CNBM Nut Coke with Low Phosphorous

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of Nut   Coke   with   Low   Phosphorous Description

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.

Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.

2. Main Features of the Nut   Coke   with   Low   Phosphorous

     Quality assurance

     Mutual benefit

     Preferential price

     Various choice

3. Nut   Coke   with   Low   Phosphorous Images:

 

CNBM     Nut      Coke      with      Low   Phosphorous

CNBM     Nut      Coke      with      Low   Phosphorous

CNBM     Nut      Coke      with      Low   Phosphorous

CNBM     Nut      Coke      with      Low   Phosphorous


4. Nut   Coke   with   Low   Phosphorous Specification:

 

Parameters

Guarantee

Rejection

Total Moisture ( As received basis )

8% max


Ash ( dry basis )

12.5% max

> 13.5%

Volatile   Matter ( dry   basis )

1.5% max

> 1.8%

Sulphur ( dry basis )

0.70% max

> 0.80%

Phosphorus ( dry basis )

0.020% max

> 0.025%

Size 10-30 mm

90% min


+30 mm

5% max

> 8%

-10 mm

5% max

>8%


5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1) How to guarantee the quality of the products

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

2) What are coke's main physical properties?

The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)

Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);

Ignition temperature (air) is 450-650 ℃.

3) How about your company

Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
Q:Who knows what the provisions of the coke train sampling country?
Test procedureDetermination of total moistureA, said the samples size less than 13mm with pre dried and weighed for about 500g (referred to 1g), smooth specimen,B, a sample tray is placed on the 170 a 180 C in the drying box, LH removed after cooling, weighing 5min. C, check dryness, each time 10min, until the two consecutive quality difference in LG, calculate the quality of the last time.Determination of moisture content of samplesA, with the weighing bottle drying to constant quality in advance and has quickly called weighing samples size less than 0.2mm uniform mixing of the 1 + 0.05g (referred to 0.0002g), flat on the weighing bottle.B, will be filled with a sample of the bottle to be placed in the 105-110 drying box drying 1H, remove the weighing bottle immediately covered with lid, put into the dryer to cool to room temperature (about 20min), weighing.C, check of dry, insult 15min, until two consecutive poor quality in 0.001g, take the quality of the last calculation, if quality is weight gain first calculated on the basis of.Five, the calculation of test resultsCalculation of total moisture content according to formula (L):
Q:What kind of coke is used for steelmaking? The difference between metallurgical coke and foundry coke.
Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough
Q:Standard grade two grade coke standard
2, the phosphorus in the coke: iron metallurgical coke coke content should be in the following 0.02 - 0.03%.3, the ash content of coke: Coke Ash on the impact of the blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%, therefore, the reduction of coke ash is very necessary.4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.
Q:What are the indicators of first grade coke and the two grade coke?
Two level 12.01-13.50 0.61-0.80 not less than 76 not greater than 9 not greater than 1.9Three level 13.51-15.00 0.81-1.00 not less than 72 not greater than 10 not greater than 1.9
Q:What does Coke test index M25 mean?
The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke. Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance
Q:Coke belongs to the coal industry
Classification and code (2002 Edition) code 25 petroleum processing, coking and nuclear fuel processing industry classification and code (2002 Edition) A agriculture, forest, animal husbandry and fishery 23 printing and record medium reproduction 4900 building decoration 01 24 agricultural stationery and sporting goods manufacturing 50 other building 02 forestry 25 oil processing and coking and nuclear fuel processing F transportation
Q:What is the difference between coking coal and coke
Coking coal is the raw material for producing cokeCoking coal is produced by carbonization: coal gas (carbon monoxide), coal tar, coke
Q:Coke boiler belongs to coal-fired boiler
In addition, the utility model is characterized in that the utility model is used for heating and catering industry. Generally speaking, coke boiler belongs to coal fired boiler. Reason is that coke is a coal and fat coal for coke production.
Q:The difference between coke and coal
Coke is a product of wood processing, not the same

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range