Aluminum Foil Composited Bubble Insulation FBBF1001

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT or LC
Min Order Qty:
10000 m²
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Aluminum Foil Bubble Heat Insulation

Description of Aluminum Foil Bubble:

 

Aluminum foil and bubble is the better product in the environmental protection, thermal insulation thermal insulation. The outermost PET has good abrasion resistance and high strength tear resistance. The bubble between the aluminum foil not only has a strong moisture, resistance oxygen, sound insulation, drop noise function, aluminum foil bubble also has very good reflective inverse heat, blocking ultraviolet.

 

Features of Aluminum Foil Bubble:

 

It is the high quality heat insulating and the invincible opponent of anti- condensation. The low and stable coefficient of heat conduction has good isolation effect.

The product has many advantages, such as light weight, heat insulation, shock absorption, sound absorption and noise reduction;

The product is easy to install and process and it also waterproof, seepage control, flame retardant.

The product also has many features, such as heat resistance, low temperature resistance, chemical resistance, ageing resistance etc.

 

Application of Aluminum Foil Bubble:

 

Building reflective heat, cold and hot water pipe insulation;

Refrigerator partition, central air conditioning, refrigerator and household appliances insulation;

Insulation, sound-absorbing, noise reduction and moisture-proof insulation in the car, train, refrigerator car, laboratory and other industries;

Special product packaging and refrigerated packing and so on

 

Pictures of Aluminum Foil Bubble

 

 

 

 

Specification of Aluminum Foil Bubble

 

STRUCTURE

ALUMINUM FOIL/BUBBLE/ALUMINUM FOIL

ALUMINUM FOIL/ BUBBLE/BUBBLE/ALUMINUM FOIL

ALUMINUM FOIL/WOVEN CLOTH/BUBBLE/WOVEN CLOTH/ALUMINUM FOIL

MPET /BUBBLE/MPET

ALUMINUM FOIL/BUBBLE/FOAM/BUBBLE/ALUMINUM FOIL

THICKNESS

1-4mm

8mm

6.5mm

4mm

4mm

WEIGHT

120GSM

240GSM

180GSM

120GSM

445GSM

BUBBLE SIZE

4mm HIGH x 10mm DIAMETER

2mm HIGH x 10mm DIAMETER

4mm HIGH x 20mm DIAMETER

4mm HIGH x 10mm DIAMETER

2mm HIGH x 10mm DIAMETER

FOAM THICKNESS: 3.5MM

WIDTH

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

1.2m (MAX 1.5m)

THERMAL CONDUCTIVITY

0.034w/mo

0.032 w/mo

0.032w/mo

0.034w/mo

5.87m2.k/w

REFLECTIVITY

96-97%

96-97%

96-97%

96-97%

96-97%

 

FAQ

We have organized several common questions for our clientsmay help you sincerely:

①How about your company?

A world class manufacturer & supplier of aluminum foil bubble insulationis one of the large-scale professional investment aluminum foil composite insulation bases in China, consisting of both casting foundry forging and machining factory. Annually more than 100,000 square meters foil insulation are exported to markets in Europe, America and Japan. OEM service available according to customer’s requirements.

②How to guarantee the quality of the products?

We have established the international advanced quality management systemevery link from raw material to final product we have strict quality test; We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 20 to 25 working days can be served.

What is the storage condition?

The welded wire mesh should be stored at room temperature and kept from wet and heat source.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why is the most insulation needed in ceilings or roofs?
well insulation in general is to keep the inside temperature different than the outside. since hot air usually rises, i think it is to keep warm air form escaping in winter. also you don't usually have a heater in the attic, or air conditioning so insulation will keep the air in the attic from having an effect on the air within the house. that is my idea as to why
Q:Can you put fiberglass insulation on the under side of roof tiles in the loft in the house?
I would be concerned that this may cause moisture to form between the roofing and the insulation. They make a special foam panel that fit underneath the roofing in between the roof rafters. They allow air to flow from the eave to the roof's ridge.
Q:Is it a practice in the US to use board insulation as a retrofit under pitched roofing material?
The sip panels are vented depending on what thickness over all that you want. The last ones I used had 4 inches of rigid foam board then on top of that had 3" strips every 16" an inch thick which created an airspace. On top was 5/8 Osb. To create an affective air flow the fascia cannot plane through with the plywood at the bottom but fall just short of the 1" space. To cap it a oversized vented drip edge is used. You must also have a ridge vent for proper flow. These panels can near 100$. You can do it your own way like I do when building log cabins by laying 2" foam down first then lay 2x4 16 on center on top then finally your plywood. If you use CDX instead of Osb it will outlast it by 100%. Rigid foam insulation is not like batt-faced. Rfboard ins. Is used in boat hulls and even after being submerged for long periods of time will return to its original density and r-value. For obvious reasons batt ins. Will not. You won't have a moisture problem as long as you don't have a venting problem. If you are using high hat lighting don't let the cans touch your rigid ins. Tuck batt in softly around them TAKE THE PAPER OFF! By code if you have an interior wall 10or more ft. It must have a fireblock, simply a 2x4 turned flat between the studs. On your roof the ceiling you see inside, (most likely 7/8 tongue and groove boards) passes as the same. Good luck!
Q:ROOF INSULATION how to add more insulation on the outside!!!?
You could have foam roofing installed over the existing roof covering. Look up "foam roofing" on the Internet.
Q:is it safe to put insulation in the corners where the roof meets the wall in attics?fiberglass in corners?
No it is not EVER safe! Roofing material needs to breathe. Anywhere that insulation is applied to the underside of the roof deck the roofing material will warp and then leak. You have to have a cushion of air between the underside of the decking and the insulation
Q:NH3 storage having insulation to wall (annual space ) but not on top roof (dome), pl tell me any tech.per.?
Insulation is less necessary on the roof. The ammonia is mostly a liquid, and a liquid would absorb heat rapidly from tank walls. Above the liquid is vapor, and vapor absorb heat much less rapidly than liquid does, so insulation is less important there.
Q:what is the best insulation to use blown or fiberglass over an already fiberglass insulated roof?
Blown in will be the easiest to install, and it also has the advantage of being seamless. It is possible to rent a blower and do the installation yourself, but many inexperienced people who try that end up with a poor job in the end. Call an insulation contractor or two for a free estimate. After the job is done, insist that the installer provide you with an empty bag of the product used, and also ask how many bags were installed. The bag has a chart that will tell you how many bags are required per square foot, so you can have some assurance that the job was done correctly.
Q:insulating my shed roof?
Sorry Insulating alone is not going to work.You;re going to need some kind of heater.
Q:Is it just as good to insulate my roof as it is to insulate the ceiling of the top floor?
Insulate the floor and Install a 240V electric heater in the attic so you can turn it on when using that space. Since your not using this space for sleeping I see no reason to insulate the rafters and risk the problems mentioned above. Unless you like paying taxes don't finish off this room, leave the rafters exposed.
Q:I want to put 19" un-faced fiberglass insulation on my trailer roof. I think a vapor barrier could cause a problem?
your plan is good ...

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range