Quick Details of Eco-friendly Plastic Buckles For Bag
1.Material:POM,NTLON,PP...100% Eco-friendly and certified by RoHS.We can also supply metal buckles for you.
2.Color: different colors are available
4.Your design and Logo are welcome.
5.20 year’s experiences in production and have own R&D and mold department.
6.Pass the test of: Cold resistance test, Fog test, Oscillation test, Tension test
Specifications of Eco-friendly Plastic Buckles For Bag
Size: 3/4'' /1'' /1 1/4'' /1 1/2'' / 2''
Widely Used for Bags and Paracords.
Packaging & Delivery
1.Packaging Detail:inner:static film + PP bag per piece; outer:carton(L*W*H). Or according to customer's requirements.
2.Delivery Detail:Upon the quantity of order or as customer requested.
Service we can provide
1. Good after sales service: Any small problem happening will be solved at the most prompt time;
2. We have many years of experience
3. Specifications list is available upon your request
4. Welcome to send enquiry,we will reply soon.If you want to know more,pls feel free to contact us.
5. Prompt shipment with professional documents
6. Packing as your request, with photo before shipment
7. High quality and competitive price
- Q:What are the dangerous sections of the crane hook
- The crane hook has three dangerous sections, as shown in the drawing:The three dangerous sections of the hook are
- Q:Why does the crane have two hooks?
- There are two hooks in the double beam crane is a large tonnage crane, a small tonnage hook, use can be selected according to the use of heavy quality, heavy quality is small small hook can improve the efficiency and energy saving.
- Q:What is the wear standard of crane hook?
- Hook inspection:2.1 where a human powered lifting mechanism uses a hook to test the load at 1.5 times the rated load;2.2 hook for power driven hoisting mechanism, test load according to GB6067 - 85 "crane safety regulations" table 2;2.3 remove the hook load test, in the absence of any obvious defects and deformation under the condition of opening of the increase should not exceed the original opening of the 0.25%;2.3 hook should be able to support 2 times the inspection load without falling off; the hook should have manufacturing units certificate and other technical documents before they can be put into use.
- Q:How many centimeters should the crane hook be replaced?
- The question raised by the questioner can be understood as "how many centimeters of crane hooks should be worn"According to the above thinking, the problem of how many centimeters of the hook is not a fixed. Provide the following answers:1, the wear of dangerous section according to GBl0051.2 manufacturing hook, not greater than 5% of the original height;2, according to the standard used to manufacture the hook, should be greater than the original size of 10%.
- Q:Number 4, ~6, is a big fish
- If your 4-6 number refers to the words of Ise's 35 kg of carp fishing should not be a problem
- Q:What is the location of the cover plate embedded hook
- Only when making all rings size consistent, after the removal of embedded rings in order to maintain the verticality and exposed the same size, appearance.
- Q:How the bridge type crane holds the hook in walking
- You want the hook to move smoothly. Before you start, move it in the direction you need to go. Then move slowly and steadily while holding it! This starts without shaking!! When you swing in the walk, you need to increase the gear to stabilize the hook!
- Q:Elevator roof hook usually a few?
- General requirement is that there is at least one computer room, bearing capacity of not less than 2T
- Q:Hooks need to be made of I steel, and shall not be cold processing, what does it mean?
- First of all, do you have any design drawings? If so, you understand that I do not quite agree with the heating process, as it is not directly cold bending.Does the design institute want you to buy direct, non - cold machined rings?;Or they understand the cold processing is cold drawn and cold drawn, etc., does not include our site commonly used steel bending method, so direct processing steel bar is good, as long as not cold drawn.It's best to ask the design institute to call them and ask them what they mean
- Q:What safety device should be installed on the hoisting hook of crane
- 1. hook safety device. Mainly to prevent the crane when the work, the weight drop is hampered by the hook continued to decline caused by the rigging off hook accident. The utility model is characterized in that a spring cover is arranged at the opening of the hook, and the cover can not be opened upwards and can only be pressed downwards to prevent the sling from being discharged from the opening.2. reel safety device. The main reason is that when the transmission mechanism fails, the wire rope can not be arranged on the spool so that it can cross the end flange of the reel and cause the rope to bite.3 ladder retainer(1) when the ladder of the channel height is greater than 5m, set up from the platform above 2m retainer. Retainer should remain intact, does not appear too large deformation and small circle, open welding phenomenon.(2) when climbing the ladder is arranged on the internal structure, such as climbing the ladder and the spacing structure is less than 1.2m, can not be provided with a retainer.
HOOKDG provides competitive price, quality products and swift delivery. If you are interested in some of our products, please feel free to visit our website or contact us for more information. We are looking forward to establishing long-lasting business relationships with you in the near future.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 10 Million - US$ 50 Million
||North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||60% - 80%
|No.of Employees in Trade Department
||301 - 500 People
||above 2000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range