Bauxite/ Calcined Bauxite for Refractory Material of CNBM in China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
25 m.t.
Supply Capability:
12000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Bauxite/ Calcined Bauxite for Refractory Material of  CNBM in China


1.Structure of Calcined Bauxite Description

Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron.  From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle.  Very difficult to melt.  Insoluble in water,  soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material. 

 

2.Main Features of the Calcined Bauxite

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum

hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there. By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns. 

3.Main usage of the Calcined Bauxite

(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc. 
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department. 
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties. 
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries. 
(5)  in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects. 
(6)   manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.

 

4. Calcined Bauxite Images

 

Bauxite/ Calcined Bauxite for Refractory Material of  CNBM in China

Bauxite/ Calcined Bauxite for Refractory Material of  CNBM in China

5. Calcined Bauxite Specification

Al2O3

80%min

SiO2

14%max

Fe2O3

2.5%max

TiO2 

4.0%max

CaO+MgO

0.6%max

K2O+Na2O

0.3%max

B.D.

2.6g/ccm min.

Al2O3

85%min

SiO2

9%max

Fe2O3

2.0%max

TiO2 

4.0%max

CaO+MgO

0.6%max

K2O+Na2O

0.3%max

B.D.

3.10g/ccm min.

Al2O3

86%min

SiO2

8.5%max

Fe2O3

2.0%max

TiO2 

4.0%max

CaO+MgO

0.6%max

K2O+Na2O

0.4%max

B.D.

3.10g/ccm min.

Refractoriness:

1770°< Refractoriness< 2000°


Al2O3

87%min

SiO2

7%max



Fe2O3

2.0%max

TiO2 

4.0%max

K2O+Na2O

0.6%max



B.D.

3.0-3.10g/ccm 

H2O

0.5%max (excess to be deducted from the invoice weight)

NO.

Size

Size Distribution

Quantity(MT)

Price( FOB Tianjing)

1

0-1mm

0-0.5mm 60%max



2

1-3mm

90% min



3

3-5mm

90% min




Total (MT)




Packing:

In 1MT big bag with bottom spout

Shipment:

TBN

Destination:

TBN

Validity:  

15 days




 

6.FAQ of Calcined Bauxite

1). Q: Are you a factory or trading company?

A: We are a factory.

2). Q: Where is your factory located? How can I visit there?

A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!

3). Q: How can I get some samples?

A: Please connect me for samples

4). Q: Can the price be cheaper?

