Battery four wheel forklift FE4F16 18 DC

Ref Price:
$5,000.00 - 8,000.00 / unit
Loading Port:
Payment Terms:
TT or LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Forklift Description:

Automatic transmission with high efficiency and productivity;
Combined axles with minimum turning radius and aisle width;
Low energy consumption, high stability, maximum visibility;
Minimum noise and pollution
Wide-version mast with ergonomic design for high working efficiency.

The Battery-powered is our newly invented battery powered forkLift. It has a high visibility range , has an automatic transmission, it easy to operate and easy to charge. Both AC powered and DC powered models are available. It is an ideal machine for conveying product

Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.


An important aspect of forklift operation is that most have rear-wheel steering. While this increases maneuverability in tight cornering situations, it differs from a driver’s traditional experience with other wheeled vehicles. While steering, as there is no caster action, it is unnecessary to apply steering force to maintain a constant rate of turn.


Another critical characteristic of the forklift is its instability. The forklift and load must be considered a unit with a continually varying center of gravity with every movement of the load. A forklift must never negotiate a turn at speed with a raised load, where centrifugal and gravitational forces may combine to cause a disastrous tip-over accident. The forklift are designed with a load limit for the forks which is decreased with fork elevation and undercutting of the load (i.e., when a load does not butt against the fork "L"). A loading plate for loading reference is usually located on the forklift. A forklift should not be used as a personnel lift without the fitting of specific safety equipment, such as a "cherry picker" or "cage".

Forklift Specification:

1KG=2.2LB 1INCH=25.4MM

Mast Table FE4F16-18(DC)Capacity table(kg) c=500mm
Extended mast
Tilt forward/
without sideshift
full free

1.2Manufacturer’s type designation
1.3Drive:electric(battery or mains),diesel, petrol gas,manual
1.4Type of operation:hand,seated,pedestrian,
standing, order-picker

1.5Load Capacity /rated loadQ (kg)16001750
1.6Load center distanceC(mm)500500
1.8Load distance, centre of drive axle to forkX(mm)410410
Weights2.1Service Weight incl.battery(see line 6.5)Kg29963076
2.2Axle loading, laden front/rearKg3996/5004356/520
2.3Axle loading, unladen front/rearKg1196/18001220/1856
3.1Tyres:solid rubber,superelastic,pneumatic,

3.2Tyres size, front
3.3Tyres size, rear
3.5Wheels, number front/rear(x=driven wheels)
3.6Track width,frontb10(mm)890890
3.7Track width,rearb11(mm)920920
4.1Mast/fork carriage tilt forward/backwardα/β(¡ã)6/126/12
4.2Lowered mast heighth1(mm)19951995
4.3Free lifth2(mm)150150
4.4Lift heighth3(mm)30003000
4.5Extended mast heighth4(mm)39233923
4.7Overhead load guard heighth6(mm)21102110
4.8Seat height/standing heighth7(mm)10601060
4.12Coupling heighth10(mm)350350
4.19Overall lengthl1(mm)31603160
4.2Length to face of forksl2(mm)20102010
4.21Overall widthb1/b2(mm)10701070
4.22Fork dimensionss/e/l(mm)35x100x95035x100x950
4.24Fork carriage widthb3(mm)920920
4.31Ground clearance,laden, under mastm1(mm)6060
4.32Ground clearance, center of wheelbasem2(mm)130130
4.33Aisle width for pallets 1000x1200 crosswaysAst(mm)35253525
4.34Aisle width for pallets 800x1200 lengthwaysAst(mm)37253725
4.35Turning radiusWa(mm)19001900
4.36Smallest pivot point distanceb13(mm)566566
5.1Travel Speed, laden/unladenkm/h13/1412.5/14
5.2Lift speed, laden/unladenm/s0.27/0.370.25/0.37
5.3Lowering speed, laden/unladenm/s0.35/0.420.33/0.42
5.5Drawbar pull, laden/unladen S2 60minN1900/18301930/1870
5.6Max.drawbar pull,laden/unladen S2 5minN5750/55605760/5580
5.7Gradient performance, laden/unladen S2 30min%6/95.5/8.5
5.8Max.gradient performance, laden/unladen S2
5.1Service brake
E-Motor6.1Drive motor rating s2 60minkw55
6.2Lift motor rating at s3 15%kw7.57.5
6.3Battery acc. To DIN43531/35/36A,B,C,no
6.4Battery voltage, norminal capacity K5V/Ah48/40048/400
6.5Battery weightkg650650

Battery dimensions l/w/hmm970/600/438970/600/438
8.1Type of drive control
Mosfet Impulse/AC
8.2Operating pressure for attachmentsbar14.514.5
8.3Oil volume for attachmentsl/min3030
8.4Sound level at driver’s ear according to EN12053dB(A)7070

Forklift Images:

Battery four wheel forklift FE4F16 18 DC

Battery four wheel forklift FE4F16 18 DC

Battery four wheel forklift FE4F16 18 DC

FAQ of forklift:

Q: What’s the function of forklift?

