Q:What is the difference between coking coal and coke

Therefore, coke is not coking coal, coking coal is one of the products after processing

Q:Natural gas can replace coke smelting pig iron

No, because the coke in the blast furnace to heat, reducing agent, skeleton and carbon supply four functions

Q:Coke can be used to do what carbon black can be used to do?

1 coke is used to restore the iron ore, coal through pressure, isolated air and high temperature dry distillation, and the by-product of coal gas and coal tar is an important chemical products;

Q:The sulfur content of coal and coke in general, the coking process of sulfur content of coal into the output of sulfur content of coke compared to those who are high and low?

80% to 90% of the sulfur in coal into coke, the other into the coke oven gas.

Q:Coke in the whole process of steelmaking in the end is what to do, just to provide heat or carbon and other substances into steel or iron?In the study of coal classification inside, one is divided into coking coal, coking coal and coke as main, and then you see is steel or iron coke must material. What is not clear. In the end, out of coal mining is mainly used to burn energy extraction, or said that coal like oil can be converted into other products, which is a coke can convert?

It is necessary to add coke, pellet, sinter ore, ore and other materials into the blast furnace in a certain proportion, batch and sequence, and then to produce molten iron in the reducing atmosphere of the blast furnaceAfter the hot metal to steel in converter against the general converter, scrap also need to add a certain amount of used to balance the heat. Hot metal and scrap are added to the converter after the oxygen lance for oxygen operation, the oxidation of oxygen to carbon in liquid iron, silicon, manganese, phosphorus, sulfur and some non-metallic inclusions to form steel. Adding lime, dolomite, iron oxide and mine slag and coolant is needed in oxygen at the same time. After the completion of steel smelting in the tapping process according to different requirements with the corresponding iron alloy steel, after also refining process.

Q:What is the difference between coke and carbon residue? Coke is a high-temperature refining, carbon residue can be used for civilian fuel it?

Types of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.1, metallurgical coke, metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% are used in blast furnace, the furnace coke often called metallurgical coke.The metallurgical coke quality standard (GB/T1996-94) made in China is the quality standard of blast furnace

Q:Effect of coal fineness on coke

In coking, the caking property is not good and the coke quality is reduced. Therefore, from the perspective of the uniformity of coal, coal fineness of some good. From the operation point of view, the greater the fineness of coal coal bulk density is lower, the production capacity of coke oven is low, into the coke oven, fine coal powder easily by gas is brought out, and easy blockage of ascending pipe, gas collector, affect the normal production of the coke oven, and the set of tar in the trachea increased, the effect of recovery operation. Therefore, from the production point of view, the fineness of coal should not be too large. Bulk coal in the top of the coke oven, coal crushing fineness of the general control in less than 3mm component in the range of 73~83%. Tamping coking, generally about 90%. In this range, the fineness of pulverized coal can meet the requirements of coke quality and coke oven operation. The small coal crushing will reduce the adhesion and the bulk density of coal, so as to reduce the coke quality.

Q:What are the criteria for coke classification and how to distinguish between primary and two grade coke?

4, coke in volatile coke: according to the volatile content of coke can determine maturity. Such as volatile than 1.5%, said coke; volatile matter less than 0.5 - 0.7%, said too much, generally mature metallurgical coke volatile is about 1%.5, the moisture in the coke: water fluctuation will make coke measurement is not allowed, thus causing the furnace condition fluctuation. In addition, coke moisture will increase the M04 high, M10 low, to the drum index error6, coke screening composition: grain size of coke in blast furnace smelting. It is very important to China in the past, coke size requirements: on the coke oven (1300 - 2000 square meters) of coke particle size greater than 40 mm; medium and small blast furnace coke particle size greater than 25 mm. But some mills tests show that the coke 40 - 25 mm in size as well. More than 80 mm coke to whole, little change in its size range. So the coke size uniform, large gap, small resistance, the furnace is running well.

Q:China's coke iron smelting began in what time?

In the early period of the Warring States period, China has mastered the technology of decarbonization and heat treatment. The late Warring States period, but also invented a reusable "Iron Fan" (made of iron casting metal utensils of the hollow device). The Western Han Dynasty, appeared the crucible process. At the same time, the further expansion of the scale of shaft furnace. In 1975, in the vicinity of Zhengzhou guxing town discovered and unearthed Han iron smelting sites, site area of 120 thousand m2, two parallel excavated foundation of blast furnace, blast furnace volume of about 50m3

Q:What is the density of coke?

The true density of coke: 1.8 ~ 1.95kg/cm3; apparent density: 0.8 ~ 1.08kg/cm3; pile density: 400 ~ 500kg/cm3