Battery Four Wheel Forklift FE4F16/18(AC)
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Forklift Description:
Automatic transmission with high efficiency and productivity;
Combined axles with minimum turning radius and aisle width;
Low energy consumption, high stability, maximum visibility;
Minimum noise and pollution
Wide-version mast with ergonomic design for high working efficiency.
The Battery-powered is our newly invented battery powered forkLift. It has a high visibility range , has an automatic transmission, it easy to operate and easy to charge. Both AC powered and DC powered models are available. It is an ideal machine for conveying product
Forklift Specification:
Designation | Lift height | Free lif | Closed mast | Extended mast height | Tilt forward/ backward | without sideshift | |
h3mm | h2mm | h1mm | h4mm | α/β(°) | FE4F16AC | FE4F18AC | |
two-stage | 2500 | 150 | 1745 | 3423 | 6/12 | 1600 | 1750 |
2700 | 150 | 1845 | 3623 | 6/12 | 1600 | 1750 | |
3000 | 150 | 1995 | 3923 | 6/12 | 1600 | 1750 | |
3300 | 150 | 2145 | 4223 | 6/12 | 1600 | 1750 | |
3600 | 150 | 2345 | 4523 | 6/6 | 1400 | 1450 | |
4000 | 150 | 2545 | 4923 | 6/6 | 1300 | 1330 | |
4300 | 150 | 2695 | 5223 | 6/6 | 1200 | 1200 | |
4500 | 150 | 2795 | 5423 | 6/6 | 1100 | 1100 | |
two-stage full free | 2500 | 1200 | 1735 | 3423 | 6/12 | 1600 | 1750 |
2700 | 1300 | 1835 | 3623 | 6/12 | 1600 | 1750 | |
3000 | 1500 | 1995 | 3923 | 6/12 | 1600 | 1750 | |
3300 | 1700 | 2135 | 4223 | 6/12 | 1600 | 1750 | |
3600 | 1800 | 2335 | 4523 | 6/6 | 1400 | 1450 | |
4000 | 2054 | 2585 | 4923 | 6/6 | 1300 | 1330 | |
three-stage | 4000 | 1300 | 1930 | 4923 | 6/6 | 1250 | 1280 |
4300 | 1400 | 2030 | 5223 | 6/6 | 1200 | 1220 | |
4500 | 1500 | 2080 | 5423 | 6/6 | 1150 | 1150 | |
4800 | 1690 | 2180 | 5723 | 3/6 | 1050 | 1050 | |
5000 | 1800 | 2215 | 5923 | 3/6 | 750 | 800 | |
5500 | 1850 | 2445 | 6423 | 3/6 | 500 | 550 | |
6000 | 2000 | 2615 | 6923 | 3/6 | 350 | 400 |
Identifica tion | 1.1 | Manufacture(abbreviation) | unit | Noblelift | Noblelift |
1.2 | Manufacturer’s type designation | FE4F16AC | FE4F18AC | ||
1.3 | Drive:electric(battery or mains),diesel, petrol gas,manual | electric | electric | ||
1.4 | Type of operation:hand,seated,pedestrian, standing, order-picker | seated | seated | ||
1.5 | Load Capacity /rated load | Q (kg) | 1600 | 1750 | |
1.6 | Load center distance | C(mm) | 500 | 500 | |
1.8 | Load distance, centre of drive axle to fork | X(mm) | 410 | 410 | |
1.9 | Wheelbase | y(mm) | 1250 | 1250 | |
Weights | 2.1 | Service Weight incl.battery(see line 6.5) | Kg | 3006 | 3086 |
2.2 | Axle loading, laden front/rear | Kg | 4004/502 | 4364/522 | |
2.3 | Axle loading, unladen front/rear | Kg | 1200/1806 | 1224/1862 | |
Wheels, Chassis | 3.1 | Tyres:solid rubber,superelastic,pneumatic, polyurethane | Pneumatic | Pneumatic | |
3.2 | Tyres size, front | 6.50-10-10PR | 6.50-10-10PR | ||
3.3 | Tyres size, rear | 5.00-8-8PR | 5.00-8-8PR | ||
3.5 | Wheels, number front/rear(x=driven wheels) | 2x/2 | 2x/2 | ||
3.6 | Track width,front | b10(mm) | 890 | 890 | |
3.7 | Track width,rear | b11(mm) | 920 | 920 | |
Basic Dimensions | 4.1 | Mast/fork carriage tilt forward/backward | α/β(¡ã) | 6/12 | 6/12 |
4.2 | Lowered mast height | h1(mm) | 1995 | 1995 | |
4.3 | Free lift | h2(mm) | 150 | 150 | |
4.4 | Lift height | h3(mm) | 3000 | 3000 | |
4.5 | Extended mast height | h4(mm) | 3923 | 3923 | |
4.7 | Overhead load guard height | h6(mm) | 2110 | 2110 | |
4.8 | Seat height/standing height | h7(mm) | 1060 | 1060 | |
4.12 | Coupling height | h10(mm) | 350 | 350 | |
4.19 | Overall length | l1(mm) | 3160 | 3160 | |
4.2 | Length to face of forks | l2(mm) | 2010 | 2010 | |
4.21 | Overall width | b1/b2(mm) | 1070 | 1070 | |
4.22 | Fork dimensions | s/e/l(mm) | 35x100x950 | 35x100x950 | |
4.24 | Fork carriage width | b3(mm) | 920 | 920 | |
4.31 | Ground clearance,laden, under mast | m1(mm) | 60 | 60 | |
4.32 | Ground clearance, center of wheelbase | m2(mm) | 130 | 130 | |
4.33 | Aisle width for pallets 1000x1200 crossways | Ast(mm) | 3525 | 3525 | |
4.34 | Aisle width for pallets 800x1200 lengthways | Ast(mm) | 3725 | 3725 | |
