automatic remote control woodengrain elegant sectional garage door
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 20000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
remote control wooden grain automatic garage door | |
Operation: | Manual, Automatic |
Construction: | Steel panel with PU foam inside 40mm thickness |
Surface texture: | Smooth ribbed exterior /wooden grain |
Hardware | 1.8-2.2mm galvanized steel which is sprayed powder as ur request |
Seals: | Perfect quadrilateral sealing as bottom seal/optional header seal/side seal |
Track Type: | Normal headroom/ low headroom |
color | white, golden oak, Walnut, Mahogany,brown, cream, and any other you like |
wooden grain automatic garage door Advantage
a,.new technology : non fade plate imported from Korea,the surface layer of it dopt latest nanotechnology,acid-resistant,antibacterial.maintain intrinsic color in any case.The core part of the door plate is filled with the polyurethane environmentalmaterial,adiabatic, insulative,heat retaining.
b,.Superb protection. the door will rebound automically when there sre barriers during falling,Not even children can get their fingers between the door panels.
c,.Solid construction:the door plate for steel sectional panel is 40mm thick,and with two reinforcing ribs with on the back of it. and 3mm to 5mm for polycarbonate sectional panel
d,.elegant appearance:The surface with the natural veins ,elegant white painting assorts with verious environmental color,make inner ray of garage be bright and tendernes.
e,.save space:only a very small part of the bottom panel of our door will hang down when the door is fullly open. even you have a really tall car ,don't worry it.
f,. Simple Assembly: The first door can be assembled using only one tool. This makes the assembly process smoother for the professional installer and makes life easier for those who nevertheless choose to do the assembly themselves.
g,. Different colour optional.
- Q:Aluminum alloy doors and windows wide width or high height
- Door and window size is generally wide by high
- Q:There are provisions in the specification! Metal shutter doors and security doors are all special doors!
- With metal doors and windows installed inspection lot, special door is fire, explosion, air defense doors and so on.
- Q:I am in the process of stripping the inside of my garage (into kitchen) door. It is metal, and has about 6 layers of paint that are coming off. I dont want to go through this again, so I need some pointers. First, can I use a latex paint? If so, semi-glossy, or high gloss? It previously had eggshell on it, and attracted SO much grime. I would prefer not to use oil-based paint unless absolutely necessary, as fumes can trigger seizures.
- 1) Remove Hardware and Weather Stripping 2) Remove Excess Window Glazing 3) Clean and Mask 4) Fix Dents, Sand and Prime then use a brush, roller or spray to paint the door good luck
- Q:How to clean the aluminum doors and windows
- Is it rubbing aluminum alloy or rubbing aluminum alloy doors and windows? If you can only wipe the aluminum alloy with a soft cloth, the glass can be wiped with gasoline or alcohol, if the rubbing of aluminum with rosin will damage the aluminum alloy coating.
- Q:If so, what is the best way to do that? What is the best type of paint to use on metal doors?
- Might want to consider washing the door with TSP (tri sodium phosphate) to etch the surface. Check this with the paint store.
- Q:I purchased metal spray paint for my front door. Besides cleaning, does it need to be primed? I have a interior waterbased primer sitting around, would that work? Or can I basically just clean the door, sand it and apply the spray without priming it? The current color is beige and Im spraying a hammered black. Thanks in advance.
- Metal Front Door
- Q:Aluminum alloy door and window frame and hole wall gap for how much, in the specification can be found
- Look at the surface material, the general coating is 5mm enough, if it is stone, you need 20-30 or even larger.
- Q:This is a metal framed glass swinging door with some miles. It has an adjustment screw which I cannot figure out. Right now the door does not want to close centered on the jam, but instead wants to finish 6 inches off center. Does anyone know how to adjust this kind of door?I cannot identify a brand name on the door anywhere.
- you have to back the adjustment screw out to allow the center pin to 'float freely ' then with the door in place lift up on it enough to twist the pin where you want it and retighten the set screw it is a trial and error process but really doesnt take long once you figure out how much you are having to compensate for on a couple tries
- Q:permanent mark on a metal white door.
- Rubbing alcohol does a good job at removing permanent marker off metal and plastic surfaces.
- Q:Our last home had a wooden garage door, so this is new territory for me. The paint on our metal garage door peeled off from the string of hurricanes we had a few years back (Im in east FL). Its now gotten to the point where every time it rains, a little bit more paint peels off. Ive been trying to do some research online, but Ive really only found bits and pieces of info that dont really help me. I was told that I dont need to prep the door because the paint will stick to the original door finish... but my door has exposed metal where there is no finish. What kind of prep work do I need to do? Does the door need to be stripped completely and sanded? How about primer and paint, what should I be looking for? HELP ME.
- clean the door very well and just lightly sand to prep for paint they sell a metal primer by rustoleum if its only small areas then you can by it in a spray can and hit those areas that are bare with a couple coats of the primer . if you dont have a sprayer and you want to brush it on then youre gonna want to do probably 3 thin coats never try to put too much paint on all at once and when you buy the finish paint buy the right solvent to thin the paint a little to be able to spread it on more evenly if you want to rent a sprayer or i would recommend a cup gun which is a small handheld sprayer that is hooked up to an air compressor and has a cup attached to the gun where the paint goes in.. hope this helps. Robby
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
automatic remote control woodengrain elegant sectional garage door
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 20000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
