Cement Factory Raw Material Natural Bauxite of Bauxite Size 0-5mm for Turkey

Ref Price:
$288.00 - 588.00 / m.t.
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
20000 m.t.
Supply Capability:
10000000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Structure of Calcined Bauxite Description

Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron.  From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle.  Very difficult to melt.  Insoluble in water,  soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material. 

 

2.Main Features of the Calcined Bauxite

Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum

hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there. By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns. 

3.Main usage of the Calcined Bauxite

Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc. 
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department. 
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties. 

 

4. Calcined Bauxite Images

 Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

Best Price Natural Bauxite of  Bauxite  Size 10-20mm

Best Price Natural Bauxite of  Bauxite  Size 10-20mm

5. Calcined Bauxite Specification

Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

Rotary Kiln Calcined Bauxite SEMI L.F Specification : Al2O3 : 83.00 + % Fe2O3 : 3.5 % SIO2 : 5 To 6% Cao : 2.5% TIO2 : 4 % , Size : 0-1MM OR 1-3MM

Rotary Kiln Calcined Bauxite G.G.NO.1 Specification : Al2O3 : 80.00 + % Fe2O3 : 3.8 % SIO2 : 6 To 8% Cao : 2.2 To 2.5% TIO2 : 5 To 6 % , 0-1MM OR 1-3MM

Rotary Kiln Calcined Bauxite G.G No.2 Specification : Al2O3 : 78 % Fe2O3 : 4 TO 4.2% SIO2 : 8 To 9 % TIO2 : 6.00 % Cao : 2.50 % , Size : 0-1MM OR 1-3MM

Rotary Kiln Calcined Bauxite G.G No.3 Specification : Al2O3 : 75 % Fe2O3 : 4 TO 4.5% SIO2 : 9 To 11 % TIO2 : 5.00 % Cao : 3.00 % Size : 0-1MM OR 1-3MM

Or as per buyes requirements.

 

 

6.FAQ of Calcined Bauxite

Cement Factory Raw Material Natural Bauxite of  Bauxite  Size 0-5mm for Turkey

1.Reply your enquiry in 24 working hours,any time you can contact me.
2.OEM, buyer design, buyer label services provided.
3.Exclusive and unique solution can be provide to our customer by our   well-trained and professional engineers and staffs.
4.we can provide free sample for your check
5.we have the certification of ISO 9001
6.Special discount and protection of sales area provided to our distributor.
7.timely delivery
8.packing can make client brand.
9.Good after-sale service