A: A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances. The forklift was developed in the early 20th century by various companies including the transmission manufacturing company Clark and the hoist company Yale & Towne Manufacturing. Following World War II the use and development of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing operations.


Q: What’s the general operations of forklift:

A: Forklift cab with control layout.

Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.


Q: What are the Forklift safety Standards?

A: 1, Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.  

2, Other forklift safety standards have been implemented in the United States by the Occupational Safety and Health Administration (OSHA) and in the United Kingdom by the Health and Safety Executive.

3, Driver safety: In many countries forklift truck operators must be trained and certified to operate forklift trucks. Certification may be required for each individual class of lift that an operator would use.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to check the driver's license?
1 purpose! C $c) k + k; F. y (j $J3] r2 to % 1 D, C ^ 5 g# motor vehicle management, in order to improve the factory better ensure that each member of the club forklift driving safety, reduce the forklift accidents. "4 C * v. 5 w3 Z6 } s3 define 'L & n (y# m +]) b# K + _ # O external driving license: refers to the issued by the labor department of motor vehicle driving license.. P6 V; Z6 j + @ X internal certificate: issued by the engineering department of motor vehicle driving license. /? * T $V: m' Z based total score: of club forklift drivers and before receiving the factory inside the driver's license issued by the internal exam grades (refers to the theory of achievement). / g0 ~ '], F2 P (K2 y new forklift driver: refers to has been in the factory the motor vehicle driving license issued by the department of labor, and through the examination has been made a motor vehicle driving license within 6 months of employees in the company.
Q:What is the difference between a forklift and a trailer for a hydraulic drive?
The so-called hydraulic drive is the idea of automatic stop, which is not disconnecting, only the throttle and the brakes. The rocker, which moves forward and backward, is usually positioned at the wheel. As for leaning and lifting, you can go to the scene and pretend to be a professional
Q:The width of the forklift truck aisle should be left over
It depends on several aspects: 1 tray size, especially in the x direction, because it directly affects the fork teeth and selection of forklift and forklift selection. 2 according to the result of forklift truck selection can get his right Angle stacking radius. 3 according to the amount of space between beams or consider span beam length across (if any), calculated the length of the tray out * 24 security tray width, and then combined with forklift rectangular storage minimum value, then add a safe width is ok
Q:Is a forklift a special type of work
Hello, forklift driver belongs to special equipment operator, not belong to special type of work.
Q:What needs to be paid for forklift?
Take a look at the performance parameters of forklift, and choose the right forklift for your own needs, raising the height, and the tonnage is two important parameters! The operation of forklift is not difficult, the training is completely unnecessary, if it is not driving, you can choose the hydraulic car, the operation is simple, no clutch control!
Q:What is the procedure of the forklift?
The registration form of the special equipment (two copies of the original); The inspection report (original and copy) of the inspection (or periodical) in the validity period; Certificate of special equipment (original and photocopy); Product quality certificate (original and photocopy). Note: all copies need to be covered with the official seal.
Q:What certificate is required to train the forklift
You will drive a forklift to register for the certificate. Will not still go to zhongshan's dongfeng town, zhongshan real kung fu professional forklift training to study and test.
Q:People leave the forklift and do what and what to pay attention to when parking
Before leaving the forklift, remove the cargo fork completely, hold the hand brake and remove the key of the switch. Press the emergency isolation switch. If you park the forklift on a slope, you must plug the wheels.
Q:What is the section 4 and 3
The bureau of quality and technical supervision issued a certificate of operation, commonly known as a forklift driver qualification certificate. Second, the labor bureau is forklift certificate of technical level, is divided into five levels: primary (green magnitude), intermediate (level 4) blue, senior level 3 (red) technician (brown) 2 senior technician (level 1).
Q:The operation procedure of forklift truck
(3) the driving (1) when driving, the bottom of the fork should be kept at 300 to 400mm and the door frame will be tilted back. Do not raise the fork too high when driving. When traveling in or out of the job, pay attention to whether there are any obstacles to be touched. When driving, if the fork rises too high, it also increases the overall height of the forklift truck, affecting the stability of the forklift truck. (3) after unloading, the cargo fork should be landed before moving again after the normal driving position. (4) when turning, if there are pedestrians or vehicles nearby, they should send a signal and stop the fast turning. A sharp turn can cause the vehicle to lose its horizontal stability and tilt. (5) the internal combustion forklift truck is strictly prohibited from coasting while downhill. (6) in the case of special circumstances, it is forbidden to brake on the carriage.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range