CE and TUV Approved 90W Poly Solar Panel

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
10000 watt
Supply Capability:
20000000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Polycrystalline Silicon Max. Power(W): 90 Number of Cells(pieces): 36
Size: 920×670×30

Product Description:

1. The Introduction of Solar Module

Solar modules use light energy from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells.

2.Technical Parameter

Type

CNBM Solar Polycrystalline Series

Materials

Silicon

Guarantee

12 yrs free from defects in   materials and workmanship

No less than 90% within   10yrs and no less than 80% within 25yrs

TUV(IEC61215&IEC61730),   CE, UL

Application

 Photovoltaic/ solar/ green energy/ energy saving

Descriptions

1.High   efficiency crystalline silicon solar cell. Even if under the weak light, the   solar module can produce maximum power output.

2.Tempered glass   (toughened glass): Anti-reflecting coating and high transmission rate glass   increase the power output and mechanical strength of solar module.

3. EVA and TPT:   Using high quality EVA and TPT to prevent destroying and water.

4. AI frame:   Without screw, rner connection. 6 holes on the frame can be installed easily.

5. Junction box:   Multi function junction box with water proof.

6. Long   lifetime: ≥25 years; Less power decrease.

7. Good   performance of preventing from atrocious weather such as wind and hails.

8. Resisting   moisture and etching effectively, not effected by geology.

9. The   certificate issued by international authority: UL, TUV, IEC, CE.

 

Packaging Details:

26pcs/pallet, 28pallets/ 40HQ 

Our solar panels are packed in cartons, and then pallet. 

Shipping by sea or by air are both ok, it up to customer’s chose.

We’d like to inquiry the freight cost for customer after be informed exact quantity and destination address.

3. Application and Pictures of Products

CE and TUV Approved 90W Poly Solar Panel

CE and TUV Approved 90W Poly Solar Panel

CE and TUV Approved 90W Poly Solar Panel

4. How to Work

CE and TUV Approved 90W Poly Solar Panel

5. Packing Details

CE and TUV Approved 90W Poly Solar Panel

6. FAQ

Q1: What is the business type for the company?

A1: We are one of the biggest manufacturers in zhejiang.Chnia. Which is a high tech PV enterprise dedicated to the research, development, production and sales.. 

Q2: How long solar panel warranty can you offer?

A2: 10-Year product warranty,25-year linear power output warranty

If there is any quality problem, we will pay for freight and send free parts to you.

Q3: How many certificates do you have?

