Quick Details of Chair Mechanism G013A:
Type: Chair Mechanism Place of Origin: Guangdong China (Mainland) Material: aluminum Color: black
Specifications of Chair Mechanism G013A:
1. Synchronized tilt, Height adjustment and spring tension adjustment.
2.Five positions lock with anti-kickback safety feature.
3. Seat travel range: 0.5~10°, back starting angle0 ° with tilting range 20°
4. BIFMA and EN1335 certified.
Synchronized Chair Mechanism
Packaging & Delivery:
Packaging Detail: Wooden box: 1120*1120*1100 with pallets 72pcs
Delivery Detail: 15-25days
- Q:What kind of materials are used in the telescopic equipment of machinery industry?
- The most common form of bond failure is shear. So the key requires enough strength and steel. No. 45 is the most commonly used steel.
- Q:What are tensile and shrink wrapping?
- Shrink wrap (shrink wrap) is the use of shrink film wrapped items (or inner package), and then the film proper heating treatment, so that the film shrink and cling to the goods (or inner package) packaging technology. Shrink film is a specially stretching and cooling treatment of polyethylene film, because the film residual tensile stress in the directional contraction, the stress is heat will be eliminated, so that the horizontal and vertical were sharp contraction, while the film thickness increases, the shrinkage rate is usually 30% to 70%. The contraction force reaches the maximum value at the cooling stage, and can keep for a long time.
- Q:What is a limiter?
- To understand what a limiter is, you should first know what a telescoping device is The expansion device is also called expansion joint, expansion joint, compensator and expansion joint. Expansion device capable of axial expansion in a certain range, the offset can overcome different axial pipe butt within a certain angle and produce, installation and convenient disassembly pipeline valve greatly, in the pipeline to allow expansion in free expansion, once over its largest expansion amount rise to limit, to ensure the safe operation of pipeline the
- Q:Mechanical principle of belt expansion machine
- Conveyor sections: two, three, four. Width of conveyor belt: 500, 600, 700, 800, 1000, 1200mm. Belt conveyor speed can be selected: constant or variable speed. Belt conveyor direction can be selected: one-way or two-way conveying materials. Belt conveyor angle can be selected: horizontal, fixed angle or automatic lifting. The fixed section of the conveyor can be fixed or fixed. Conveying speed: <30 M / min.. Conveyor capacity: <70 kg / m..
- Q:Is the construction of the water supply steel pipe a telescopic device?
- The trench excavation method should be carried out before the investigation and study, fully understand the channel section of the soil, underground water, underground structures, underground trench near building and construction environment, find the problem timely contact with the construction unit, research on treatment measures. In order to prevent over excavation, the groove should be laid out before excavation, and the excavated layer shall be excavated at intervals according to the opening slope, and the excavation depth shall be measured at any time.
- Q:What is the automatic telescopic function of an automatic umbrella?
- The most important thing about the design of a fully automatic long handled umbrella is the choice of the elastic potential energy device between the upper and lower springs. The traditional semi automatic long handle umbrella pushes the slide block upwards through the pretightening force between the springs between the two sliders so as to realize the opening of the long handle umbrella. Therefore, it is proved by experiments that if a spring is added to the slider, and whether the slider can move downward similarly, the experiment shows that the umbrella can be closed. Then, the following work is how to determine the size difference and working state of the two spring preload.
- Q:How to achieve telescopic power arm
- Pneumatic, cylinder. There is an electromagnetic valve, an air compressor.
- Q:Mechanical structure and principle of automatic focusing lens for camera
- From the basic principle, AF can be divided into two categories: one is based on the camera and photographed location AF target distance between measurement and another is based on the focus screen clear focus imaging detection.
- Q:What are the main uses of a bolt tensioner?
- Stretch, fasten, or loosen the bolts and think of the bolts as a rubber band,
- Q:The working principle of the bolt tensioner
- A bolt tensioner consists of a hydraulic pump, a high pressure hose, a pressure gauge, and a stretched body. The hydraulic pump is the power source, the pressure meter reflects the output pressure of the pump, and the high pressure hose is connected with the hydraulic pump and the drawing body. A drawing body is an actuating element for realizing a bolt stretching. The utility model is mainly composed of a piston cylinder, a piston, a supporting bridge and a stretching nut.
Our company is an office furniture and furniture raw material and fitting research and development, production and sale large enterprise. Our product range has covered all kinds of office chairs and a full set of office chair components, including caster wheels, chair bases, mechanical parts, plastics, seat cushions, armrests, chair backs and high class meshes. Our company provides various kinds of office chair one-station supporting services for customers from all over the world.
1. Manufacturer Overview
|Annual Output Value
||US$ 50 to US$ 100 Million
||10.00% South Asia
10.00% Southern Europe
10.00% Central America
10.00% Western Europe
10.00% Eastern Asia
10.00% Mid East
10.00% Southeast Asia
10.00% Eastern Europe
10.00% South America
10.00% North America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||Shunde, Huangpu, Shenzhen
||31% - 40%
|No.of Employees in Trade Department
||Shezhen, Foshan, Hongkong
||10,000-30,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range