Cement kiln with high alumina brick

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

水泥窑用不烧高铝砖

项目
tem

A

PA

TP

Al2O3 %

75

77

70

显气孔率, %
A.P.

-

-

19

体积密度,g/cm3
B.D

2.65

2.70

-

常温耐压强度,Mpa
CCS

60

65

65

荷重软化温度0.6℃
RUL

1300

1250

1500


Specification:


Product characteristics, combining high alumina brick P and phosphate and nitrate high alumina brick wear-resisting brick PA in yangquan super bauxite clinker as aggregate, respectively using nitrate and phosphate as binder, after high pressure forming, the temperature in the processing and into. Product has good abrasion resistance, good resistance to spalling at the same time also has the potassium sodium sulfur chloride alkaline salt erosion resistance, such as performance, is widely used for preheating zone, decomposition and wicket, cooling machine, etc. Special phosphate combined with high alumina brick TP is on the basis of the phosphate combined with high alumina brick, by adding additives to improve the refractoriness under load, high temperature performance of products, widely used in the transition zone of middle and small dry kiln and the wet kiln and the calcining zone, can also be used in large dry kiln seat belt cover, wicket, cooling machine, etc.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are required for high temperature refractory bricks?
Volume density, aluminum content, soft bearing, thermal shock
Q:Can common cement mortar be used to build the lining of chimney refractory brick?
No. You have used fire bricks, which shows there is a certain temperature inside, you'd better use refractory cement
Q:Expansion ratio of light corundum fireproofing brick
And then the appropriate drying, the using temperature 1500~1700 degrees of light corundum brick, the porosity is 70% to 80% Now, use foaming method to produce light corundum brick, 3g/, shaped idiosome with mould dry for 4 days in 60 degree to 70 degree oast, it will demoulding, foaming method and evaporating method produce light corundum brick, the thermal conductivity is 0. the containing of AL203 has difference, the corundum brick that use corundum hollow sphere to produce contain the highest AL203 Finished light corundum brick don't have accurate shape and size after firing.8 1, so products need mechanical or manual cutting after the kiln, finally, firing in 1300 degree and 1550 degree, basically still meters with water forming, just add to burn: 50~60h, because its production methods and the introduction of additives are different, the total sintering time.17W/, light corundum fireproofing brick can be made into density is 0, withstand voltage strength is 4MPa, the containing of A1203 is no more than 99%.
Q:Why can't build refractory brick behind the skew block?
refractory is heat expansion and cold contraction, it is also called refractory brick, can resist high temperature up to 580-770 degrees. Mainly used for the smelting furnace. faint yellow or brown, when it is high temperature, it will squeeze toward the center. Refractory material made of refractory clay or other refractory raw materials. the shortened form of fefractory brick is brick. vault will be extrusion deformation. Refractory material with a certain shape and size
Q:Should kiln be warmed before the ignition of the new furnace?
If you don't have to heat up the furnace. The new furnace must be heated up, and the temperature should be increased according to the heating-up furnace curve, so the current situation you meet is appeared
Q:What is the heating temperature in the test method of thermal shock resistance of refractory bricks
1, quenching (air cooling or water cooling), after the completion of the specified number of times. 2, maintain 20min, introduce the following types briefly. 3, repeated testing and record the times of the material produces macro cracks. The thermal shock resistance is shown by the times of thermal cycle of damaging half of the heated end face, quenching(air cooling or water cooling ) there are many expressions and testing methods of the thermal shock resistance, and then dry. Put the heating end surface of standard size brick((200~230mm) X (100~150 m K (50~100mm) claw)into the preheated to 1100 DEG C 50mm in furnace, quenching (air or water), then quenching in room temperature water for 3min, measured the maximum temperature of sample surface produces cracks. After the temperature of the material rises to a predetermined temperature, the ratio of residual anti-bending strength and anti-bending strength at room temperature before heat shock, after the material rises to various temperatures, measure its strength retention rate.
Q:is it good to use firebricks to preserve the heat of rto furnace? Is there any other good ideas?
Operating noise is very low, having a very strong chemical stability: The thermal conductivity is lower than 0 at normal temperature, it not only reduced the cost of the project of RTO furnace, but keeps the indoor heat dissipation heat better and reduce noise pollution. the temperature of RTO furnace surface is low after using the ceramic fiber lining to keep the heat, thereby reducing the addition of auxiliary fuel : ceramic fiber has a good thermal shock resistance: The dosage form of HLGX-589 and HLGX-312 ceramic fiber material is shown in figure RTO furnace thermal insulation material. C, good thermal shock resistance, without reserving expansion joints, ensure the lining intact, not easy to be affected by the harsh combustion atmosphere inside the RTO furnace, can deal with the temperature changes caused by periodic replacement of RTO furnace inlet. The furnace is new energy-saving furnace developped recent 30years that used for eliminating harmful exhaust gas caused by steel or paint spraying. it has long service life, high chemical stability, no heat preservation precedent for refractory bricks; B, good heat insulation effect.
Q:What are the main components of refractory bricks
Mainly is magnesium oxide, sodium silicate as a binder
Q:why the color of refractory brick is white after high temperature firing when the meteorite is black after the burning?
There are different reasons. Meteorolites can mainly be divided into three types, iron meteorites (iron nickel alloy): Stone meteorites (the main component is silicate), and stony iron meteorites(the mixture of iron and silicate)
Q:How much fireclay is needed per cube refractory bricks?
Normal refractory bricks need to use 70-80kg refractory mud each cubic . In fact, this can be calculated, because the volume of refractory bricks and refractory mud density can be measured. Of course, here is an important point, that is the size of the brick seam, 1mm brick seam and 3mm is significantly different. Sichuan brand refractory mud has many kinds, like high aluminum, clay, corundum, magnesia, insulation and so on, the dosage is different.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range