A3: We have 16 certificates,such as CE, TUV, UL, and so on.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Are solar panels only effective in places where there is an abundance of sunlight?
Solar panels generate power only during sunshine hours. But they only need sunshine, they don't like the heat, that comes along with the sunshine. So its a trade off, the places that have a lot of sun, also have a lot of heat, and places that do not have a lot of sun are not that hot. But you do need sunlight to run solar panels. There's a lot of tools available which can tell you how much power you are able to generate given your location.
Q:How do you connect solar panel?
You need a charger Controller but 55 watt panel is not a whole lot of power. So yes you can buy a very good one but it will cost a lot more. For a 55 watt panel you only need a 4 to 7 amp controller. But why not buy a 0 amp so you can add a second solar panel etc... A PWM (Pulse Width Modulated) is the cheapest and most robust type MPPT (Maximum Power Point Tracking) These controllers actually detect the optimum operating voltage and amperage of the solar array and match that with the battery bank. The result is additional 5-30% more power out of your array versus a PWM controller So unless you have a system over 200 watt the PWM works very good I have two of the PWM myself
Q:Are our scientists making solar panels all wrong??
There are two basic types of solar panels. ) Thermal absorbers 2) Photovoltaics Thermal absorbers are black in order to convert sunlight to thermal (heat) energy. The whole idea is to capture all of the light with a dark surface, convert it to thermal energy and transfer the energy into your home for water heating or space heating. If you make the surface white or reflective, then the surface will absorb only a small fraction of the available light, hence the efficiency will be very low. In other words, the panel will not produce any heat. Photovoltaic panels produce electricity instead of heat energy. Photovoltaic panels are made from thin slices (“waffers”) of silicon with special coatings on the front and back surface. One of these coatings on the front is an antireflection coating to capture the light and channel it toward the silicon. Underneath the antireflection coating the silicon waffer is coated with other chemicals that convert the sunlight to electricity. The combination of these coatings gives the panel a dark color, usually blue or black. Here's the bottom line. If you want thermal heat or electricity from solar panels, the panels have to capture the light. When that light is captured, the surface appears dark because no light (or very little) light is reflected back to our eyes. It is not possible for a surface to be an efficient absorber, capturing all available light, and at the same time appear white or bright color or reflective to our eyes.
Q:Solar panel help please?
Solar water heating is low technology. There are do it your self plans for it all over the internet. There is no electricity involved. Simply laying a garden hose on the ground in the hot Sun can heat the water to really high temperatures. Just have a shutoff nozzle on the hose, turn on the tap and open the nozzle until water comes out and then close the nozzle at the end of the hose. Let the hose full of water sit in the sun for an hour or so and then open the nozzle and feel how hot the water is that comes out. Be careful, because it can be so hot you can get a burn! When the gallon or so that can fit in the hose has all come out and is replaced by other water from the tap, it will feel cold again. Close the nozzle and wait another hour to heat it up again. A solar hot water heater is just a very long coil of pipe in the Sun, maybe with a pump to slowly circulate water from a holding tank so you can make and store more hot water that fits in the hose. Solar electric power is completely different. It uses semiconductor devices called solar cells to make electricity directly from light. Many of solar cells are usually arranged into large panels to make larger amounts of power. In electricity, Watts = Volts * Amps. Battery capacity is usually measured in Amp-hours. Small solar panels are often designed to produce electricity at 2 volts. A 60 Watt, 2 volt panel makes 5 Amps of electric current, because 2*5=60. So if you use it to charge a 2 volt battery with a capacity of 5 Amp-hours it will take hour to charge. A 0 Amp-hour battery would take 2 hours to charge with the same panel.
Q:What size and watt solar panel?
I think that typical solar panels are 2'x4' and produce something like 800-000 wh per day. (That's 0.8 - kwh per day.) More in the summer, less in the winter, if they're aimed sort of at the sun. There are newer, more expensive panels that produce more. There are also thin film panels that are less expensive, and probably more sturdy. You then have a couple choices. In a house, you'd have an expensive inverter to connect to the utility power, so you can have power at night when your panels aren't generating anything. In a trailer, you want 2-4-6 deep cycle car batteries to store the power. Then you could have an inverter to convert that power to 20v AC, so you could use normal appliances. Or, you could buy appliances that run on 2 volts DC. Maybe a combination of both. You'll need to figure out how much power you're going to use, so you know how many panels and batteries you're going to need. The calculation is easy. Figuring out how much power you need is hard. You need deep cycle batteries because you can repeatedly charge them way up and run them way down. Ordinary batteries die fairly quickly when you do that.
Q:Can I install solar panel straight to battery on my truck?
If you were going to do that it would have to be the right size solar panel and you would need a solar battery charger so it doesn't fry your car battery
Q:how much does solar panels cost for you home?
Just to be sure - when you say solar panels - are you thinking of hot water or electricity? For electrical power the system must photovoltaic.
Q:Solar panel placement idea?
outside is going to be much better. You can't tell but glass is actully opaque to many ranges of 'light'. If you look at advertising for windows you may see claims to reduce sun fading of your carpet/ furniture. That is because the glass blocks UV. Solar panels get some of their energy from UV light. Also some windows are engineered to block IR to help insulate better when the house is cooler than the outside. Again, solar panels get some of their energy from light in the infrared range. And finally if you're charging batteries the 'off angle time' is still important. The amount of light absorbed is pretty closely related to the cosine of the angle that the sun is 'off' of the direct. so when the sun is 45 degrees off of perpendicular the panels still get cos45 =.707 or about 70% of the available energy. (In practice it's a little less than that because not as much energy gets to the panel to be absorbed as at midday). But anyway, you can figure two hours of morning or late afternoon sun will give you as much energy as hour of midday sun. So if the panel is inside, you miss out on that available energy.
Q:I need help with a solar panel?
You not only need a diode, but a circuit that opens the circuit if the voltage falls below a certain level. The diode is not the problem, but the batteries powering the solar panel when the voltage falls to low.
Q:How to connect solar panels to batteries?
You okorder.com/

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range