4.35 | Turning radius | Wa(mm) | 1900 | 1900 | |
4.36 | Smallest pivot point distance | b13(mm) | 566 | 566 | |
Performan ce | 5.1 | Travel Speed, laden/unladen | km/h | 13/15 | 13/15 |
5.2 | Lift speed, laden/unladen | m/s | 0.27/0.37 | 0.25/0.37 | |
5.3 | Lowering speed, laden/unladen | m/s | 0.35/0.42 | 0.33/0.42 | |
5.5 | Drawbar pull, laden/unladen S2 60min | N | 1900/1830 | 1930/1870 | |
5.6 | Max.drawbar pull,laden/unladen S2 5min | N | 5750/5560 | 5760/5580 | |
5.7 | Gradient performance, laden/unladen S2 30min | % | 6/9 | 5.5/8.5 | |
5.8 | Max.gradient performance, laden/unladen S2 5min | % | 10/18 | 9.5/17 | |
5.1 | Service brake | hydr. | hydr. | ||
E-Motor | 6.1 | Drive motor rating s2 60min | kw | 8 | 8 |
6.2 | Lift motor rating at s3 15% | kw | 7.5 | 7.5 | |
6.3 | Battery acc. To DIN43531/35/36A,B,C,no | BS | BS | ||
6.4 | Battery voltage, norminal capacity K5 | V/Ah | 48/400 | 48/400 | |
6.5 | Battery weight | kg | 650 | 650 | |
Battery dimensions l/w/h | mm | 970/600/438 | 970/600/438 | ||
Other Details | 8.1 | Type of drive control | Mosfet Impulse/AC | ||
8.2 | Operating pressure for attachments | bar | 14.5 | 14.5 | |
8.3 | Oil volume for attachments | l/min | 30 | 30 | |
8.4 | Sound level at driver’s ear according to EN12053 | dB(A) | 70 | 70 |
Forklift Images:
FAQ of forklift:
Q: What’s the function of forklift?
A: A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances. The forklift was developed in the early 20th century by various companies including the transmission manufacturing company Clark and the hoist company Yale & Towne Manufacturing. Following World War II the use and development of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing operations.
Q: What’s the general operations of forklift:
A: Forklift cab with control layout.
Forklifts are rated for loads at a specified maximum weight and a specified forward center of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate without the permission of the forklift manufacturer.
Q: What are the Forklift safety Standards?
A: 1, Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.
2, Other forklift safety standards have been implemented in the United States by the Occupational Safety and Health Administration (OSHA) and in the United Kingdom by the Health and Safety Executive.
3, Driver safety: In many countries forklift truck operators must be trained and certified to operate forklift trucks. Certification may be required for each individual class of lift that an operator would use.
- Q:What is the cause of my forklift
- There are a lot of reasons why you can't start, and the owner doesn't say whether it's an internal combustion fork or a forklift truck.
- Q:How does flexsim implement a forklift truck to move the product to the shelf
- Press the A button to click the staging area, hold down the mouse button, drag it to the shelf, and release the mouse button on the shelf. This completes the A connection.
- Q:The width of the forklift truck aisle should be left over.
- It depends on several aspects: 1 tray size, especially in the x direction, because it directly affects the fork teeth and selection of forklift and forklift selection. 2 according to the result of forklift truck selection can get his right Angle stacking radius. 3 according to the amount of space between beams or consider span beam length across (if any), calculated the length of the tray out * 24 security tray width, and then combined with forklift rectangular storage minimum value, then add a safe width is ok
- Q:What type of work is the forklift worker in the new labor law
- Multiple labor relations due to the labor contract law acknowledged in this concept, so the labor relationship is weakened, as long as the original unit will your affiliated to the labor contract the legal procedure, you should be and the labor service company to sign labor contract, the labor service company with your former unit labor dispatching agreement, you have no relationship with the original state-owned enterprises, they're just burden you overtime, security protection and training support.
- Q:After the forklift is killed, it will stall!
