Aluminum Foil Composited Insulation Material FBBM1002

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
10000 m²
Supply Capability:
1000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Aluminum Foil Bubble Heat Insulation

Description of Aluminum Foil Bubble:

 

Aluminum foil and bubble is the better product in the environmental protection, thermal insulation thermal insulation. The outermost PET has good abrasion resistance and high strength tear resistance. The bubble between the aluminum foil not only has a strong moisture, resistance oxygen, sound insulation, drop noise function, aluminum foil bubble also has very good reflective inverse heat, blocking ultraviolet.

 

Features of Aluminum Foil Bubble:

 

It is the high quality heat insulating and the invincible opponent of anti- condensation. The low and stable coefficient of heat conduction has good isolation effect.

The product has many advantages, such as light weight, heat insulation, shock absorption, sound absorption and noise reduction;

The product is easy to install and process and it also waterproof, seepage control, flame retardant.

The product also has many features, such as heat resistance, low temperature resistance, chemical resistance, ageing resistance etc.

 

Application of Aluminum Foil Bubble:

 

Building reflective heat, cold and hot water pipe insulation;

Refrigerator partition, central air conditioning, refrigerator and household appliances insulation;

Insulation, sound-absorbing, noise reduction and moisture-proof insulation in the car, train, refrigerator car, laboratory and other industries;

Special product packaging and refrigerated packing and so on

 

Pictures of Aluminum Foil Bubble

 

 

 

Specification of Aluminum Foil Bubble

 

STRUCTURE

ALUMINUM FOIL/BUBBLE/ALUMINUM FOIL

ALUMINUM FOIL/ BUBBLE/BUBBLE/ALUMINUM FOIL

ALUMINUM FOIL/WOVEN CLOTH/BUBBLE/WOVEN CLOTH/ALUMINUM FOIL

MPET /BUBBLE/MPET

ALUMINUM FOIL/BUBBLE/FOAM/BUBBLE/ALUMINUM FOIL

THICKNESS

1-4mm

8mm

6.5mm

4mm

4mm

WEIGHT

120GSM

240GSM

180GSM

120GSM

445GSM

BUBBLE SIZE

4mm HIGH x 10mm DIAMETER

2mm HIGH x 10mm DIAMETER

4mm HIGH x 20mm DIAMETER

4mm HIGH x 10mm DIAMETER

2mm HIGH x 10mm DIAMETER

FOAM THICKNESS: 3.5MM

WIDTH

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

THERMAL CONDUCTIVITY

0.034w/mo

0.032 w/mo

0.032w/mo

0.034w/mo

5.87m2.k/w

REFLECTIVITY

96-97%

96-97%

96-97%

96-97%

96-97%

 

FAQ

We have organized several common questions for our clientsmay help you sincerely:

①How about your company?

A world class manufacturer & supplier of aluminum foil bubble insulationis one of the large-scale professional investment aluminum foil composite insulation bases in China, consisting of both casting foundry forging and machining factory. Annually more than 100,000 square meters foil insulation are exported to markets in Europe, America and Japan. OEM service available according to customer’s requirements.

②How to guarantee the quality of the products?

We have established the international advanced quality management systemevery link from raw material to final product we have strict quality test; We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 20 to 25 working days can be served.

What is the storage condition?

