CNBM Brand Polycrystalline Solar Panels Made in China

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 pallet
Supply Capability:
10000000 pallet/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:



CNBM Brand Polycrystalline Solar Panels Made in China

CNBM Brand Polycrystalline Solar Panels Made in China

Description:CNBM Brand Polycrystalline Solar Panels Made in China


Characteristics:

I.Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.
II.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.
III.EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
IV.AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.
V.Junction box: Multi function junction box with water proof.
VI.Long lifetime:
25 years; Less power decrease.
VII.Good performance of preventing from atrocious weather such as wind and hails.
VIII.Resisting moisture and etching effectively, not effected by geology.
IX.The certificate issued by international authority: UL, TUV, IEC, VDE, CE.
 

Quality and Safety

1. Rigorous quality control meets the highest international standards.

2. High-transmissivity low-iron tempered glass, strong aluminium frame.

3. Using UV-resistant silicon.

4. IS09001/14001/CE/TUV/UL  

Warranties

1. 10 years limited product warranty

2. 15 years at 90% of the minimal rated power output

3. 25 years at 80% of the minimal rated power output

Technical date :

ITEM NO.:

Poly 156*156 cell ,60pcs . Power range from   230Wp-260Wp

Maximum Power(W)

230

235

240

245

250

255

260

Optimum Power Voltage(Vmp)

29.4

29.5

29.7

30.1

30.3

30.5

30.7

Optimum Operatige Current(Imp)

7.83

7.97

8.08

8.14

8.25

8.37

8.48

Open Circuit Voltage(Voc)

36.7

36.8

36.9

37.1

37.3

37.5

37.7

Short Circuit Current(Isc)

8.52

8.59

8.62

8.65

8.69

8.73

8.78

Solar Cell:

156*156 Poly

Number of Cell(pcs)

6*10

Brand Name of Solar Cells

Polycrystalline Cell

Size of Module(mm)

1650*992*40/45/50

Cable & Connector Type

Pass the TUV Certificate

Frame(Material Corners,etc.)

Aluminium-alloy

Back sheet

TPT

Weight Per Piece(KG)

19.5KG

FF (%)

70-76%

Junction Box Type

Pass the TUV Certificate

Tolerance Wattage(e.g.+/-5%)

±3%, or 0-3%

Front Glass Thickness(mm)

3.2

Temperature Coefficients of Isc(%)

+0.04

Temperature Coefficients of Voc(%)

-0.38

Temperature Coefficients of Pm(%)

-0.47

Temperature Coefficients of Im(%)

+0.04

Temperature Coefficients of Vm(%)

-0.38

Temperature Range

-40°C to +85°C

Surface Maximum Load Capacity

5400Pa

Allowable Hail Load

23m/s ,7.53g

Bypass Diode Rating(A)

12

Warranty

90% of 10 years, 80% of 25 years.

Standard Test Conditions

AM1.5   1000W/ 25 +/-2°C

Packing

carton or pallet

1*20'

14 Pallets / 316pcs

1*40'STD

25 Pallets / 700pcs

 

CNBM Brand Polycrystalline Solar Panels Made in China

CNBM Brand Polycrystalline Solar Panels Made in China

FAQ

I..Will you focus on the safety of the goods during transportation?

Yes, Safety of the cargo is the primary element that we would consider on transportation.

II..How would guarantee the quality will meet the requirements of your clients?

Before shipment, we will have inspection for each batch of goods.

III..What certificates do you have?

IEC,UL,TUV,CSA,etc.

IV..Can you do OEM according to clients’ requirements?

