||1000 Series,2000 Series,3000 Series,4000 Series,5000 Series,7000 Series,6000 Series
Structure of Aluminium Strip for Auto parts Application in Cars Description:
Coated aluminum coil/sheet are of a wide range of colors, which gives wonderful appearance no matter in residential and commercial constructions of great exhibition centers.
The coated aluminum coil/sheet have been widely used in the fields of construction and decoration( garage doors, ceiling etc.), electronic appliances, lighting decoration, air-condition air pipes, sandwich panels and drainages etc.
Main Features of the Aluminium Strip for Auto parts Application in Cars:
1) High flexibility
2) Impact resistance
3) Excellent weather-proof durability
5) High erosion resist
Images of the Aluminium Strip for Auto parts Application in Cars:
Aluminium Strip for Auto parts Application in Cars Specification:
From 0.024mm to 1.2mm
2.5 T/coil,3.0 T/coil
PE, PVDF, AC
Embossed, mill finish, coated
AS to code RAL
PE: more than 18 micron
PVDF: more than 25 micron
More than 2h
No peeling or cracking(50 kg/cm,ASTMD-2794:1993)
More than 100
a.What is monthly capacity
---CNBM is one stated own company and our monthly capacity is about 2000tons.
b. Now which countries do you export your goods?
---Now we export to South East Asia,Africa, North America,South America ect.
- Q:Aluminum foil tape insulation principle, why insulation?
- It has the functions of heat insulation, waterproof, moisture-proof and so on. Its solar radiation absorption coefficient is very low, which can insulate most of the heat transfer.
- Q:What kind of mask is good for welding aluminum strips?
- The welding aluminum strip will produce certain peculiar smell and aluminum chip. Can solve this problem at the same time, activated carbon mask can solve, activated carbon can absorb some peculiar smell, at the same time can come dust.
- Q:What is the ratio of the thickness of the aluminum strip to the joint of the knife?
- For example, O soft, tear ratio smaller, shear thickness of 70%. However, the H state is hard, the tearing ratio is large, and the shear ratio is small, which is about 30%.
- Q:Aluminum band treble sounds good?
- The impedance of the 1. aluminum band tweeter is almost constant, so there is an excellent frequency response curve in the high frequency band that does not begin to decay until near 40khz.2., compared to ordinary metal treble, sensitivity is higher, the aluminum ribbon tweeter sensitivity is almost above 90db.
- Q:The role of aluminum strip in tanks
- The utility model can smoothly, rapidly and safely pass through various complicated traffic conditions, and because the ground area is large, the passing capacity of the tank on the soft and muddy road is increased, and the subsidence amount is reduced.
- Q:Why is the president of aluminum strip mildew, will affect the performance of the transformer?
- Can test the resistance, running temperature and other indicators, and the provisions of the comparison.
- Q:What's the difference between aluminum strip and aluminum alloy?
- The most common aluminum alloy is magnesium aluminum alloy, widely used in doors and windows frame. Light quality, high hardness, high strength and beautiful appearance. Of course, the magnesium aluminum alloy is also very many kinds, the use is more widespread. The aluminum is soft, low strength and easy to corrode. Aluminum cookers also cause excessive aluminum poisoning
- Q:Why should single core cable be armored with aluminium tape?
- Therefore, the aluminum sheath is used to allow magnetic flux to produce an induced current in the aluminum sheath, thereby substantially reducing the magnetic induction of the other external metal parts. The low resistance of the aluminum skin can reduce the heating induced by the induction current
- Q:Use of aluminium strips for aluminium strips
- 1060 requirements of corrosion resistance and formability are high, but the strength requirements are not high, chemical equipment is its typical use1100 for processing requires good formability and high corrosion resistance but is not required to have high strength parts, such as chemical products, food industry device and storage containers, sheet processing, deep drawing or spinning concave ware, welding parts, heat exchanger, printing plate, nameplate, reflective instruments3004 plates, thick plates, tensile tubes. For as long as extruded tube aluminum cans cans, requires much higher than the 3003 alloy parts, chemical products production and storage device, sheet processing, building baffle, cable conduit, sewer, various lighting components.
- Q:What is the color of aluminum coating
- Advantages: uniform color, bright and clean, strong adhesion, strong and durable, acid and alkali resistance, corrosion resistance, weather resistance, decay resistance, friction resistance, UV resistance, weather resistance.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range