BCEG-200 Insulation Material for Oven Use Aerogel Insulation Felt

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m²
Supply Capability:
10000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


Aerogel Insulation Felts

Using special nanotechnology, It combines a silica aerogel with reinforcing fibers to deliver very low thermal conductivity, low density and good flexibility in an environmentally safe product. It provides excellent properties of waterproof, sound absorption and shock absorption. It is an alternative to the common, environment unfriendly, inferior insulation products, such as PU, asbestos insulation felt, silicate fibers, etc.



1.Superior Thermal Performance 
2.Long service life 
3.Environmentally Safe 
4.Sound resistance


 3. Advantages

(1).Superior Thermal Performance

The maximum use temperature is 1000,Its thermal conductivity is 1/3~1/5 of common insulators, helping reduce heat loss and optimizing space utility.

(2). Long service life

Unlike other traditional insulation materials, aerogel ’s three- dimensional, structure inhibits sintering warpage, and particles stack which may occur under hot temperature for long time. Therefore, aerogel insulation has long service life. 

(3). Physically Robust:
It has flexibility and high tensile strength, resisting stretching and stress from linear contraction when temperature changes.

(4). Environmentally Safe:
Composed of inorganic materials, it contains no hazard. Stripping little chloridionm will cause no corrosion to the equipments and pipes.

Low and ultra-low temperature equipment and piping applications

Petrochemical, power equipment applications

(5). Easy to Install
Extremely low density (200kg/m3) contributes to easy-to-cut and easy-to-install.


4. Technical Standard



Techicial   Standard



A   Grade



<220< span="">





Thermal   Conductivity













5. Application

Oil pipe, steam pipe, refrigerator interlining, oil tank, central airconditioning pipe, chemical pipe with the requirement of fire resistance, vehicle thermal insulation, national defence, military industry, heat supply pipelines in city insulation, biological medicine pipes and equipment and so on.

BCEG-200 Insulation Material for Oven Use Aerogel Insulation Felt

BCEG-200 Insulation Material for Oven Use Aerogel Insulation Felt

BCEG-200 Insulation Material for Oven Use Aerogel Insulation Felt

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The glass wool board of Kunnai Building Materials Corporation have different densities. Are there any differences?
Of course there are differences on attrition rate, and this is the same as rock wool. This will affect the schedule, especially will add construction difficulty. They are all inorganic materials, but the thermal insulation perfoamance is poor. I have accepted such a project in which the boards are of different density and there are big differences on their thermal insulation and fireproof performance. And I will not accept such project any more.
Q:What are the differences between glass wool felts and rock wool board in terms of appearance, and how to distinguish them?
First, the color. environmental glass wool is while, while rock wool is dark.
Q:What's the types of glass wool points? do they have the same sound insulation effect?
Rock wool and glass wool have poor sound insulation effect, and different prices, glass wool is easy for construction.
Q:If rock wool board and glass wool are used in enclosed stone curtain walls, which one is better?
1. Glass wool has a lower thermal conductivity than rock wool, and glass wool keeps about about 650 in melting crunode; firewall behind the glass curtain wall mainly use rock wool with a volume-weight of 60 to 64, and its melting crunode is about 1200.
Q:How to construct when apply rock wool board to glass curtain wall?
Basic interface treatment: The wall should be cleaned off grease and floating ash, etc. The loose and weathering part should be removed. If the protrusions on the surface of the wall is greater than 10mm, it should be removed. In order to make the adhesion of the base interface unified and homogeneous, the wall needs interface processing. An injection gun or brush can be used to evenly coat mortar to ensure that all the walls have been treated. Before interface processing, bricks and aerated concrete walls needs watering to wet it. When blocking scaffold eyes and abandoned holes, first clean the debris, dust, etc. and then wet it, and then use cement and mortar at a proportion of 1: 3 to fill the holes tightly. 2, Suspend vertical line and the controlling line: The method of laying lines should be determined according to the height of the building. Using the theodolite to look for the verticality making use of corners of doors and both sides of windows. Stretch low carbon steel wire to find the rules, and the horizonal line can be controled crossly based on the 500mm lines as the datum line which is higher than the building. According to vertical flux lines and insulation thickness, flip the control line on both sides of the angles of each horizonal spacing between purlins, and then draw the horizonal flux line as the mark. 3, Installation of rock wool boards: (Box bonding method and achorage of expanded anchor bolts)
Q:What are the industry standards of glass wool and its products?
The industry standards of glass wool and its products GB / T 13350-2000. The standards specifies classification, requirements, testing methods, inspection rules, marking, labeling, packaging, transportation and storage of glass wool for thermal insulation and its products. It also give the conversion of thermal resistance and thermal conductivity coefficient. This standard applies to insulating glass wool, glass wool board, glass wool band, glass wool blanket, glass wool felt and glass wool tube.
Q:Does anyone know about the general unit weight of glass cotton color steel plate?
Glass cotton in the market is generally 16kg / m³ to 64kg / m³. I have also heard about glass cotton with high unit weight, but the higher the unit weight is, the higher the production requirements are, and the boards are more fragile. Glass cotton are manufactured to meet the requirement of large-area pave, apart from the unique thermal insulation property, they are good at fireproofing, shock and sound absorption.
Q:What is the difference between anti-high temperature glass wool and ordinary glass wool?
Difference: High-temperature glass wool is made up of glass fibers and special high-temperature adhesive. It is yellowish with curing agent as the high temperature adhesive and with a small quantity of glue. While ordinary glass wool is dark yellow with ordinary resin adhesive as the binder.
Q:How to increase soundproof performance of houses(with glass wool)?
Glass wool is not the best soundproofing products, the best products are rock wool boards, felts.
Q:Does anyone know about the filling materials in the steel stud, is it glass wool or mineral wool?
Glass wool is sound and thermal insulation materials with no rigidity, and is generally placed between two mineral wools. It is used when soundproofing requirements are relatively high. Mineral wool is commonly known as mineral wool board and generally with rigidity. Usually monolayer steel studs are filled with mineral wool boards which have advantages of sound and thermal insulation, fireproofness.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range