0-5mm

Coke breeze of 0-5mm


4. Metallurgical Coke of Coke breeze of 0-5mm  Specification:

 

Parameters

Guarantee

Rejection

Total Moisture (As received basis)

5% max


Ash (dry basis)

12.5% max

13.5%

Volatile Matter (dry basis)

1.5% max

> 1.8%

Sulphur (dry basis)

0.65% max

> 0.75%

Phosphorus (dry basis)

0.035% max

> 0.045%

M10

7% max

9%

M40

84% min

82%

CSR

65% min

63%

CRI

25% max

27%

Size 30-90 mm 

90% min


+90 mm

5% max

8%

-30mm

5% max

8%


5. FAQ

Fixed carbon around 65 coal coke: {civilian coke, casting parts, annealing, chemical coke}

Fixed carbon around 78 coal coke: {casting parts annealing, civilian coke, chemical coke, copper, aluminum, plastic}


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Effect of coke powder ratio on the index
2, the phosphorus content of coke: iron metallurgical coke content should be 0.02 - 0.03%.3, coke ash: blast furnace coke ash effect is very significant. The amount of coke ash in coke increased by 1%, an increase of 2 - 2.5%., therefore, a decrease in coke ash is necessary4, coke volatile: according to the coke can be judged by the volatile content of volatile volatile is greater than 1.5%, then the coke; volatile less than 0.5 - 0.7%, which means that too much, generally mature volatile metallurgical coke to about 1%.5, coke moisture: moisture fluctuations should not be measured in coke, causing fluctuations in the furnace conditions. In addition, increased M04 coke moisture content high, low M10, the drum index error
Q:Ca3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O), phosphorus, phosphoric acid and CH3OH, the comprehensive utilization of raw materials in the following process
(1) according to the definition of replacement reaction, there are two kinds of compounds in the reaction of II, contains two kinds of compounds in the product, so it is not the replacement reaction of reactants, IV no elemental, so it is not a replacement reaction, V reaction is a chemical reaction, I and III reaction with replacement reaction conditions, so is the replacement reaction,
Q:What are the requirements for the quality of coke in blast furnace smelting
Evaluation of coke quality1, sulfur content in coke: sulfur is a harmful impurity of iron smelting, which reduce the quality of pig iron. The sulfur content in the pig iron is more than 0.07%. 11% of the sulfur from the blast furnace charge into the furnace comes from the ore, and the other comes from the limestone; the other is from the coke, so the coke is the main source of sulfur in the charge of the 82.5% of the charge. Sulfur content in coke directly affects the production of blast furnace. When the sulfur content in coke is greater than 1.6%, sulfur increased 0.1%, the amount of coke increased 1.8%, limestone amount increased 3.7%, 0.3% increase in amount of ore blast furnace output to reduce the sulfur content under 1.5 - 2.0%. metallurgical coke is not greater than 1%, the use of large and medium-sized metallurgical coke content in blast furnace is less than 0.4 - 0.7%.2, the phosphorus in the coke: iron metallurgical coke coke content should be in the following 0.02 - 0.03%.3, the ash content of coke: Coke Ash on the impact of the blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%, therefore, the reduction of coke ash is very necessary.
Q:Coke and coal is one thing
Coke is bituminous coal under the condition of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages of the final coke, this process is called high temperature coking (high temperature carbonization).Coke is a deep processing of coal products.
Q:How much sulfur content of Coke will affect the casting process of nodular cast iron
If the control is not good, the manganese content in the molten iron can be increased by increasing the reagent
Q:Coke is divided into several kinds of specifications ah
Three: 1 2 3 coke metallurgical coke of high sulfur cokeCoke is in coal under the condition of air isolation, heating to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage is made, the process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis. Coke is mainly used in blast furnace ironmaking and smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury and so on.
Q:The specifications for coke used in stainless steel smelting are as follows
Metallurgical coke indicators are as follows:A metallurgical coke: fixed carbon, 86%; calorific value 7300cal/kg; ash < 12%; volatile < 1.9%; all 5% "0.6%" water; sulfur;
Q:Who can talk about the coke industry prospects?
Steelmaking is definitely not coke, but now most of the very mature iron making technology needs coke, the future direction of development of iron is not used or less coke
Q:The total amount of heat released by the fully burnt 200g coke is 60% by the mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)
(1) the amount of heat released from complete combustion of coke:Q put =mq=0.2kg * 3 * 107J/kg=6 * 106J.Heat absorbed by water:Q =Q * 106J suction ETA =6 * 60%=3.6 * 106J;(2) Q =cm t suction dreams,Dry water temperatures:Delta t=Q ceilingC water m water=3.6 x 106J4.2 x 103J/ (kg * c) * 10kgC = 85.7,
Q:Coke in the steelmaking process in the end is what
3) skeleton: smelting process in blast furnace is gas rise and decline occurred in the opposite charge of movement and interaction, the core permeability is the key operation of blast furnace. In the upper column, gas flow distribution of coke layer; in the middle of the column material, the coke from the skeleton effect, support has been melting the iron ore, the normal gas rise; in the lower column, high temperature in the solid massive existing coke and has become liquid hot metal and slag mixed together, become loose skeleton gas rising and falling iron and slag.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range