Aluminum Coils, Factory Price from China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 9000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminium isa relatively soft, durable, lightweight, ductileand malleablemetalwith appearance ranging from silvery to dull gray, depending on the surfaceroughness. It is nonmagnetic and does not easily ignite. A fresh film ofaluminium serves as a good reflector (approximately 92%) of visible lightand an excellent reflector (as much as 98%) of medium and far infraredradiation. The yield strength of pure aluminium is 7–11 MPa,while aluminium alloys have yield strengths rangingfrom 200 MPa to 600 MPa. Aluminium has about one-third the densityand stiffness of steel. It is easily machined,cast, drawn and extruded.
Alloy : AA1235/1050/1060/1100/3003/8011/8006/8079/8021 etc.
Temper: H14/16/18/22/24/26,HO etc.
Thickness: 0.006mm—0.20mm
Width: 200mm—1600mm (Can be slitted)
Coating : HSL/Primer
Color : According to customers’ requirements
Features:
1.Superior quality of raw material.
2.Reasonable and stable chemical composition.
3.Accurate tolerance.
4.Goode mechanical property.
5.We have the certificate of ISO9001.
6.Our quality is based on EN,ASTM,JIS.
7.We provide free sample service.
8.The products can be made according to your requirement.
9.Sincerely welcome your inquiry.
Company Information
CNBM is one of the most professional aluminum processing factoriesin China. It specializes in manufacturing aluminum
sheets, aluminum coils, aluminum foils and aluminum strips.Our main equipment is imported from abroad, ensuring the
aluminum products meet GB/EN standards. Our products have passed ISO9001:2000 quality management system certification and SGS certification. 30% of our products are exported to North and Sourth America, Europe, Southeast Asia, Africa, the Middle East. Our aluminum products are widely accepted by domestic and overseas customers.
- Q:Now all I have is a cooking oven to cook it in, does anyone know at what and how long i should cook it for? And what should i put it on? Ive see some pages on putting it on Parchment paper and aluminum
- The usual temperature for most polymer clay is about 275 degrees for fifteen minutes per 1/4th inchI usually add an extra fifteen minutes to that to make sure it's firmParchment paper is best for cooking it on.
- Q:Me and a few friends are helping out a friend who is moving into a new place.Her new place is empty, she has nothing no sofa, bed, tv or anything, not even any money leftWe are piling up a list of what are the essentials she will need, so we can get them for her tomorrow.So far we have a sofa, bed, kettle,toaster,cups, tableware's,table, tv, wardrobe, lamp,curtains.Anything else?
- List of things you should never leave out are kitchen ware like knifes,spoons, plates, pans, pots, Sanitary ware, Electrical plugs and other electrical devices needed , Toilet paper, table lambs, Ceiling fansIf you guys are low on money why dont you go check out some yard sales or go on-line to find cheap furniture Also try and look for furniture in junk stores of buy some second hand stuff
- Q:I am attempting to cook one of those Hormel Pork Tenderloins tonight, the teriyaki one (also, is there a better tasting one?), and I was just wondering what would be the best way to cook it without drying it out and also what would be a couple excellent side dishes with it? Thanks for your help!
- They're easy to cook, and especially if you have a probe thermometer so you can just set the temp you want (I set mine for 153-155? F since meat will rise another 5 degrees while resting after cooking).or you can just use the recommended time on the pkg which I can't remember now (about 30-35 min, I think)Those Hormal tenderloins really will not dry out, even uncovered, because they've been well marinated (and probably brined too) unless you overcook them of course(No basting necessary with these.) Personally, I like the Black Peppercorn one the most, but some of the others are okayFor hunks of meat, I usually have a starch on the side plus one veggie and often fresh fruit Some possibilities for starches would be noodles (or egg noodles topped before serving with a bit of butter and grated parmesan), or brown rice, or potatoes of some kind, yams, etc If you put the tenderloin on a piece of aluminum foil (on a baking pan) that's not much bigger than the bottom of the meat and make kind of a little wall with it, you'll have enough juice after cooking to lightly pour over the slices you'll cut and/or over any starches (if the area is open and too big though, those juices will harden on the foil)I make one corner of the foil into a little spout to facilitate the pouringFor Asian-flavored meat/poultry/fish entrees, I might do a veggie like sesame spinach, or green beans (espthe long skinny Asian ones) sauted in garlic and perhaps balsamic vinegar, etc, or just any plain green veggie like broccoli or a side green salad, etc.
- Q:I am trying to find the creams in aluminum containersThey are my favoritesBut I cannot find on ebay or amazonI have searched a lot/ Where do you think I can buy them?Thank you very much
- L'Occitane had a hand lotion in one; but for the most part they have been phased out.
- Q:Okay so i am making this cakei needed it to be in a dome type shape, so i lined a strainer bowl with tinfoil, put the tinfoil mold onto a 9 inch round pan, and put tinfoil around the mold to help it keep its shapeIs the outside going to burn or something? i'm just not entirely sure how this is going to work.any help would be awesome! Thanks!!!
- No point getting a new bolt or power tubeNeither have any advantages, you'd just be wasting your money.
- Q:I'm making tiger butter (mix of white and semi sweet chocolate and peanut butter) and it says to line a pan with parchment paper-i suspect this is just for an easier clean up- so does anyone know if it's okay if i just use aluminum foil? (maybe greased?)
- Hot ToolsYou can go to Ulta if there is one by you, they have a huge selection of hair straightenersChi's are really good, but really expensiveI have a Conair Pin Straight as well and mine works fineBut I have thin wavy/straight hair.
- Q:I need to make a mask for a school project due FridayUnfortunately, we don't have any aluminum foil which I had planned on usingand we lack balloons, too.Is there any way to make the mold without using a balloon or aluminum foil?Thanks in advance.
- Patience and use it like somesort of clayOr use your own face or someone elses to make it onMake sure you wash the face before and after, and keep it soapy and a little wet before you startThis will make it easier and less painfull to remove afterwardsDid it myself a few times, it is possible.
- Q:I've got some craft punches (the x cut jigsaw shaped ones) - but the punched shape has tatty edges because I've used the punch so much it's got a bit bluntHow do I sharpen it again? - I've read on other web sites that punching through aluminium foil or very fine grained sandpaper will re sharpen it - but am a bit worried about trying this in case it just makes the punch even more blunt.has anyone ever tried it? is there another way of sharpening them?
- I have welded and been around welding for many years and have yet to see aluminum joined with torch weldingYou need it TIG welded to get the strength needed for a bikeIt could be MIG welded but this is not as nice a looking weld.
- Q:Why aluminum foil should be used in capacitor material of distributors?
- The normal metal capacitor, especially CBB21/，DV/, impulse current of its turn-off voltage is very high. The capacitor material of distributors, if the distributors of ignitor can't bear such high impulse current. Using CBB28 or CBB8,in which the capacitor can bear a higher impulse current.The ratio of DT is higher.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Aluminum Coils, Factory Price from China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 9000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