- Improper operation, it is ok to follow these steps: forklift safety operation procedures (a), check the vehicle 1. Forklift truck before and after operation, should check the appearance, loaded with fuel, lubricating oil and cooling water. Check for starting, running and braking performance. Check the lighting and sound signal to be fully available. The forklift should check the pressure and the temperature is normal. The forklift should also check the leak and replace the sealing parts in time. (2) starting from the beginning, before starting, after observing the perimeter, confirming that there are no barriers to the safety of the road, the first start of the whistle. The vehicle of pneumatic brake, the reading of the brake barometer must reach the specified value before starting. The driver of a forklift should first confirm the steady and reliable delivery of the cargo. The safety operating procedure of forklift truck (1), check the vehicle 1. Before and after the forklift truck, should inspect the appearance, add the fuel, the lubricating oil and the cooling water. Check for starting, running and braking performance. Check the lighting and sound signal to be fully available. The forklift should check the pressure and the temperature is normal. The forklift should also check the leak and replace the sealing parts in time. (2) starting from the beginning, before starting, after observing the perimeter, confirming that there are no barriers to the safety of the road, the first start of the whistle. The vehicle of pneumatic brake, the reading of the brake barometer must reach the specified value before starting.
- Q:What is the responsibility of the forklift driver for the job?
- Legal basis: 1) "tort liability law" article 34 the employer's personnel for task execution causes damage to others, by unit of choose and employ persons assume tort liability. In the period of labor dispatch, the dispatched staff shall be responsible for the infringement of the persons who have caused the injury to other people because of the performance of the work. If the dispatching unit is at fault, it shall bear the corresponding supplementary responsibility. 2) the tort liability law article 35 a labor relationship formed between individuals, providing labor services side because Labour causes damage to others, by the accept labor party bear tort liability. Where the provision of a labor party is compromised by the labor service itself, the corresponding liability shall be borne according to the respective fault of the two parties.
- Q:Where are the advantages and disadvantages of a battery lifter and a diesel forklift
- Working parts of 3. The work part is the direct work of the forklift truck for loading and unloading, which is grouped by the following sections: (1) the tools of withdrawal. It is a variety of work items which are represented by the cargo fork, which is used to fork, pick and shovel the goods. (2) lifting shelves. To install the cargo fork or other work item, and drag the goods up and down. (3) the door frame. It is the skeleton of the work unit, and most of the zero parts of the work unit are installed on the door shelf. The two-section door frame consists of the outer door frame and the inner door frame of the lower lift. The three-section door frame consists of three doors, internal, medium and outer. (4) the leaning mechanism of the door frame. The reclining of the door frame is made up of inclined oil cylinders. (5) the lifting mechanism. Drag and drop power plant and traction gear. It is composed mainly of sprocket, chain and lifting cylinder. (6) hydraulic control system. It is a combination of the lifting of the cargo and the tilt of the door frame and the other actions performed by the hydraulic system. It consists of hydraulic components, pipes and manipulators
- Q:Learn the forklift truck, will you be tired in the future?
- Hello, the original poster can glad to reply for you I am the forklift worker get in March 2014 the ministry of construction of the forklift license Then apply for many recruiters say the local families don't admit I'm in the middle of April (April 2015) to enter oneself for an examination a pledges inspect bureau forklift license I like all kinds of car I have C1 driver's license To take an examination of a forklift license Although the job is not as high treatment as civil servants Don't like IT industry technician high-tech But it is also a live technical Ha ha Happiness consists in contentment I wish you a happy work Forklift worker I feel not tired After all, it's the brain is to drive tired attention I am in logistics warehouse forklift I think can also may be young I have a study colleagues together She ratio I big a lot of running a forklift in the enterprise workshop wages in January three thousand In January two days off Went to work at 9 o 'clock every morning At noon to eat an hour Dry until five o 'clock in the afternoon very tired
- Q:How to check the driver's license?
- 1 purpose! C $c) k + k; F. y (j $J3] r2 to % 1 D, C ^ 5 g# motor vehicle management, in order to improve the factory better ensure that each member of the club forklift driving safety, reduce the forklift accidents. "4 C * v. 5 w3 Z6 } s3 define 'L & n (y# m +]) b# K + _ # O external driving license: refers to the issued by the labor department of motor vehicle driving license.. P6 V; Z6 j + @ X internal certificate: issued by the engineering department of motor vehicle driving license. /? * T $V: m' Z based total score: of club forklift drivers and before receiving the factory inside the driver's license issued by the internal exam grades (refers to the theory of achievement). / g0 ~ '], F2 P (K2 y new forklift driver: refers to has been in the factory the motor vehicle driving license issued by the department of labor, and through the examination has been made a motor vehicle driving license within 6 months of employees in the company.
- Q:How does the forklift start?
- Why is the front wheel of the forklift narrow.I hope my answer will help you.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Battery Four Wheel Forklift FE4F16/18(AC)
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords