Casing Elevator/Spider
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 5 Sets per Month set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1.Casing Elevator/Spider
2.type:SE
3.API Spec 8C ISO9001:2008
4.GB/T 28001-2001
5.GB/T 24001-2004-ISO14001:2004
The SE350 and 500 Ton Casing Elevator/Spider Units are pneumatically operated power tools, capable of handing casing sizes from 4 1/2 to 14 inches, with string loads of 3150kN(700,000 pounds) for the 350 ton unit and 4500kN(1,000,000 pounds) for the 500 ton unit.
| Unit Height | American Units | Metric | ||
| 500 | 350 | 500 | 350 | |
| Elevator with Bell Guide (Less Guide and Slip Assy.) | 4,265 lbs | 3,600 lbs | 1,941 kg | 1,634 kg |
| Spider (Less Guide and Slip Assy.) | 4,065 lbs | 3,400 lbs | 1,850 kg | 1,543 kg |
| Unit Height | American Units | Metric | ||
| 500 | 350 | 500 | 350 | |
| Elevator with Bell Guide | 43 | 38 | 109.2 cm | 96.5 cm |
| Spider with Guide | 37 | 32 | 94 cm | 81.0 cm |
| Bell Guide | 10 | 10 | 25.4 cm | 25.4 cm |
| Unit Diameter (Max.) | 50 | 42 1/2 | 127.5 cm | 107.9 cm |
| American Units | Metric | |
| Dimensions | 41 1/2″×41 1/2″×3 1/2″ | 1055mm×1055mm×89mm |
| Weight | 1000 lbs | 455 kg |
- Q:Specific depends on what number you are cone sets, you can compare:0 1:19.212 9.0451 1:20.047 12.0652 1:20.020 17.783 1:19.922 23.8254 1:19.254 31.2675 1:19.002 44.3996 1:19.180 63.348
- Not enough detail ah, a few cones are not aware of their comparison, followed by cone sleeve diameter0 1:19.212 9.0451 1:20.047 12.0652 1:20.020 17.783 1:19.922 23.8254 1:19.254 31.2675 1:19.002 44.3996 1:19.180 63.348
- Q:How do you determine the size of the drill sleeve with a drill diameter of 6?. Thank you
- The inner diameter of the general drill sleeve can be chosen by H9, but the deformation of the drill sleeve after the quenching has to be considered
- Q:I wonder if it works Because of the large number of drilled holes, the wear of common steel is relatively large. But T10 steel needs quenching. I don't have any specialized equipment here. Usually it is heated by oxygen acetylene, and then it is quenched by oil. I wonder if T10 steel is good. What about the deformation? Outside diameter 15mm, inner hole 8.6MMIf not, what is the best way to do it? Or what to replace?
- Tolerable。 T06 or T08 can, but should not wear very fast quenching, the inner diameter of H8, H9, such as the outer diameter with H8/n7 this can often remove.
- Q:What kinds of drill sleeves are used? What are they used for?
- Drill sleeve can be divided into four kinds, namely: fixed drilling sleeve, interchangeable drill sleeve, fast change drill sleeve, special drill sleeve.Fixed drill sleeve: drill sleeve is directly pressed on the drilling template. The fixing drill sleeve is simple in structure and high in drilling accuracy, but it can not be replaced after wearing. Fixed drill sleeves are suitable for small batch production in a single drilling process.Replaceable drill sleeve: drill is sheathed in the Bush, bushing is pressed on the drilling template, and the drill sleeve is pressed by screw to prevent the drill bush from rotating or withdrawing. When the drill sleeve is worn, loosen the screws and replace them quickly. A single drilling procedure suitable for mass production.Quick change drill sleeve: its structure is similar to interchangeable drill sleeve. When the workpiece in one process has the same hole to be processed by various methods (such as drilling, reaming, reaming, tapping, etc.), the drill sleeve with different apertures can be quickly replaced. When replacing, the drill sleeve gap is turned to the screw and can be taken out.Special drill sleeve: when the structure of the workpiece is not suitable for the use of standard drill sleeve, it can design a special drill sleeve adapted to the workpiece. The height of the drill sleeve is increased by H, the guiding performance is good, the tool rigidity is improved, and the machining accuracy is high, but the abrasion of the drill sleeve and the cutter is intensified, and the H= (1 to 2.5) d is generally taken. The chip space H increases and the chip removal is convenient, but the tool rigidity and the machining accuracy of the hole will be reduced. Cast iron for drilling easier to remove chips, h= (0.3 ~ 0.7) d; drilling difficult to chip out of the steel parts, h= (0.7 ~ 1.5) d.
- Q:I have seen many drilling techniques in practice, and I find that drilling jigs do not have guiding elements (i.e. drill sleeves). Why do not they use drill sleeves in actual production? And I have seen in many books drilling jig, need drill sleeve of the statement, how is this matter?Reaming in our company is also done by drilling machines. Change the drill bit to the reamer. Do you want reaming?I asked the master of the workshop why the drilling fixture does not need to drill, they do not even know what the drill sleeve is, as if they are in the design of drilling machine clamp, there is no drill sleeve concept.I really don't understand why the drilling jig is using drill sleeves If it is for the tool, you can put on a processed product, and then the tool is ok. Why?
- In the actual drilling process, the drilling machine fixture should have guiding elements (drill sleeve).The role of drill sleeve is mainly used to determine the location of the drill bit, reamer, reamer and other fixed size tools, and the structure and size of the drill bush have been standardized. According to the characteristics of the use, the drilling sleeve has four types of fixed drilling sleeve, replaceable drill sleeve, fast change drill sleeve and special drilling sleeve. Moreover, the drill sleeve is inserted into the drilling template by "interference fit".The significance of drill sleeves is that they can locate and guide the machining of the cutting tools so as to improve the machining accuracy.
- Q:Drill 4.2 holes, tap 5 thread, choose what kind of drill sleeve
- 5 of the drill bit where to drill ah, with a drill clip on it!
- Q:How should the drill bit of the 4mm bit be calculated?
- Drilling sets play the role of drill guide and support, they should be coordinated with precision oriented, but also can not drill and drill sleeve between too much friction, usually with H7/g6 G7/h6
- Q:Can the drill jig designed in mechanical processing be without drill bush?
- You can drill without a drill sleeve, but that is a special and rare case. The drill sleeve is designed to prevent rapid wear and tear, and the clamp is seldom made of hard material, so most of the cases are made of drill sleeves.Don't set the diamond for example:1. folder specific very small, and simple structure, once in the diameter of 20 of the aluminum rod drill holes, I directly with a piece of Cr12 material made drilling mold, simple and fast2., the production of a single or very small number of cases, in order to save costs, then basically do not consider the amount of wear, you can not drill sleeves.
Equipped with excellent equipment, strong technique force and completed test facilities, the company is a first-level supply member of Chinese Petroleum and Natural Gas Consortium, as well as the member of China Petrochemical Material Resources Market. We have obtained the Production License issued by the nation.we believe that our company will usher in a new takeoff in the near future.
1. Manufacturer Overview |
|
|---|---|
| Location | Jiangsu,China |
| Year Established | 2000 |
| Annual Output Value | |
| Main Markets | North America South America Mid East Central America |
| Company Certifications | ISO 9001:2008;ISO 14001:2004 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | English, Chinese |
| b)Factory Information | |
| Factory Size: | 10,000-30,000 square meters |
| No. of Production Lines | 4 |
| Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
| Product Price Range | Low and/or Average |
Send your message to us
Casing Elevator/Spider
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 5 Sets per Month set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