The welded wire mesh should be stored at room temperature and kept from wet and heat source.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Attic Roof Insulation?
Such an interesting question when you sit down to answer it. First off, if there are any vents to the exterior, its not likely that you will want any additional heat to enter the space, as it will flow out of the vents to the outside and cost far more money than heat that is lost by thermal transfer, through the doors, windows and insulated walls and ceilings. So, any increase in the source of heat would mean closing the system to outside air vents like the fan and the soffit vents. If you want to heat the space, you'll need to insulate the roof by adding fiberglass batting to the space between the rafters and then drywall or panel depending on local building code and your preferences. Then you'll need an avenue for heat to reach the attic which can be as simple as cutting a couple of floor grates through to the heated space below, but you'll want cold air return ducting to send the cold air that is displaced by the heated air back down to the furnace. Then you'll need to seal the gable fan and insulate, perhaps with a box you can remove in the spring and replace in the fall. Now that the attic is integrated in the HVAC system, you no longer need the soffit vents. If you don't have a forced air system, there is less concern about the cold air return, as your heat source would be in the room or you can just use floor grates on opposite ends of the room for both the warm air and cold air exchange. Place one near the heat source below and one well away from it.
Q:Metal roof - insulation & ventilation question?
You don't need insulation for this application. If you haven't purchased the metal yet I would recommend looking for a standing seam roof system that the panel does not come in contact with the substrate and does not use exposed fasteners. If in the future you did decide to enclose the porch and add heat you could insulate the ceiling and leave an air space under the decking that could be ventilated from the eave to the ridge. A cold roof assembly with proper ventilation will dramatically reduce the potential of the metal panels sweating.
Q:how does shredded newspaper insulation get in your roof?
It can be blown in or more often it comes in large bagged bales and you cut and dump in the attic. The eaves are the portion of the roof that overhangs/extends past the wall. It's usually called a patio cover Orientation is how the home (or other structure) is positioned on the lot. They let in lots of light and are very attractive.
Q:Flat roof replacement,is bitumen used as flashing? What type of insulation is best when replacing a flat roof?
We use kingspan insulation, marine grade plyboard , 3/4 inch, and yes you can use bitumen as flashing. I hope i am not being condescending, but the flashing is the bit that goes from the roof and a little way up the wall and is then "pointed" into the bricks, thus forming a water-proof barrier.
Q:Is it worth to insulate the roof with styrofoam (thermocole)?
if u mean roof as just below the shingles this is not recommended as it will cause the shingles to become very hot and prematurely fail,,the best way to lower the heat in an attic is ventilation,,if u have an attic its best to insulate the floor of the attic and lots of ventilation
Q:Can I tear out all of the blow in insulation in the roof?
You can remove it, but why not replace it with rolled insulation? I'm sure you're local State Board of Health would disaprove of not having your tenant's homes properly insulated. You could get into a lot of legal trouble if you do not keep you apartment building properly maintained.
Q:Can I insulate my aluminum patio roof?
Yes you can....you can use metal strapping to hold up 2" foam insualation to the underside of the metal roof that you can get at Home Depot, Lowes, or any hardware store good luck
Q:why do icesicles form on the edge of my roof in the winter when my insulation value in my attic is at the...?
"R" I think stands for "Resistance" factor against heat loss. It resists the heat transfer but doesn't stop it. There is no such thing as perfect insulation. Snow itself is a rather good insulator. So even though you are only losing very little heat, the snow on top of the snow directly on the roof helps trap that heat at the bottom. So the first layer will melt.
Q:How to insulate roof with syrofoam rectangles?
Visit your local Lowes, Ace, or Home Depot. Buy a caulking gun and a few tubes of industrial grade adhesive from their large selection. Read the label and choose an adhesive that mentions both plastic and metal. (If I were doing it, I would try some silicon on the Styrofoam and if it doesn't melt, use silicon, but there are dozens of different adhesives on the shelves.) Once you have the right adhesive, cut the foam to fit snugly between the roof members, and stick them up. To cover the Styrofoam, use any lightweight material you can find. I would try to find wall paper that simulates barn-board. (I have seen it somewhere.) Just apply a coat of wallpaper sizing to the Styrofoam first to give the wallpaper glue something to stick to. Most wallpapers already have the glue on the back; you just run it thru water to wet it. I use a large paint roller tray with a piece of stiff wire across it. Then I drop my cut to length strip of paper in the deep end of the tray and pull it thru under the wire. Have fun. Honey
Q:Tax Question: Itemized receipt for roofing and insulation?
The insulation is a tax deduction. Call the contractor and ask for an itemized reciept for tax purposes.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range