A: Of course, you will be offered a good discount for big amount.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Does anyone know what kind of light fireproof materials are there?
二, 1, Gypsum plaster board With the building plaster as main raw material, gypsum plaster board is a kind of processed plate made by a special board for protective with an addition of additives and fibers as board core. Gypsum plaster board is characterized by light weight, sound insulation, heat insulation, strong processing performance and simple construction method. 2, Gypsum block Gypsum block is a kind of lightweight building gypsum product which is mainly made of building gypsum, and by adding water, stirring, casting and drying. During the process, , the fiber reinforced materials or light aggregates are allowed in, and the foaming agent can also be added. It has many advantages, such as sound insulation and fire prevention, convenient construction and so on. It is a kind of new and healthy wall material which produces low carbon, enhances environmental protection, and caters to the the times. 3, Fly ash brick is a new type of wall material, and bulk density is one of the main technical indexes. The weight of bulk density can be controlled according to the need of construction and adjustment of technical formula. The dry bulk density of the fly ash brick is about 1540 to 1640 kg / m 3, slightly lighter than the clay brick (1601800 kg /m 3). The flexural and compressive strength of fly ash brick is mainly determined by the production process, the formula and the hydrothermal synthesis reaction mode as well as the need of construction. According to the standards of architectural material industry (JC239 - 2001) released by People's Republic of China, the average value of the flexural strength is 2.5 ~ 6.2Mpa, compressive strength is between 10 ~ 30Mpa. I hope this will be helpful to you
Q:What is the common inorganic fireproof and thermal inuslation matertial?
Ceramic foam insulation board is made from clay tailings, ceramic broken flake and river silt, which is the closed ceramics material with high porosity roasted in high temperature by advanced production technology and foam technology. Products have fire retardant, small deformation coefficient, aging resistance, stable performance, good environmental protection, good compatibility between wall base and plastering layer, good safety and soundness and a lifetime as long as the building itself.
Q:Does anyone know the characteristics of refractory for glass kiln?
The characteristics of refractory for glass kiln: First, it can well resist the erosion of glass fusant and gas actor, and has sufficiently high load softening temperature and thermal stability. Usually we hope the refractories of all parts of the furnace will has no partial early erosion phenomenon to ensure that the entire furnace has a sufficiently long service life. However, due to the different mechanical, physical and chemical conditions of different parts of glass furnace, the performance of refractories should adapt to the glass furnace thereto and at the same time has no adverse effect on the adjacent other kinds of brick materials. Besides, we should consider the price of brick material, we should try to consider using commonly used stereotypes bricks of standard sizes which is cheap and quickly supplied by the warehouse. The damage of glass melting furnace lining is mainly due to chemical erosion, assisted by thermal stress. The degree and speed of chemical erosion is closely related to the applied parts, furnace temperature and melting glass varieties, and of course, the quality of the lining itself is also crucial. The nature of refractories using in the glass furnace has a very significant impact on the operation of glass melting furnace and the quality of glass. The application of poor main beam refractories will not only cause frequent shutdown for maintenance, limiting melting temperature, lowering furnace output, but also shorten the life of the furnace, and make glass has a variety of defects (stripes, stones, etc.), lower the quality of the glass. Here are the description of the nature and purpose of commonly used refractory in glass furnace.
Q:How can refractory material of the electric furnace be used for longer.
Minimize mechanical shock, Electrical furnace commonly referred to must be electrical arc furance. The wall of electric arc furnace should be constrcuted with magnesite carbon brick. Its hearth permanent layer should be constrcuted with mansornary magnesia brick. High alumina brick is usually used to aviod furnace cover suddenly get hot and cold. But its service life is lower. At present integral casting furnace cover is made of alumina magnesia. Terminal will be created even without the use of refractory material. Consumption is much faster if using refractories material or whole knottiing mainly.
Q:What is the main material of fireproof wooden door?
Fireproof wooden door has a lot of materials! including imported timber decorative effects: utilizing the diversity and easiness to cut of the timber, with all the decorative characteristics of the timber. Material selection features, door frames: Using high-quality hardwood, such as imported miscellaneous wood, camphorwood, lauan, hemlock, etc., insetting fire and smoke proof adhesive tape
Q:What's the heat conductivity coefficient of fire-resistant material?
The heat conductivity coefficient of fire resistant material is related to bulk density and mainly related to the internal structure. Different materials have different structure and thermal conductivity and temperature . Carbonaceous material can be used for heat dissipation and reach more than 15. For thermal insulation it can be 0.00.
Q:What is the new fireproofing standard of external wall thermal insulation materials?
The new national standard "Fireproof  Specification of Building Design" (GB50016-2014) has been issued, it will be carried out from May 1, 2015. Compared with "Fireproof  Specification of Building Design" GB 50016-2006 and "fire safety rules of tall buildings design" GB 50045-95 (2005 edition), the major changes of new standard is the following: 1. It has combined with "Fireproof  Specification of Building Design" and "Fireproof  Specification of Tall Buildings Design", and has adjusted incompatible requirements between two standards, and has unified the classification of residential buildings in accordance with the building height; 2. It has increased two chapters including the fire-fighting rescue facilities and wooden structures, and has improved the requirements for fire fighting and rescue, and standardized the fireproofing requirements of wood construction; 3. Additional requirements for the fireproofing requirements of building external insulation system; 4. The fire-fighting equipment is written in a separate chapter and improve relevant contents; cancel the design requirements of fire water supply system and smoke control system, and they are regulated by the relevant national standards; 5. appropriate increase in the high-rise residential buildings and fireproofing technical requirements for high-rise civil building whose height is greater than 100m; 6. add the fireproofing requirements used by covered pedestrian during evacuation; adjust and add designers density of construction materials, furniture, lighting shops and exhibition hall; 7. add the fireproofing requirements of underground warehouses, logistics buildings, large combustible gas tank (zone), ammonia storage tanks, LNG storage tank, and adjust the fire separation distance of liquid oxygen tank; 8. improve the relevant requirements to prevent vertical or horizontal spread of building fire.
Q:Can the teflon material resist fire?
Teflon does not burn and with the ability of flame retardant.
Q:Who knows the fire rating of fire partition with steel stud?
Cement board wall of steel stud: it is used for walls with ceramic in kitchens, restroom, disinfect room, etc. If single-sided tile is made, cement pressure plate can be used on one side. Gypsum board is used on the other side. Fire rating is A1. CaSo4.2H2O is molecular structural formula of gypsum which contains 20% water, crystal water and free water. When 10% water slowly evaporates on the flame surface, there is still 10% crystal water. Itself is grade A fire retardant material. 1 hour. It is in line with the fireproof test standard of national building materials. It can reach up to 4 hours at most.
Q:What are the fire endurance requirements of class A fire resistant door ?
Fire endurance of class A fire resistant door is 1.5h. According to the latest fire door requirements, in FMA FMB FMC three forms, A, B and C represent categories, such as FMA on behalf of Class A fire doors (ie thermal insulation fireproof door). Fire endurances of class A,B and C fire doors are 0.5 1.0 1.5 2.0 3.0. Therefore, the fire resistance of fire door needs to be designed and the design paper will make it clear in general.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range