|Safe working load||kg||340||230|
Maximum working height
|Maximum platform height||m||30||32|
|Maximum horizontal outreach||m||21.1||22.5|
|Turntable tailswing||axle furled||1.68|
|Vertical distance below the horizontal extensionlevel||m||1.98||3|
|Overall width||axle furled||2.49|
|Working platform size||m||2.4×0.9|
|Minimum ground clearance||m||0.32|
|Minimumturning radius||axle furled||4.01/6.75|
|Turntable rotation angle||ì||360∑|
|Platform swing angle||ì||160∑|
|Fore arm amplitude angle||ì||130∑(+70∑/-60∑)|
|Running speed(furling state)||furled||km/h||4.8|
|lift or extend||km/h||1.1|
|Maximum allowable angle during working||ì||5∑|
|Hydraulic oil tank||L||208|
|Tyre (solid tyre)||385/65 D22.5|
-Can bus line intelligent controller
-Platform weighing limit function (EN280 standard)
-Turntable 360° continuous rotary
-Automatically adjustable platform
-Electric circuit fault code display
-Hydraulic swing platform
-Restart the engine protection
-Driving motor overtemperature protection
-Euro Ⅲ emission standard engine
-Hydraulic electric welding machine
-Hydraulic air compressor
-Hydraulic high pressure water pump
-AC power source connected to platform
-Platform working lamp
-Hydraulic oil radiator
- Q:How do you remove the horizontal universal elevator milling cutter
- When the milling cutter is removed from the vertical milling machine, the lever nut must be released and then the end of the rod is gently tapped. ; You should not release too much, as long as you have some loose space. When you release too much, the thread connecting the rod and the milling cutter is too short, and when you tap, you slip and even drop the knife.
- Q:Introduction of vertical elevator milling machine
- Vertical knee-type milling machine is a general-purpose milling machine. Vertical milling machine by end milling cutter, end mill, cylindrical milling cutter, saw blade milling cutter, wafer cutter, end milling cutter, and various forming milling cutter for machining various parts.
- Q:Do you have a personal elevator with hydraulic platform
- You need to consider the beauty of the platform; Perhaps you can consider using hydraulic villa elevator, safety performance is high, when power failure or failure has self-rescue function.
- Q:The purpose of the rail elevator
- The product structure is strong, the load is large, the lift is stable, the installation maintenance is simple and convenient, is the economical and practical low floor space to replace the elevator's ideal cargo transport equipment. According to the installation environment and use requirements of lifting platform, choose different optional configuration, can achieve better effect, the use of this product is mainly used in chemical, high temperature and high pressure, power plant, the nuclear industry base, such as explosive explosion protection enterprise.
- Q:Is the elevator moving faster or slower?
- Speed of computing: lifting speed is equal to the lifting height/(the volume of a cylinder/pump displacement) this article provided by jinan international hydraulic machinery co., LTD. Is for reference only
- Q:The home is decorated, make a tatami mat the platform should pay attention to what aspect?
- The key to the tatami mat is the choice of the middle lift. Attention should be paid to several aspects: the control mode of the tatami platform, the safety clamping system, and the manufacturer and brand.
- Q:Operation and attention of electric elevating platform car?
- Gives you an explanation of the items of electric elevator: In order to ensure the use of safety and keep the machine in good working condition, the appearance performance check should be performed first. The inspection is as follows: Using the operating: A, the power cord is in good condition; B, the buttons are valid; C, oil pipelines, etc. D, the intersections of the intersections of the arm frame are fastened.
- Q:How is the small electric shearing fork lift designed
- Shear fork lift platform is mainly used in the logistics industry, production lines, lifting, loading and unloading goods to floor between basement, can also be used to lift stage, lifting work station, etc. The product has a stable structure, low failure rate, reliable operation, safe and efficient and easy to maintain. The fixed platform shall be equipped with the requirements of use, and the attached devices shall be configured for any combination such as the safety protection device of the platform. Electrical control mode; Work platform form; Dynamic form; Walking actuators and so on. The correct choice of all kinds of configuration, the function of the lifting platform can be maximized, the best use effect is obtained.
- Q:The single fork hydraulic lift platform
- If you don't have a hydraulic lock on the oil circuit, it should be,I hope my answer will help you
- Q:What are the elevating institutions
- Four-wheel mobile elevators and two rounds of traction elevator, car modification lift, storage battery lift, self-propelled elevator, lifting height range from 4 m to 18 m
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range