Q:What's the meaning of the ball valve bore 14 "x 12"?

The inner diameter of the two ends of the ball valve is 14 inches at one end and 12 inches at the other.

Q:Electric ball valve installation need to pay attention to what?

High valve valve installation tips using general notes 1, the single pole light to put Ji GUI lice before installing the valve should be cleaning the dust inside the pipe with stiff, welding slag and other impurities; connected with the valve connection standard standards 2, pipeline, operating conditions and valve performance.

Q:What are the uses and characteristics of copper ball valves?

4, good sealing performance5, the direction of installation is not limited, the flow of media can be arbitrary

Q:What does the RTFE say in the ball valve?

RTFE reinforced PTFE is more wearable than PTFETeflon PTFEThe seat of tetrafluoroethylene specified for a temperature range of ~200 DEG C -32. High temperature resistance and chemical resistance. Because of its high density and good permeability, PTFE can also prevent the corrosion of most chemical media.Conductive PTFE is an improved PTFE product that allows the current to pass through the lining and thereby cancel the insulation properties of ptfe. Because of its conductivity, conductive PTFE can not be checked by edm.+ reinforced PTFE RTFERTFE is a modification of PTFE material. Pure PTFE although very low coefficient of friction (0.02~0.04) but the wear volume is great, but also because of its easy creep, poor mechanical properties, low bearing capacity, poor dimensional stability characteristics such as friction material has great localization. Only modified by compound method to meet the special requirements of all walks of life sealing material on the wear resistance, to improve the wear resistance of PTFE, can be incorporated into some wear-resistant materials such as glass fiber, carbon fiber, graphite, molybdenum disulfide, bronze powder and some organic compounds, making them reticular junction formed in the PTFE layered structure so as to improve the the stiffness, thermal conductivity, creep resistance, and greatly improve the wear resistance.PTFE is composed of tetrafluoroethylene monomer polymerization of the polymer, the wax is similar to a PE transparent or opaque, its density is 2.2g/cm3, the water absorption rate of less than 0.01%. Its chemical structure is similar to that of PE, except that all hydrogen atoms in polyethylene are replaced by fluorine atoms. Because the C-F bond is high and stable in performance, it has excellent chemical resistance

Q:What does the sealing surface of the ball valve stand for HF?

HF is the abbreviation of two English words: "Hard Face", which means surface hardening. Usually surfacing is made of Tailai alloy (Alloy 6). Other surface hardening methods include hard chromium plating. This method is used more in the ball valve. But hard chromium plating is prone to small cracks, which reduces its corrosion resistance.

Q:That is to say, there is still a difference The man in the workshop said it was one thing... It's completely confusedHere are the data for the two valves. Please consult with the experts.Ball plug valve, high temperature cast steel, A216Gr.WCB flange, two pass, full quantity type 3, X 150LB RF ball / rod, 13%Cr seat, PTFE handle openBall valve Q41F-150LB-3"

Ball valve refers to the valve for the sphere of the valve, the English BALL VALVE, ball plug valve should be said that the plug valve, the disc is like a plug like, PLUG VALVE in english,

Q:What's English for ball valves?

Mechanical introductionThe main characteristics of the electric ball valve of the valve itself is compact, easy operation and maintenance for water, solvents, acids, and natural gas general working media, but also applies to poor working conditions of media, such as oxygen, hydrogen peroxide, methane and ethylene. Ball valve body can be integrated, or can be combination. Ball valve in the pipeline is mainly used to do cutting, distribution and change the direction of flow medium. Ball valve is a new type of valve widely adopted in recent years. The resistance of fluid is small, and its resistance coefficient is equal to that of pipe of same length.The ball valve is simple in structure, small in size and light in weight. Tight and reliable, at present, the ball valve sealing surface materials widely used in plastic, good sealing, vacuum systems have been widely used. Convenient operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control. Easy maintenance, ball valve structure is simple, the sealing ring is generally movable, disassembly and replacement are more convenient. In full open or full closed, the ball and valve seat sealing surface and dielectric isolation, the media through, will not cause the valve sealing surface erosion. Wide range of applications, from a few millimeters to a few millimeters, large to a few meters, from high vacuum, high pressure can be applied.It is generally believed that the ball valve is suitable for direct opening and closing, but the development of the ball valve has been designed to make it throttling and controlling the flow. The main features of the valve itself is compact, easy operation and maintenance for water, solvents, acids, and natural gas general working media, but also applies to poor working conditions of media, such as oxygen, hydrogen peroxide, methane and ethylene. Ball valve body can be integrated, or can be combination.

Q:PPR ball valve diameter is 3 cm, what is the specifications?

The PPR32 ball valve with the DN25 is a specification. (DN25 is the nominal diameter of the pipe and PPR32 is the outer diameter of the pipe)The PPR25 ball valve with the DN20 is a specification.

Q:Where to buy the ball valve?

Ball valve in the pipeline is mainly used to do cutting, distribution and change the direction of media flow, it only need to rotate 90 degrees of operation and a small rotating torque can be closed tight. Ball valve is the most suitable switch, cut off the use.

Q:Role of ball valve DN20-Q11F-16

Q11F ball valve is to control the circulation and cut-off of the pipeline medium.