ARAB Electric Kettle 2L/ 1500W
Specification of ARAB Electric Kettle 2L/ 1500W:
Inner wall of the label
304 Stainless Steel
Features of ARAB Electric Kettle 2L/ 1500W:
1. 360 Degrees rotation base, cordless body;
2. Cord storage design;
3. Indication light at the bottom;
4. Automatic shut-off when water boils;
5. Boil-dry & Overheating protection;
6. 100% boiled water;
7. Press button controlfor cover open.
Units / Carton
QTY LOAD 20'
QTY LOAD 40'
QTY LOAD 40'HQ
- Q:Can the lid of the electric kettle be boiled ginger and cola?
- Yes, you can, but it's dangerous because the coke is very high in sugar and very easy to paste, so it's really dangerous to cook it all at the end of the day!
- Q:Can electric kettles cook rice dumplings?
- When using an electric kettle, you must first load the water and then turn on the electricity. You must not let the electricity go on and then fill it with water. Pour water into the pot. At least you should have the lowest water level, but not exceed the required maximum water level. An electric kettle can not be used to boil things containing acid, alkali and salt so as to avoid corrosion of the kettle body and heater. And often remove the scale or other stains on the electric heater, otherwise it will affect the thermal efficiency and service life of the electric heater. When the electric kettle is not in use, it should be placed in a dry place so as not to damp and reduce the safety performance.
- Q:Power consumption of electric kettle
- General big kettle power is about 2KW, the average burn a pot of water in the 8-15 minutes, and according to the changes of air temperature and air pressure changes, if you burn a pot of water for 2 days, a pot of water for ten minutes, 20 degrees for about a month, some will plug the kettle boiling water repeatedly, it would be more expensive electricity recommended to buy a large pot, to the base, and automatic tripping, so that students have repeatedly boiled water
- Q:The principle of automatic power-off electric kettle?
- Automatic temperature control circuitThe pot boil dry pot is a power automatic temperature control circuit in series. The temperature sensor circuit. The boiling point of water is one hundred degrees, when the water is dried after the temperature will exceed one hundred degrees, when the temperature sensor will disconnect the circuit. The temperature sensor is simple bimetal, commonly used in electric iron electric water heater appliances. Many kinds of temperature sensors. And the semiconductor temperature sensor. It has the advantages of simple structure, safe use, good reliability.
- Q:Why doesn't the electric kettle open automatically when the lid is opened?
- Because you open the lid, steam directly ran, you cover the lid, the steam will have a hole from the lid, directly into the heat up and shrink the metal sheet, the metal will rise when heated, upturned to the top of the switch, the power will be switched off. If you do not automatically power off, take apart the metal pieces, and slightly break up the point with your hands on it. There is no electronic induction, much of it physics.
- Q:What is a radio kettle?"
- It's just a statement. It's easier to distinguish from a common kettle.In fact, the kettle body can be separated from the kettle with the power cord!An ordinary kettle heated on a gas cooker or an induction cooker is easier to use than before.You can always see it in the hotel and hotel!I hope my answer can be useful to you! .
- Q:Why electric kettle leakage?
- It is not a product problem, first unplug the socket, see above the target line, zero N line, L line, E line, is to see if the three-phase wire is plugged in, if it is two look when there is no plug plug on the corresponding zero line and FireWire. The words on the line inserted upside down.If you can't do it, use the electric lead to get a scrap of wire, rub the ends together, connect one end of the wire to the metal surface of the leak, and the other end to a nail or wall.
- Q:What's the steel tube in the electric kettle?
- Temperature sensor in the tube to the top of the water to the position, when the water floating after steam heating is generated by the sensor signal, through the wire in the tube to the bottom, disconnect the power control mechanism. Open the lid of the steam leak, cold air into the sensor, less than 100 degrees, the electricity has been burning.The heating tube is at the bottom of the kettle! The lid has no sensors, no wires, no electrical signal path!
- Q:How can I see the qualified product in the kettle itself?
- Buy out products Co. temperature control function. When the water is boiled, the thermostat can automatically cut off the power supply.
- Q:The electric kettle temperature control switch is broken. How can I fix it?Can't fix it!
- After heating, the heater is not heated, but the indicator light is onThe light, that the power has been added to the indicator light circuit, fault in electric heating tube or the connecting part, common electric heating tube damage and bad contact. Remove the electric heating tube, measure the resistance can be determined. The electrothermal tube is damaged, the general can only be replaced. Contact reed mainly due to severe corrosion bad power plug in components or deformation. Can open the switch box cleaning and maintenance, the best new damage serious.
we located in Cixi, Zhejiang Province, where the world-famous Hangzhou Bay Crossing-Sea Bridge originates. Established in 2010 ,is an environmental-friendly and high-tech company that specializes in the design, development, production and sales of air purifiers, as well as fruit & vegetable facial mask device and efficient vegetable washers.
1. Manufacturer Overview
|Annual Output Value
||Above US$16 Million
Mid East；Western Europe；North America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||Above 5,000 square meters
|No. of Production Lines
||OEM Service Offered；Design Service Offered
|Product Price Range