Detailed Product Description
woodworking cnc engraving
Drive motors servo
Spindle speed 24000rpm/Min
System Resolution 0.002mm
woodworking cnc engraving
1. Structural stability: cast steer structure makes our pouters more stable.
2.Italy HSD spindle motor.And the spindle bearings for high-precision ceramic bearings, low noise, long life.
3.Modularize frame design: Select and add a variety of machining spindle configuration, can be sculpture, engraving, milling work.
4.Easy operation: A simple and secure mode of operation, advanced document pre-processing function to ensure the speed and accuracy of operation
5.Automatic tool changing system like bamboo leaf hats, knife storage capacity 8 (Optional)
6.Vacuum table and the dust extraction system with 6 zines seperately control,oil free vacuum pump,dust extraxtion hord ,the displacement of up to 230 stere per hour
7.Compatible software: Open style software interface, it is compatible with
type3/Arteam/Castmate / Wentai and many other kinds of CAD / CAM software can change the working file into G code ,guarantee that the design of barrier-free.
X-Y-Z axis Working area
X-Y axis movement
Rack and pinion ,Linear orbit.
Ball screw drive/Germany
Vacuum System(option:T-slot and Vacuum Table
Liner30 square /Taiwan
Max cutting speed
Repeat positioning accuracy
Spindle rotating speed
Feed in height
Italy HSD 8kw/(air cooling)
ISO30-12.7mm , 6mm, 3.175mm
Type 3 software/France Ucancam software(Option:Artcam software)
Temperature:0 degree~45 degree
HPGL,G code ,U00,mmg.plt
SYNTEC EMBED-CNC control system
Servo motors and drivers/Japan(Option:Yaskawa servo,Panasonic servo)
vacuum hold down
oil lubrication system
clamps and vacuum fitting
- Q:How can the thimble and the pin hole cooperate in the mold?
- General holes should be large, 3 filaments small, 3 filaments or so
- Q:What is the thimble of machine tool parts?
- It is the pivot of the axis of rotation. In general lathe grinder head or tail tail sit sit.
- Q:How can the injection machine neutron and thimble move at the same time?
- Don't do this, otherwise you smoked heart side ejection mold are ruined
- Q:Injection molding machine mold thimble on the oil injection, the product also has a bit of anti rust agent, release agent, which kind of gasoline can be cleaned, the mold does not dismantle
- The mold is much more porous at the time of maintenance. Recommendation: put the thimble properly, a few more, the mold cleaning agent sprayed on cotton or wipe cotton top, wipe the thimble, continuous top ten times wipe, wipe more times, the effect will be better. The direct injection of the thimble causes the oil in the thimble to become thin and does not grow well for a long time. This problem is a headache, the supply is more anxious, always with dirty oil. If the mold can be removed, the most convenient way to directly remove the mold, after cleaning less oil. For reference only.
- Q:How is a lathe pin mounted on a lathe?
- The top insert thetailstock spindle taper hole standard rod end top end at the other end of the top end of the tailstock dial indicator is fixed on a middle carriage in the spindleContact with the standard gauge rod sliding carriage to adjust the headstock tailstock after adjustment can ensure the machining precision of coaxiality etc.
- Q:Plastic mold bite surface, thimble printing reasons, specifically how to deal with?
- 1. The bite flower is usually on the female die surface and the thimble is in the male mold face. If there is a trace, it is necessary to reinforce the corresponding place.2, plastic mold, a kind of plastic molding, extrusion, injection, blow molding and low foaming molding of a combination of plastic mold short.3, such as die with variable cavity composed of concave mould substrate, die components and die combination board, die with variable core is composed of a convex mold substrate, punch assembly, punch card, combination cavity blocking assembly and side cutting plate. The coordinated change of die, punch, die and auxiliary forming system. Can be processed in different shapes, different sizes of series of plastic parts.
- Q:The mold tube thimble can not return to the designated position, the left and right sides have what is going on!
- When is the top, our can too force the Boss into the top. Enhanced polishing and increased ejector ejector pin. I hope I can help you.
- Q:Plastic mould structure, what is the plate between the B plate and the thimble plate?
- The panel you mentioned was designed for ease of release and design of the product. Between the B board and the board, there will be springs and other automatic pop-up mechanism. When the mold opens, it will automatically bounce and complete a part of the mold release. After that, the ejector plate is pushed out to complete the whole process of demoulding. Hope to be of help to you.
- Q:Die thimble ejector can not be restored, how to solve?
- Thimble plate bending, put it down.
- Q:Injection white products, mold thimble dirty prints, how to clean?
- I was the wind to blow also ran out of the thimble, thimble said top out the longest limit, take the water that day to wipe the thimble. Not really, then use the mold cleaning agent to spray the thimble gap, and take the pipe blow at the same time!
Our products are widely applied in the wood engraving,mould making and drilling and non-metal engraving fields.
Our company covers an area of 2,000 m2 with 15 assembling lines,and has more than 30 experienced workers,well trained R&D and after-sales staffs.Each year,1000 sets of machines and excellent service are provided for different demands.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range