Calcined Taixi Anthracite Coal used as carbon additive
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 MT m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Calcined Anhtracite :
It used the high quality anthracite as raw materials through high temperature calcined at over 2000 by the DC electric calciner with results in eliminating the moisture and volatile matter from anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. It has good characteristics with low ash, low resistvity, low sulphur, high carbon and high density. It is the best material for high quality carbon products.
Specifications of Taixi Anthracite Coal:
F·C % | V.M % | Ash % | Moisture % | Sulfur % |
95 MAX | 1.0M AX | 4.0 MAX | 1.0 MAX | 0.30 MAX |
93 MAX | 1.5 MAX | 6.0 MAX | 1.0 MAX | 0.30 MAX |
92 MAX | 1.5 MAX | 7.0 MAX | 1.0 MAX | 0.30 MAX |
90 MAX | 2.0 MAX | 9.0 MAX | 1.0 MAX | 0.40 MAX |
Usage/Applications of Taixi Anthracite Coal:
Mainly used in steelmaking in electrical stove, screening water, shipbuilding sandblast to remove rust,producing carbon materials
Packaging & Delivery:
Packaging:According to customers' request
Delivery:As soon as possible
- Q:After the long-term use of non stick pan, oil stains can not be effectively removed, over a long period of time in the non stick coating on the formation of a layer of coke, the effect of losing non stick. As a result of this layer of coke is relatively dense and smooth, scouring cloth has been ineffective, steel ball can not be used to damage the coating, what chemical or physical methods to remove this layer of coke?
- Soak in hot water for a few hours (or a day and night).Two, with cooking shovel (Mason's Pihui knife is best) to remove surface soft.Three, the same with a spade close to the bottom of the pot to eradicate. Until the last thing left is black.
- Q:What are the requirements for the quality of coke in blast furnace smelting
- Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%.Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test.
- Q:Various types of coal coke are the main test items
- If you need to test coal, caking index (G value), glial layer (X, Y) and other indicators, the index also includes the detection of more coal ash melting point (ash melting), hydrocarbon, the Hardgrove grindability index of coal, burning, swelling, activity, Oaxaca coal coal. Slag index.
- Q:Used in a restaurant?Dry or dry carbon carbon, coke or coke, and I do not know which word is a word of this sound. The use of coke for iron making. They are more than 1000 yuan price.The main problem is: dry carbon is coke?Toxic smoke, then the chimney can not do? Can I use the blower?
- Coke is bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.
- Q:Listen to a lot of people say that steel is now coke is not true?
- Steelmaking is definitely not coke, but now most of the very mature iron making technology needs coke, the future direction of development of iron is not used or less coke
- Q:I work in the coking plant, so there are conditions to get coke and is burning, I would like to use coke barbecue line? Just like charcoal Mutton Cubes Roasted on a Skewer, OK? Understand the answer
- Under the condition of air isolation, the bituminous coal is heated to 950-1050 DEG C, which is finally made into coke by drying, pyrolysis, melting, bonding, solidification and shrinkage.
- Q:Effect of coke powder ratio on the index
- 6, the size of coke in the blast furnace, coke screening is very important. We used the coke size requirements: large oven coke particle size greater than 40mm (1300--2000 square meters); small blast furnace coke particle size greater than 25 mm. But experiments show that some steel mills, coke size 40--25 mm good. More than 80mm of coke are screened to little change in the size range. This fragmentation of the coke uniform gap, small resistance furnace is running well.Purpose: various specifications of Shanxi foundry coke, metallurgical coke, coke car or high sulfur transport cars online sales. The specific indicators are as follows:Fixed carbon 83 or above; sulfur less than 0.5; 1.5 or less volatile; ash about E:Focal mechanism:Violin coke size 8 cm -150 cm:Metabituminous:Bulk modified coke:Size of 25 cm:
- Q:What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.
- Methods for determination of moisture content of coke, a method of introduction of a certain quality of coke samples, placed in a drying box, drying at a certain temperature to a constant quality. Calculation of the percentage of water content in the mass loss of the coke sample. Two. Reagent color silica gel: industrial products
- Q:What chemical plant used to coke
- Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage
- Q:Can the sulfur content of coke affect the casting process of nodular cast iron at 0.65?
- If the control is not good, the manganese content in the molten iron can be increased by increasing the reagent
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Calcined Taixi Anthracite Coal used as carbon additive
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 MT m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches