Borehole Submersible Pump

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT or L/C
Min Order Qty:
1 Set unit
Supply Capability:
1000 Sets Per Year unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

For water supply from wells or reservoirs.For domestic usepfor civil and industrial applications

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How do I know if it's my well water pump, thermostat or water heater?
If you have no water at all, it is probably the pump. Check the circuit breaker for the pump before you do anything else. If the breaker hasn't been tripped, check the pressure guage (if there is one) near the well. If there is no pressure, it is definitely the pump. If the pump is operational (if it is operational, the guage will show a pressure reading), there could be a blockage in the pipe between the well and the house.
Q:Mercruiser 3L 4cylinder (water pump problem)?
I would be a little hesitant on using an automotive water pump on a boat. The may seem similar however there are several key differences in the way they are made. excerpt from the below URL: In regard to the cooling systems, one of the major differences is found in the water-circulating pump. This is especially noticeable when you have a raw water cooled engine. Unlike their automotive counterpart, a marine pump works in an open cooling system. This type of system is extremely corrosive to the pump. Therefore, the pump must be altered for longevity. A marine pump has a special ceramic seal, stainless steel backing plate, and a bronze impeller to resist corrosion. An automotive style pump, with its stamped steel impeller, would fail due to corrosion in a short time. I have done this before, I boat in fresh water and my boat was raw water cooled, the pump was leaking after 2 seasons, wasn't worth the savings. The extra hole may have been for an optional closed loop cooling system on the boat or like was stated a heater or bypass line in a car.
Q:Engine ticking after Water Pump Replacement?
Chrysler's 2.7 Liter Engine is pure garbage!!!!!! They start ticking and knocking and then they die. Sorry, I've been a victim of the 2.7 Liter as well. I had a 2002 Intrepid with 101,000 miles. It needed a THIRD engine installed. All those 2.7's sludge up and die. I heard the water pump is built inside of the engine itself...
Q:Do pond water pumps make noise?
i've got efficiently used that pump for ten years, recirculating water interior a fountain. it quite is not submerged and is thoroughly silent as long as you do no longer permit debris accrue on the impeller section. I double filter out the water earlier it is going into the pump. that's wiped sparkling via unscrewing the bleed-valve on the top and letting the debris be cleared. you could take it aside there, too, yet take care re-assembling because of the fact the o-ring is comfortable.
Q:Could someone tell me the procedure for removing & installing a water pump on 97 buick skylark 3.1L 3100 SFI?
wow.. lol, did ya look that up in a book. very precise..lol, but kinda correct.. being i work for gm and all..lol... simple hand tool will do it.. listen to the guy who copies it from a book.....loll..lol
Q:Play-more tag along camper water pump problem plz help?
Check to see if the water pump has a filter on it. Could look like window screen or similar. Junk in that will fill up with pressure and cut the water off. If the pump stops running after a few seconds of flowing, its probably a filter. Once they get to a certain pressure, water valve opened or closed, they shut off to keep from burning up. If the water tank was left with some water in it, moss may have grown. Should flush it with some clorox and water. Check with a local dealer to see how much.
Q:I am wanting a water pump for the basement for when the electricity is off. What do you recommend?
There okorder.com... They are typically installed as back up to the electric powered one and will only come on when the electric has failed. they use a siphon action that is supplied by water flowing through a pipe so they use a lot of water but as long as your house has water pressure they will keep the basement dry. When the electricity comes back on they shut off because their float switch is activated at a higher level that the electric ones.
Q:When did the pump start?
The promotion of water is very important to human life and production. There are various ancient water appliances, such as Egypt's chain pump (seventeenth Century BC), China shadoof (seventeenth Century BC), Burton (Eleventh Century BC) and water (first Century ad). The famous spiral rods invented by Archimedes in the third Century BC can lift water to a few meters in a steady and continuous way, and the principle is still used by modern screw pumps.In 200 BC, the ancient Greek fire pump craftsmen invented by Kurt Siby Lucius is a kind of piston pump has the most original, the main components of a typical piston pump piston pump, but only after the steam engine was developed rapidly.1840~1850 years, the United States invented Worthington pump cylinder and steam cylinder opposite, the direct impact of the piston pump, marking the formation of modern piston pumps. Nineteenth Century was the climax of the development of piston pumps, which were already used in a variety of machines, such as water presses. However, with the rapid increase in water demand, from 1920s, the piston pumps with low speed and large flow were gradually replaced by high-speed centrifugal pumps and rotary pumps. But in the field of high pressure and small flow, reciprocating pump still occupies the main position, especially diaphragm pump and plunger pump have their own advantages and are used more and more.
Q:Is there a diagram that shows which bolts go where on a 2001 dodge dakota 3.9L V6 engine for the water pump?
There are 4 long bolts that go all the way through the pump and and timing cover into the engine block. The rest are shorter but all the same length which seal the pump to the timing cover. You cannot put them in the wrong holes. The 4 long bolts do screw into water passages though. What has probably happened is you neglected to put sealant on the threads of the 4 long bolts that go into the coolant passages. If you put those 4 bolts in without sealant the coolant can weep right past the threads even if the bolts are tight and leak. Remove just those bolts 1 at a time and coat the threads with RTV or gasket sealing compound and re-install them then pressure check the system. Best of Luck!
Q:Is The water pump working?
First let me say the GOOD LORD was watching over you. You NEVER NEVER NEVER open a radiator cap when it is hot. Had a friend do that and he now has scars on his chest where the water sculled him. Yes it is working. What you need to do is change the thermostat. But please wait until the engine is cool to the touch.
The company is always devote to innovation and management after founded more than 20 years. The company embarked on the road of a virtuous cycle and operating in scale. The company has professional pump design and developing technicians. And formed a manufacture management, quality management and marketing management system.

1. Manufacturer Overview

Location Zhejiang,China
Year Established 1991
Annual Output Value Above US$100 Million
Main Markets 10.00% Northern Europe
10.00% Western Europe
10.00% Eastern Asia
10.00% Mid East
10.00% Oceania
10.00% Africa
10.00% Southeast Asia
10.00% Eastern Europe
10.00% South America
5.00% Central America
5.00% North America
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Shanghai,Ningbo
Export Percentage 31% - 40%
No.of Employees in Trade Department English, Chinese
Language Spoken: 11-20 People
b)Factory Information  
Factory Size: 50,000-100,000 square meters
No. of Production Lines Above 10
Contract Manufacturing Design Service Offered Buyer Label Offered
Product Price Range Low and/or Average