Quick Details for Alumina Ceramic Foam Filter for Steel Industry
|Place of Origin:|
PU foam (polyurethane foam)
10 ppi to 60 ppi
Mend structure of crystalloid
Reduce foreign matter
Stable chemical property
Stable purifying efficiency
|polyurethane foam filter:|
|Packaging Details:||carton and pallet, or as customers' requirement|
|Delivery Detail:||7-15 days after receiving the downpayment|
Alumina ceramic foam filter
1.even aperture, high porosity, proper sinter
2.high strength of anti-flexing and anti-compression
Alumina ceramic foam filter
The product, adopted good portiforium foam and high purity ceramic , effectively removes non-metal solid mixture from aluminium and aluminium alloy fusant.
even aperture, high porosity, proper sinter, high strength of anti-flexing and anti-compression, effective filtering.
It is widely applied to the aluminium fusant filter equipment of continuous casting, half-continuous casting, gravity casting, and low pressure casting.
Ceramic foam filters are different from aperture specifications from 10 to 45ppi, with different sizes and shapes.
Besides the general specification ,we can offer the product according to the customers requirements.
Form A Ceramic foam filter capability
Tortuous intensity in normal temperature
Pressure resistence intensity
in normal temperature
in high temperature
Form B 25ppi capability of typical pouring of ceramic foam filter
Maximum metal volume of pouring
Optimum volume of pouring
Typical capacity of filtering
Welcome to visit our factory~
- Q:What is the reason that ceramic filter does not absorb mineral powder?
- In order to avoid frequent fluctuations in pressure and pressure within a short period of time, a buffer cylinder with a stabilizing effect is provided in the backwash pipe.
- Q:The ultrasonic wave of ceramic filter is not good. What's going on?
- The earliest filtration was mostly gravity filtration, which was followed by pressure filtration to increase the rate of filtration, followed by vacuum filtration. The drum vacuum filter invented in the early twentieth Century realized the continuous operation of the filter. Since then, various types of continuous filters have appeared. Intermittent operating filters (such as plate and frame press filters) are developed for automatic operation, and the filtration area is becoming larger and larger. In order to obtain the filter residue with low moisture content, the mechanical press filter has been developed.
- Q:The working principle of ceramic filter
- The working principle and mechanism and the shape of ceramic filter disk vacuum filter is similar to that in the pressure under the action of suspension by filtration medium, particles are trapped cake is formed at the surface of the medium, and the liquid through a filter medium outflow, reached the purpose of solid-liquid separation. The difference is that the filter medium of ceramic filter plate with microporous capillary effect, the capillary force in the pores is larger than the vacuum force applied to microporous keep full liquid state, no matter under what circumstances, the ceramic filter plate does not allow air through, because there is no air through solid-liquid separation, low energy consumption, vacuum a high degree of.
- Q:Common troubles of ceramic filter
- The metering pump is not working properly and backwash water into the bucket of acid. The main reason is that the metering pump is not switched on, the diaphragm is worn out, the frequency is too low, and the check valve of the acid pipe and backwash pipe is worn out.
- Q:How should the static and dynamic sealing points of the ceramic filter be leaking?
- When the main shaft is rotated, the filter cake is adsorbed on the surface of the ceramic filter plate and dehydrated by the vacuum generated by the vacuum pump.
- Q:Ceramic filter cleaning, sulfuric acid cleaning
- Ceramic filter medium is ceramic, ceramic generally resistant to strong acid, alkali, cleaning, it is best to use nitric acid, hydrochloric acid next, not recommended to use sulfuric acid.
- Q:The vacuum degree of the ceramic filter is normal and the cake water is large
- The concentration, particle size and mud content of the raw materials are not suitable for or due to changes, which are no longer suitable for dehydration using ceramic filters
- Q:The ceramic filter plate is broken. What will happen to the vacuum pump?
- If it is found that the ceramic plate is broken, it should stop in time to replace the broken ceramic plate. Ceramic filter is produced by vacuum suction vacuum pump to the pulp in the water through the ceramic plate away, the surface aperture ceramic plate for several microns, so it can intercept the cake on the ceramic plate on the surface, if the ceramic plate is broken, a hole is a few millimeters, when the vacuum suction pump when they go together along with the pulp pump.
- Q:What are the reasons for the program alarm of ceramic filter?
- If that is the ceramic filter tank body of the slurry concentration is diluted, has nothing to do with the ceramic filter itself, can think of ways to enter the ceramic filter tank before the slurry concentration increased, thereby improving the dewatering efficiency of ceramic filter.
- Q:The vacuum of ceramic filter is not enough
- Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range