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the principal part of silicious refractory material
blast furnace hot blast stove and ceramic tunnel kiln vault, etc., the softening temperature under a fixed load is high (1690-1710 degree), glass melting furnace, lightweight silica bricks and generally the silicon dioxide is greater than 93% and used above the 600 degree. I had undertaken to complete the 50,000 tons over two advanced silica brick production line design. It is a typical acidic refractory. At present, it is mainly used to coke oven which the masonry operating temperature is higher than 600 degree, with good acid resistance of slag erosion, including silica brick, good thermal conductivity, high thermal vibration stability, product with fused quartz, close to its refractoriness silicious refractory SiO2 which is as the main component of refractory products.
Q:Where is refractory used? Thank you!
According to its refractoriness, it can be divided into ordinary refractory (1,580℃ to 1,770℃), high class refractory (1,770℃ to 2,000) and super refractory (above 2,000℃); according to chemical property, it can be divided into acid , neutral and alkali refractories, and including refractory used for special occasion. The current definition of refractory do not only depend on whether the refractoriness is above 1,580℃. At present, refractory is widely used as inorganic nonmetallic material of production equipment lining in metallurgy, petrifaction, cement, ceramics, power, etc. Refractory generally has good thermal shock resistance, chemical attack resistance, low thermal conductivity and coefficient of expansion, widely used in chemical, construction material, mechanical manufacturing, and ceramics, accounting for 50% to 60% in the total output. It can resist high-temperature action. Refractory has many varieties. Refractory materials are widely used in metallurgy; chemical properties divided by acidic refractories. In addition, cement, silicates. Refractoriness refers to that when cones sample made from refractory has no load. Currently, refractory refers to that is widely used in metallurgy, including neutral refractory and basic refractory.
Q:Does anyone know the characteristics of refractory for glass kiln?
The characteristics of refractory for glass kiln: First, it can well resist the erosion of glass fusant and gas actor, and has sufficiently high load softening temperature and thermal stability. Usually we hope the refractories of all parts of the furnace will has no partial early erosion phenomenon to ensure that the entire furnace has a sufficiently long service life. However, due to the different mechanical, physical and chemical conditions of different parts of glass furnace, the performance of refractories should adapt to the glass furnace thereto and at the same time has no adverse effect on the adjacent other kinds of brick materials. Besides, we should consider the price of brick material, we should try to consider using commonly used stereotypes bricks of standard sizes which is cheap and quickly supplied by the warehouse. The damage of glass melting furnace lining is mainly due to chemical erosion, assisted by thermal stress. The degree and speed of chemical erosion is closely related to the applied parts, furnace temperature and melting glass varieties, and of course, the quality of the lining itself is also crucial. The nature of refractories using in the glass furnace has a very significant impact on the operation of glass melting furnace and the quality of glass. The application of poor main beam refractories will not only cause frequent shutdown for maintenance, limiting melting temperature, lowering furnace output, but also shorten the life of the furnace, and make glass has a variety of defects (stripes, stones, etc.), lower the quality of the glass. Here are the description of the nature and purpose of commonly used refractory in glass furnace.
Q:What are the use of fire-resistant material and admixture?
Generally speaking, there are several admixtures: 1. Water reducing agent. It can ensure basic refractory castable flow value and significantly reduce its water mixing amount sodium hexametaphosphate and sodium tripolyphosphate 2. Plasticizer. It can increase plastic refractory mixture and enhance the ability of bentonite clay mud material stress strain 3. Gelling agent. It can make the colloidal solution (or suspending liquid containing solid particles condensed gelling agent 4. Dispergator. It can turn condensation or reunion colloidal particles (particles) into sol or uniform dispersion suspended particles and make the thick colloid free stream sol said scattered coagulant peptizer 5. Coagulant. It can shorten the stereotypes refractories condense sclerosis NaOH Mars between aluminum hydroxide, etc. 6. Retarder. It can delay the stereotypes refractories condense sclerosis between citric acid tartaric acid, etc. 7. Delayed coagulant. It can make setting fire-resistant materials contain binder by set out the condensation hardening effect between calcium aluminate cement, etc. 8. Foaming agent. It can reduce the liquid surface of power to produce uniform stability as rosin soap bubble resin fat saponin and so on. 9. Antifoaming agent. It can make fast setting fire-resistant material mixing or shock in produce bubbles escape alcohol fatty acids, such as 10. Shrink agent can reduce or prevent the refractory materials used to produce contraction type heating said silicon powder stabilizer or volume expansion agent, etc. 11. Preservative. It can keep setting fire-resistant material stored on construction performance change or change oxalic acid citric acid, etc. 12. Inhibitors. It can inhibit stereotypes refractories ingredients contain iron or iron compounds and acidic reaction caused inflation to produce hydrogen bond CrO3 diacetone alcohol, etc. I hope it can help you.
Q:Who knows what kind of material the fire-proof plate use, and is it good?
It is the decorative board made by adopting silicious material or calcareous material as the main raw material, and blending them with certain proportion of fibrous material, lightweight aggregate, adhesive and chemical additive before steam pressing. It is a kind of new material and more and more frequently used currently not only for it is fireproof. Construction of the fire-proof plate has higher requirements on the adhesive, and the price of the fire-proof plate with better quality is more expensive than that of the decoration panel. The thickness of the fire-proof plate is generally 0.8mm, 1mm, and 1.2mm. So it is the best material for making cupboards.
Q:What is the importance of silicon powder in refractory processing?
it can certainly improve the fire resistance
Q:What are the standards of refractory concrete ?
It can be divided into: 1. Ordinary refractory concrete Aggregates used include high alumina, clay, silica, basic materials (magnesite, chromite, dolomite, etc.) or special materials (carbon, silicon carbide, zircon, etc.). It can also use several combination of refractory material. 1. Thermal insulated refractory concrete It is mainly formulated with refractory light aggregates. The light aggregate used can be expanded perlite, vermiculite, ceramsite, porous chamotte, alumina hollow ball, etc. It can also be a combination of several refractory light aggregates or combination of the refractory aggregates. The aggluetination material used in refractory concrete can be high alumina cement, phosphate binders, water glass binder and clay, etc.
Q:What defect does fused cast refractories have ?
What defect doesfusion-cast refractory material have ? In glass production, in addition to refractory as a building material and consider its durability, we still must attach great importance to its influence on glass quality. In such cases, the impact on the quality of glass is mainly the defects that eroded down refractory materials mixed in the glass, thus being prodeced of grass products. Defects are mainly foreign body defects such as sand, knot and wave reinforcement. What may directly affect the quality of glass are sidewall block and brick kiln bottom. I hope my answer can help you.
Q:What refractory material lead smelting furnace needs?
Q:Who knows about the grade C fireproof door materials?
I am happy to answer your questions. Wood or steel materials are usually used. The new national standard fire doors: According to the enacted GB12955-2008, the fire endurance of grade C fire doors is 0.5 hours and that of grade A and B are 1.5 hours and 1.0 hours respectively. I hope my answer can help you.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range