Ceramic Fiber Blanket for Fire Insulation

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
500 kg
Supply Capability:
6000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


It is a needled blanket made from our ceramic bulk fiber which can withstand temperature up to 1400C degree(depends on different quality grades). The blanket is lightweight, flexible, and available in a wide variety of thicknesses, widths and densities.


-Insulation and linings for furnaces, kilns, generators, reformers, boilers, etc.

-High-temperature pipe insulation, casting mold insulation, etc.

-High-temperature seals and gaskets, furnace door seals, expansion joint seals and filtration

This product has a range of products:ordinary type,standard form,high-purity type, high-alumina type and containing zirconium type.Different types of products used  different materials.The performance of these products also has difference,and they are suitable for different workong temperatures.The product can be used after optional cutting .When the product storage should be paid attention to moistureproof.The high-alumina type and containing zirconium type products can be directly used as furnace lining .And using high-temperature refractory adhesive when stick.

Al2O3 %47-49
Al2O3+SiO2 %99
ZrO2 %
Fe2O3 %0.2
Na2O+K2O %0.2
Classification temperature °C1260
Working temperature °C1100
Permanent linear change % (128KG/m3)





Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference of ceramic fiber asbestos cloth?
Considering that you compare it with ceramic fiber cloth, your principle usage must be in thermal insulation: There is a variety of glass fiber cloth, including C glass fiber cloth, non-alkali glass fiber cloth, high silica glass cloth, etc. The former two are relatively cheap, but the applicable temperature is no more than 650℃. The last one, high silica glass cloth, cannot be used in the temperature above 950℃. But it is more expensive with uniform appearance and density. If in a higher temperature, ceramic fiber cloth is suggested to be used and the price is reasonable.
Q:What’s the principle of ceramic fiber casing production?
Mainly referring to the traditional textile production process, and by spinning the aluminum silicate refractory fiber into yarn, using the glass fiber or heat-resistant steel wire as reinforced material, adopting special textile technology and equipment, ceramic fiber casing is thus braided. 1. It is a sort of new thermal insulation refractory and inorganic material. It can be permanently used at high temperature of 1000℃. Containing a certain amount of adhesive material, it is usually burned at lower temperature with no effect on its insulating property. It keeps good mechanical strength even after heating. 2. Ceramic fiber casing has the characteristics of light weight, high temperature resistance, thermal insulation, acid and alkali resistance, innocuity, higher tensile strength and good toughness. 3. Compared with glass fiber sleeve, it has superior electrical insulating property even under high temperature conditions. 4. Ceramic fiber casing possesses good dielectric property, chemical resistance, excellent flexibility and elasticity.
Q:What is the raw material of ceramic fiber?
Ceramic fiber is a fibrous and light fireproof material with such advantages as light weight, resistance to high temperature, good heat stability, low thermal conductivity and specific heat, resistance to mechanical shock, etc., thus being widely used in such industry as machinery, metallurgy, chemical industry, petroleum, ceramic, glass, electronics, etc.
Q:Who can tell me what ceramic fiber blanket is?
Products of ceramic fiber, made by using ceramic fiber as material, refers to industrial products with light weight, high temperature resistance, good thermal stability, low thermal conductivity, low specific heat and mechanical shock resistance and other advantages. It is exclusively applied in all kinds of high temperature, high pressure and environments where it is easy to wear.
Q:What is the difference between nanometer ceramic board and ceramic fiber board?
The difference between nanometer ceramic fiber board and ceramic fiber board is as follows: The traditional ceramic fiber board with good heat insulation and high temperature resistance is widely applied in some furnaces, but some deficiencies, such as low strength, still exist in this kind of traditional products, which restricts its application in furnaces with high temperature, high pressure and stress. However, product performance is greatly improved with the introduction of nanotechnology and the use of special manufacturing technique. It has high strength, low thermal conductivity, good thermal insulation performance, obvious energy saving effect, which can improve the safety of furnace and develop performance of the product under the condition of high temperature and high pressure.
Q:What’s the maximum bearing temperature of the refractory and high temperature resistant ceramic fiber cotton?
It depends on what material the ceramic fiber gasket uses. It’s usually referred to high temperature gasket made from ceramic fiber paper. It is generally classified into normalized form and high alumina type, of which the former can resist the maximum temperature of 1260℃ and its continuous use temperature is 1000℃, the latter can be used for a long period at the temperature of 1200℃. Nichrome wire, stainless steel wire and glass fiber are reinforced. Ceramic fiber coating cloth and slag cloth, sintering ceramic fiber cloth and ceramic fiber fumigation cloth) Characteristics of the ceramic fiber cloth: high temperature resistance, low heat conductivity, thermal shock resistance, low thermal capacity; superior insulating property at high temperature, long service life; resistance to nonferrous metals like molten aluminum and zinc erosion; low and high temperature strength; innocuity with no adverse effect on the environment.
Q:What are the specifications and models of the ceramic fiber board?
For ceramic fiber board, there is no rated temperature, instead, classification temperature is generally called which includes four types: 1000℃, 1260℃, 1400℃, 1430℃, and 1600℃. Its continuous use temperature is usually 150-200℃ lower than its classification temperature.
Q:What's the function of ceramic fiber rope?
It can be widely applied in industries such as chemical engineering, electric power, papermaking, food, pharmacy, etc. and the sealing of boiler door, machine, pump and valve with high temperature and high pressure. It is suitable for medium such as clean liquid or slurry, salt water, emulsion, grease, hydrocarbon, solvent, pulp, etc.
Q:What is the price of high alumina ceramic fiber cotton?
High alumina ceramic fiber cotton is quite good in quality. High temperature resistant and insulated acupuncture blanket belongs to fireproof and fire-fighting material.
Q:What’s the difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket?
The difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket: refractory ceramic fiber material is a kind of lightweight and efficient heat preservation and heat insulation material. Its advantages are as follows: the volume and density of ceramic fiber as lining are low. Ceramic fiber lining is 75% lighter than lightweight insulating brick lining and 90%-95% lighter than lightweight castable lining. If fiber lining is adopted, steel structure load of furnace can be greatly reduced and the service life of the furnace can be prolonged. Heat capacity (heat storage) of ceramic fiber as lining is low: Heat capacity of ceramic fiber is about 1/10 that of lightweight and heat resistant lining and lightweight castable lining. Heat capacity of furnace lining material is proportional to the weight of the furnace lining. Low thermal capacity means that furnace absorbs less heat in the reciprocating operation and, at the same time, the speed of warming gets faster, which greatly reduces the energy consumption of the furnace temperature operation and control and especially plays a very significant role in energy saving effect in the starting-up and blowing-out of heating furnace. Thermal conductivity of ceramic fiber as lining is low: When the average temperature is 400℃, 600℃ and 1000℃, thermal conductivity coefficient of ceramic fiber as lining is less than 0.1w/mk, 0.15w/mk and 0.25w/mk respectively, which is 1/8 that of lightweight fireclay brick and 1/10 that of lightweight and heat resistant lining. Ceramic fiber as lining has prominent insulation performance. Ceramic fiber as lining is easy to construct: Expansion gap is not needed during the construction process. Construction personnel can start to work after basic training and construction technology has little effect on the heat insulation effect of lining.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range