Yes, we have our own brand while we can provide OEM service.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Which is Better: DIY Solar Panel vs commercial grade solar panel?
On my website you can read my story of how my dad made solar panels at home and now he pays nothing to the electric company.
Q:It's all about Solar Panels?
Solar okorder.com/ And thin film solar panel power stations are about 50-60% cheaper now than solar power was in 2000. But they're still not economic in most places. Mike K's claim that solar panels produce more pollution than 'traditional' power is wrong. Coal is over 900g CO2/kWh, plus loads of pollution. Gas is ~400g CO2/kWh.
Q:someone knows about solar panel?
A Mobile home will have its frame grounded when connected to a standard electrical 'plug-in', if it was built to current Codes. If you plan to use that panel as the entire electrical system you'll need to ground the frame. Vehicle systems, (frame grounded), are 2 Volt for a reason. It would be unwise to use a separately derived 20V. system in that mobile home if that frame's not grounded. (That first step out on to the ground could be a 'lulu'.)
Q:know about solar panels?
Solar panel refers to a panel designed to absorb the sun's rays as a source of energy for generating electricity or heating.A photovoltaic (in short PV) module is a packaged, connected assembly of typically 6×0 solar cells. Solar Photovoltaic panels constitute the solar array of a photovoltaic system that generates and supplies solar electricity in commercial and residential applications.
Q:Im a bit confused about what a solar panel is?
Solar panels are arrays of individual solar cells connected in series and parallel, and.. A high quality, monocrystalline silicon solar cell, at 25 °C cell temperature, may produce 0.60 volts open-circuit (Voc). The cell temperature in full sunlight, even with 25 °C air temperature, will probably be close to 45 °C, reducing the open-circuit voltage to 0.55 volts per cell. The voltage drops modestly, with this type of cell, until the short-circuit current is approached (Isc).
Q:Is using a thick cardboard backing for a solar panel ok?
Build okorder.com/
Q:how do solar photovoltaic panels work?
Hey E Girl, photovoltiac panels are pretty simple. They start with a solid block of silicone, and shave thin layers off of them, called wafers. Once you have about 72 of them, you take half of them and dope them with boron, then the other half are doped with phosphorous. Once that's done, they take one each phosphorous and boron wafer, and glue them together with a special conductive epoxy glue, and attach a wire to each wafer. When the two glued wafers are exposed to the sun, a reaction occurs that forces free electrons from the silicone particles from one wafer onto the other, and a voltage is generated between them, about /2 volt to be exact. Once all 36 pairs are glued together, they are wired in series, connecting the phosphourous wafer from one to the boron wafer on the next, and so on. If you start with 72 wafers, you'll have 36 pairs glued together when you are done. At /2 volt each, that makes a 8 volt panel, which is used to charge a 2 volt battery. The charging source always has to have a few more volts than the battery. These 36 pairs of cells are then arranged on some kind of back board, glued down, covered with acrylic glass and mounted in a frame. There are some great websites you can go to for more info, I will list some below. Did you know that there are over 00,000 homes and businesses in the US alone that use some level of solar power to operate their electrical systems? That's good news. We actually live in one of those homes, it is powered by both the wind and sun and heated with solar and wood. I hope this answers your question, good luck, and take care, Rudydoo
Q:how to built solar panel?
Building a good solar panel can take you up to a week. To make a solar panel you will need detailed guide including schemes and so on.... There are many guides at the net, but they're not free so you'll have to invest some cash. Typically such guide might cost at about $40 - $90 One of the best is Earth4energy: If you are interested you can read detailed review of this product here:
Q:Solar Panel Question...?
The best way to find out is to determine the wattage of each piece of equipment you want to use and how many hours you want to use those pieces of equipment. Finally, calculate the total number of Watt-Hours you need at minimum. Then you need to research solar panels or mobile wind mills (they need to be pretty huge to get a decent amount of energy I think, so solar power is probably the way to go). You will need to figure out the efficiency of the solar panels, the size of the array, how you will turn it or if you will turn it at all (to face the sun to get the maximum energy input, or maybe to use mirrors so you don't have to turn it. Once you find a good configuration for your mobile kitchen, you need to calculate if the Watt-Hours you will generate on an average day (with average weather) is enough to power the equipment whose energy requirements you previously calculated. Then you have to keep in mind that some days will have no sun, and you may not be working on some days, but you can still capture sunlight. For each case, a large battery array will be required. If you had a guage on that array, you could also hook it up to the a small generator in case you need immediate power. It's an eco-friendly process, but the initial cost is high and it requires a lot of research and planning. This is why most people do not do it--not because they don't want free energy from the sun, but because it's not easy to start collecting that energy in an efficient way. Sorry I couldn't give you more specific numbers, but a solar panel sales agency should be able to estimate whether or not you could do it (they'd probably set it all up for you too). ^_^
Q:Should I buy solar panels?
Without doing any calculations, I would assume that paying down debt would be a better use of your money. Solar panels are only going to get less expensive and more efficient with time so waiting before you invest in solar panels is a good idea. Of course, to properly evaluate the prospects of going solar, you should consider the tax credits available in your state and the promotional value to your business.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range