Q:How do you design the placement point of the thimble in EMX4.1? I add in the product picture, how can tune into the thimble, say what point is not available, the Qing master teach. Thank you

After you have finished the mold, you can make the reference points in the reference parts or in the position you want. After you come into the mould base, you can define the thimble to be automatically selected. 4 I did, but 5 seems impossible. I'm looking for a way right now!

Q:The mould is used for transformer skeleton, pin needle used in mould and some small, I have seen a small circular needle 0.5mm; there are square or flat, is also very small, only 0.3 x 0.7mm. The accuracy of these needles is very strict, and the tolerance is only 0.002mm. Take the round needle as an example, 0.5mm needle, needle body diameter 0.8mm, needle diameter 1.2mm, 0.8mm and 1.2...

I suggest you buy directly, need to make very precise needle matching instrument, non general machinery can be made, also in the process of product processing, do not take the release agent, it is easy to break the spell of needle, needle often change, you have to do without dismantling the case of mold, you can change the needle. Go buy it, do not suffer

Q:What is a thimble?

When using manual needle sewing, some cloth is too thick, the cover on a surface of a dent metal needle penetration force to help things in the right hand in

Q:Air conditioning fluoride nozzle, thimble leakage fluoride how to deal with, thimble can be unloaded?

You can change it, first lock the snow species, then screw it out to replace the valve thimble

Q:Die die flat thimble old break, how's going on?

Material does not work, often to brush oil, fuzzy surface should be blown clean, not to have aluminum chips

Q:Die casting die thimble often broken, who knows what a good way to solve it?

It should be with the product, the broken needle top shows too much resistance, no deformation strain check beer pieces where appropriate to improve the model, our factory had tens of thousands of sets of die, not many often broken needles.

Q:The Apple phone's thimble is not available. Can you open it??

Yes. As long as you have something sharp. Even a toothpick will do

Q:With UG out mold drawings, thimble, cylinder and other standard parts, how do you express ah, there is no appearance like CAD ah?

If the company does not have separate development plug-in, it will install a HB plug-in, which 2D modules have a variety of standard parts of the symbol.

Q:When using dry high temperature resistant thimble lubricating oil, will the surface of injection products still have oil?

Our company has sales of Japan mountain chemical SP dry thimble lubricant, will not produce any oil pollution, if you need to consult, please feel free to contact us at Dongguan mountain a lubricant Co., Ltd. (Baidu)

Q:Injection molding machine after opening the thimble, the top is not moving, the top of the solenoid valve, the ejection point after the lubricant, the top out of normal, work a few minutes later, and must also be sprayed, this is the point of trouble

On the above, answer the professional point, okay? It says spraying on the mold. This is because the thimble is jammed and has nothing to do with the molding machine. I give you advice: 1: check the installation of a few top rod, installed less or the location is wrong, there will be a top out, or stuck. 2. check the thimble for carbon or rust. 3. check that the ejection is under pressure.