Solenoid valve series, specially used with water, liquid
Packaging & Delivery
about 25 days for MOQ
Solenoid valve series, specially used with water, liquid.
NBR:0°C~80°C, EPDM:0°C~120°C, VITON: 0°C~150°C
10°C to 150 °C
Air, water,steam etc.
others upon request
IP 65,100% ED
3. Production line
5. Our service
We have more than 12 years experience in solenoid valves.
Excellent quality control is one of our main principles.
Our design, producing and testing are strictly complied with ISO9001 standard.
Now our products are being exported all over the world.
We provide OEM service, accept customer label, develop the product with your drawings or samples.
Any question, will be replyed within 24 hours.
Send a message to us:
Q:What is the size and length of the DN80 gate valve? 10 kg and 16 kg, respectively?
Valve structure length standards are PN16, short series for 203mm, long series for 280mm, flange size by PN16.
Q:What does the gate valve SZ45X-1.0 stand for?
Z- stands for gate valves, 4 for flange connections, 5 for wedge wedge single gate, X for rubber seals, and 1.0- for PN1.0MP
Q:Which is more expensive, bronze gate valve or brass gate valve?
But the obvious weakness of brass is its poor strength, relatively large volume, and its lack of corrosion resistance.
Q:What kind of valve is gate valve? Is it different from the cut-off valve?
Gate valve and the role of the cut-off valve, are playing a role in isolation. The difference is that the gate valve and the cut-off valve are constructed differently. Fluid from the gate valve flow and flow direction is straight, there is no change in direction, but in the cut-off valve is from the bottom of the valve flow into the flow from the upper part of the spool.
Q:Does the tap belong to a stop valve or a gate valve?
Most taps are stop valves:1, gate valve (gate valve) is a headstock ram, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed doors, discomfort pumpsparameters vary, usually 5 degrees is not high, medium temperature is 2 degrees 52'. To improve its manufacturability, make up for the deviation of the angle of the sealing surface during processing. This gate is called an elastic ram.2, valve (stop, Globe, Valve) of the opening and closing parts are plug shaped valve, sealing surface is flat or sea cone, the valve along the center line of the valve seat in a straight line movement. Stem form of exercise (generic name: dark bar), but also lift rotating rod can be used to control air, water, steam, all kinds of corrosive media, mud, oil, metals and radioactive liquid media and other types of fluid flow. Therefore, this type of shut-off valve is very suitable for cutting or regulating and throttling. Because of the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional, is very suitable for flow regulation.The stop valve is an ascending stem type, and the handwheel rotates and rises along with the stem. Valve is hand wheel rotation, stem upward movement. Flow is not the same, the gate valve requires full open, the cut-off valve is not the same. The gate valve has no inlet and outlet direction requirements, and the cut-off valve has the required inlet and outlet!
Q:What are the advantages and disadvantages of flat gate valves?
The advantage of flat gate valve is that the flow resistance is small, and the flow resistance is similar to the flow resistance of short valve. The flat gate valve with guide hole is installed on the pipeline and can be directly cleaned with the cleaner. As the gate is sliding on the two seat surface, the flat gate valve can be applied to the medium with suspended particles, and the sealing surface of the flat gate valve is actually positioned automatically. The seat seal surface is not subject to thermal deformation of the valve body. Moreover, even if the valve is closed in cold condition, the thermal elongation of the stem will not cause the seal to be subjected to overload. The length of the structure is much shorter than that of the ball valve, and it is easier to start. Light plate gate valve is more refined, but the effect is exactly the same.
Q:What does gate valve do?
Like other valves, the gate valve is used to block fluid flow. Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle.
Q:Is the check valve in or behind the gate valve?
Pump outlet, check valve, gate valve.Gate valve plays a regulatory role, is the main pipe. Such a sequence can ensure that the water flow during power failure does not cause damage to the gate valve.
Q:Will the water supply and drainage to wear civil air defense gate valve, the use of bright rod or dark rod?
2, soft sealing gate valve at the bottom of the pit. No accumulation of slag material, valve opening and closing of the failure rate is low;
Q:What is the difference between the copper gate valve and the ordinary material gate valve?!
The material of general gate valve is cast iron, and the copper gate valve should be used in special requirement.