Q:I have a road bike that came with 700c wheels. So can I use 650c wheel on my bike and will it fit? What are the size differnce between 700c and 650c? I know that 700c is have like 622mm diamater or something but i dont know how many mm is 650c wheels.

650c wheels are 51mm smaller in diameter than 700c wheels. This means that the radius of the wheel is 25.5 mm smaller. It would be nearly impossible to find brakes that would fit. The smaller wheels would also put your pedals 25.5 mm closer to the ground increasing the chance of pedal strike. The smaller front wheel would also change the steering geometry of the bike. There is too big a difference between the two wheel sizes to make the switch EDIT: If the bike is too big for you, it will still be too big with smaller wheels. You might get a lower stand over height with smaller wheels, but the length of the top tube will not change and will still be too long for you

Q:Apply the knowledge of the circle to explain why the wheels are designed to be round?

The so-called circle, that is, in the plane to the fixed point of the distance is equal to the set of fixed points, fixed point is the center of the circle, which can make the wheel shaft (center) to the ground the same distance, and not bumps, so to design a round.

Q:Rolls Royce's wheel no matter how the turn, its wheels on the R logo is always up

That's because it's expensive.

Q:I have a Crittertail cage and the wheel attaches to the wires of the cage. Its the noisiest wheel EVER. I‘ll end up taking it out during the night and putting it back next morning. Is there such thing as a silent wheel that I can replace? Thank you in advance Hamster owners )

Really good! Her chewing on the bars wont hurt her teeth. The cage is a little to small for a syrian, I would recommend getting cheap tubes that can lead to different things or something. I have mine wrap around the backside of the cage with a little hous in the middle. The other thing is your not supposed to wash it with soap. Just use a little bit of Dish Soap(Unless that's what you meant that you were doing lol) And then rinse thoroughly becuase they don't like the smell of the soap or if some is still there it will agitate their skin. Just a little thing that I do is put toilet paper in there for her to shred and use as bedding.(: I hope that this helps!! Good luck!!

Q:I have an 09 impreza wrx and it has grey wheels on it. I want gold ones. Should I paint them is there any good paint for that. or should I just get new wheels what are sone good wheels to get. It is pearl white. Didn‘t know if paint was cheaper or just new wheels vs powdercoating or anything

Talk to people you know and find a reputable tranny shop, and get another opinion. Seems early for a tranny, even if you didn't maintain it.

Q:my skates runs kinda slow, i tried cleaning them but its kinda hard, how can i clean the wheels?

Spray the bearings with WD-40. That always makes mine go fast.

Q:its makeing a noise from the front lefti dont know if its a wheel bearing.i makes a rubbing/grinding sound eaven when your going 5mph or 50 mphwhat can it be.besides a wheel bearing?

your brakes mines did a whistle sound and if your rims are dirty and black its your brakes

Q:Production of running wheels where the manufacturers are good.

You can go to look at Shanxi Yong Xin forging the manufacturers, this is a professional production of walking wheel manufacturers.

Q:Just came back from the casino and noticed the consistency in the automated roulette wheel. When I mean automated, I don‘t mean the electronic wheel but a wheel where the ball is thrown by the machine. There was about 16 seconds between each throw and the ball comes out from the same spot and I‘m assuming at the same speed and etc. I was wondering is it possible to determine the general area where the ball will land depending on the previous result. Since everything is kept constant like the time between games and the path of the ball, I would think that theoretically the ball should generally lands about 10 - 20 numbers to the right of the previous result.

Maybe you've heard stories about biased wheels, and that some folks figured out ways to beat these wheels. I promise you that NO automated roulette wheel is going to be biased. In fact, no wheel that's been made in the past 15 years is going to be biased in any way. Try to beat roulette at your peril.

Q:Right now I‘m rocking some yellow orangatang stimulus wheels and I love them, I was just wondering if there are any wheels out there that slide better? I heard hard wheels slide really well. So which wheels, if any, slide better and easier than my orangatangs. if u no of any, could u list the specific kind. ThanksP.s.-I‘m not trying to brag about my wheels if it kinda sounds like thy

Check the Yellow Pages; I'm pretty sure there's several places that can either supply new tires for 'scoots or remove and replace them. Try the nearest Harley-Davidson dealership, for example. You might also try the nearest Goodyear or Firestone shop. Good luck!