ALUMINUM FOIL LAMINATED CRYOGENIC INSULATION PAPER FOR LNG CYLINDER
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 10000000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminum Foil Laminated Cryogenic Insulation Paper for LNG cylinder
Cryogenic insulation paper/radiation shield compositions:
Cryogenic insulation paper(P paper/Z paper)/aluminum foil(or aluminized polyester film) compositions are laminated of Cryogenic insulation paper and aluminum foil(or aluminized polyester film).These products can be wrapped to the cryogenic inner tank directly and no need to composite by user. Therefore ,it can effectively reduce the waste of material and hugely increases efficiency. The width varies from 40mm to 1800mm.
Specification
technical specification | aluminum foil | aluminized polyester film |
condition | anneal | vcauum aluminizing |
Thickness | 0.0065 | 0.012 |
surface oiliness | without oil, not less than calss B on brush water test | No oil |
Harmful Element(%) | Pb<0.01 Cd<0.01 As<0.01< span=""> | / |
Width | 30-1780 | 30-1780 |
Advantages of Cryogenic Insulation Paper
Flame-retardant
Light
High tensile strength
Low heat conductivity coefficient
Large thermal contact resistance
Low air content under the vacuum and broad operating temperature(-269℃-500℃)
FAQ
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks, 10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
Q3: Can you offer Door-to-Door delivery?
A3: Yes, but only for some countries such as U.S., UAE, Saudi Arabia, Iran, and Russia, etc.
- Q:What is a cryogenic fast line
- Cryogenic metal industry technology refers to the black metals, nonferrous metals, polymers, carbide and so on at cryogenic temperature heat preservation material, make it happen at room temperature and never happened in the process of heat treatment of the internal structure change, lead to the change of macro performance. For example: die steel, high speed steel, cemented carbide strength and toughness were improved after cryogenic treatment, and break through the traditional hardness and toughness of contradictory phenomenon, show the comprehensive performance improved. Domestic contribution to cryogenic technology research institute of Chinese academy of sciences, is the biggest should from the several aspects, such as equipment, mechanism, process research and extension of cryogenic technology, cryogenic in cutting tools, moulds, valves, and other industries extensively with the Chinese academy of sciences of physics and chemistry ? all the inseparable relations
- Q:Cryogenic treatment to improve what performance?
- To improve the hardness and strength of the workpiece;Ensure the dimensional accuracy of the workpiece;Improve the wear resistance of the workpiece;
- Q:How many changes in the properties of the cryogenic metal?
- 4 milling cutter milling hole surface Phi 12, 48-2NT5 milling cutter milling end 13, 48-2NT6 high speed steel twist drill drilling A3 of 129 2967 high speed steel twist drill drilling 40Cr of 146 3588 high speed steel 8 drill wear 25cr2NiMoV 10 hole 40 hole wear9 high speed steel 10 bit hour HT20-40 1235
- Q:I would like to ask how the process of cryogenic treatment
- Biology: fast cooling, can prevent the crystallization of cells in the water, does not destroy the cell organization. In the preservation of sperm, organ preservation, food preservation, preservation of certain life and so onMedical treatment: cryotherapy, treatment of certain skin diseasesSpace: the space environment simulation, satellite ground test station, using liquid helium, create -200 degrees of low temperature.Noise: high sensitivity radar telescope, using liquid helium cooling, receiving device, noise reductionVacuum: the use of cold well technology can get high vacuum
- Q:What is the meaning of vacuum cooling in heat treatment
- In order to eliminate residual austenite after heat treatment, after quenching or tempering
- Q:What is the meaning of deep frozen
- In general, the frozen layer of our home refrigerator can only reach -18 degrees, but also slow freezing, slow freezing will have a great impact on food nutrition and flavor.
- Q:Can the cryogenic phase control the cooling rate?
- 2, the compressor refrigeration principle: the use of the suction pipe of refrigerant gas inhalation of low temperature and low pressure, through the operation of the motor drives the piston to compress it after high temperature and high pressure refrigerant gas discharge pipe to the exhaust, to provide power for the refrigeration cycle, so as to realize the compression, condensation, expansion and evaporation (endothermic) refrigeration cycle. The refrigerant of the compressor can be repeatedly used for a plurality of times, the consumption is relatively small, the power consumption in the refrigeration process is more, the cooling rate is relatively small, and the refrigeration temperature range is 0-80 DEG C. The above mentioned two kinds of refrigeration in the process of industrial production of cryogenic box, the use of liquid nitrogen refrigeration will be more. Liquid nitrogen refrigeration can be used in the temperature range from 0 DEG C to -196 DEG C. []
- Q:What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- High speed steel W18Cr4V cryogenic hardness, impact toughness and wear resistance are significantly improved with the use of its manufacturing tool life increased by 2~5 times
- Q:Ultra low pressure casting mold useful, how to arrange the process? Thank you
- The size stability of die casting die is mainly solved by the following aspects:1, in the die casting process and mold temperature stability under the premise of the mold size! To ensure product size!2, in the design of die casting products, according to the way the product and the simulation of the temperature field, the type of product, the direction of contraction and so on to develop the contraction ratio, the general product shrinkage rate of about 5/1000! Step by step cumulative experience!3, die casting mold in the production period of time, (for example, 5 thousand to 10 thousand times), can do stress treatment, ABP treatment, etc.! In order to reduce the internal stress in the production process of the mould, it can achieve the purpose of stabilizing the size, preventing the fracture and increasing the service life of the die!Want to help you!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
ALUMINUM FOIL LAMINATED CRYOGENIC INSULATION PAPER FOR LNG CYLINDER
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 10000000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords