Q:Double hole basin faucet how to install, what tools?

Double hole is mainly for hot and cold water mixed with water, no hot water, just take a cold water pipe. The other who is blocking it.

Q:I have a single basin faucet. How do I change it into a regular faucet without replacing it?

If you find a way to change it with out replacing it, would you also find a way to change lead into gold ,Please.

Q:Tablet and pot under the basin difference between the choice?

The advantages of the table: easy to install, easy to disassemble and repair; Disadvantages: and the table of the link prone to the tank tank leakage and health hazards, the installation is not careful, then there will be exposed glass

Q:will connect to vintage tub basin connected to pump.

Have a blacksmith create one for you.

Q:How to change the faucet of the washbasin?

First of all to turn off the water valve at home. Place the faucet in the release tube with water pressure. With a wrench to tap off the tap, try to slow down to keep the faucet long time in the inside may be in trouble.

Q:Is it necessary to use a corner valve below the basin faucet? What is the role?

With the angle valve is easy to replace the faucet in the future, if the faucet is broken, can turn off the water in time, you can also adjust the water pressure of the faucet.

Q:Hot and cold faucet how to take water pipes

Shower, bath faucet (wall) When you buy a shower, bathtub, wall faucet, you can choose the appropriate height to bury the water pipe. Hot and cold water pipe spacing must reach 15 cm. Before installation, do not forget to rinse the water pipe, so as not to water quality, concealed shower, bathtub faucet: the purchase of darkener faucet, the general spool of the faucet embedded in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be embedded. When the pre-embedded plastic cover of the spool should not be removed easily, so as not to damage the spool when cement and other chores are embedded. Also in the embedded spool should also pay attention to the upper and lower spool, left and right direction, so as to avoid spool error. Wall faucet embedded in the water pipe when the size of the deviation, can be used to adjust the kidnapping school.

Q:Home water heater through 6 points of hot water, only three points out of hot water, the other out of warm water. And the location of the hot water and warm water are used together to warm the wall, do a circulating hot water. Whether I am hot water or return water to the hot water is always only a point of hot water, but one of the points of the location of the change

There is a problem with the setting of the circulating water pipe

Q:Does it take any special plumber tools? I am very mechanically inclined but I know that in some plumbing jobs it takes special tools. I want to changing a basic 4 bathroom vanity faucet. Anyone have some pointers out there? Or should I call a plumber?

You can change it yourself. I will suggest buying a Basin Wrench. Getting to, and turning the nuts behind the sink is a pain. A basin wrench has a rod with a hinged head so you can reach up between the sink and wall to loosen or tighten the nuts. If the sink is marble, do not use plumbers putty on the faucet bottom as a seal. The putty and marble will react and stain the marble.

Q:want to change the faucet of the wash basin, ask the steps. There are pictures

During installation, use a raw material tape at the interface to prevent future connections from leaking. I believe you can succeed. Give me extra points