Aluminium Roofing Coil for Decrocative Materials

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
5 m.t.
Supply Capability:
10000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Grade: 1000 Series,3000 Series,5000 Series Surface Treatment: Coated,Mill Finish,Embossed Shape: Round,Flat
Temper: O-H112 Application: Decorations

Product Description:

1.Structure of Aluminium Roofing Coil for Decrocative Materials Description

Color coated aluminium foil combines all advantages of modern coil-coating technology in our full-automatic production line. Our modern production is 4 coated in one with digital precision control, we can created pattern like Wood, stone, graphic as you want. The aluminium substrate gets degreased, chemically pre-treated and coated in a single production step which resulting in a high-quality uniform coatingreproducible at any time and a material which has been developed for easy processing for a variety of application.

 

 

2.Main Features of Aluminium Roofing Coil for Decrocative Materials

-High temperature resistant
-Weathering resistant
-Scrubbing resistant
-Sound insulation
-Acid or alkali proof
-Fireproof


3. Aluminium Roofing Coil for Decrocative Materials Images:


Aluminium Roofing Coil for Decrocative Materials

Aluminium Roofing Coil for Decrocative Materials

Aluminium Roofing Coil for Decrocative Materials

 

 

 


 



4. Embossed Internal Color Coating Aluminium Plate Specification:

 

AlloyAA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc , etc.
TemperH16, H18, H24, H26, H28
ThicknessFrom 0.1mm to 1.2mm
WidthStandard width:1240mm, 1270MM
Special width:1000mm, 1200mm, 1240mm, 1270mm, 1520mm, 1620mm
DiameterStandard dia:1200mm
Interior dia: 150mm,405mm, 500mm, 505mm, 510mm
outer diameter: 1200mm
Weight2.5 T/coil,3.0 T/coil
Coating thickness PE:>=16 micron ,   PVDF:>=25 micron
Protective film As per customer's request
Coating paint PVDF, PE(Polyester), epoxy, polyamide, polyurethane
Color  Soid, metallic, high gloss,stone,timber,brush,mirror,sparkling, RAL or by customer requirements.
WeightAs per customer's request
SurfaceEmbossed, mill finish, coated
Gloss10-100%
Coating Hardness (pencil resistance)More than 2h
Coating adhesion1J
Impact ResistanceNo peeling or cracking(50 kg/cm)
ApplicationACP,wall cladding,facades,roofs and canopies,ceilings,signboards,blind window,display platforms,electrical panels,etc
Coating ThicknessPE coating:more than 16 micron
PVDF coating:more than 25micron

 


5.FAQ

Q1.How long have you been in this product?
A1:More than 10 years.
 
Q2. What's the minium quantity(MOQ)?
A2. 5 Metric tons
 
Q3. How long is shipping time?
A3. 7 (ready-made products)-25 days(OEM)
 
Q4. How do you guarantee the quality?
A4. 1. Cooperating and Exchaning experience with sevral quoted aluminum companies
    2. Japanese and Swiss production line and skilled works (regular training and testing)
    3. more than 10 years production experience.
 
Q5. Do you have after sale service?
A5. Yes. Any quality problem occurs within one year, pls take photoes,we will be responsible.


 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What hurts more, a wooden bat or an aluminum one?
They both hurt a lot! Wooden ones are heavier and have more density, while aluminum ones are lighter, but they can swing a lot faster. So really, they both have their things about them that make them very painful. I wouldn't recommend getting smacked with ANY baseball bat - they HURT!!!
Q:who knows the ceiling technology of aluminum sheet?
Construction technology of ceiling aluminum sheet: (1) firstly check keel’s quality, the straight shape and uniformly forced state of boom, control the keel’s gap within 500mm, reduce the gap according to design requirement under humid environment. The lower surface of keel is smooth without a sense of bearing down, main device is closely connected with accessories, it can be bound after being confirmed qualified.(2) we should break the board along the cutting line and ensure the margin of cutting board straight and square without any chipping or arris defect. (3) while placing and fixing the board, we can place edge of aluminum-plastic panel(encapsulated edge) in the vertical direction of supporting keel, there is a phenomena of hanging. Aluminum-plastic panel should be placed closely in the process of butt joint, it can’t be pressed. You can start from a plate angle or middle position, and don’t place them at the same time. Slab joint should be straight and in the same width, without break joint. (4) in the process of joint, Aluminum-plastic panel should be placed closely in the process of butt joint, it can’t be pressed. And the butt joint should be stagger, the butt joint can’t be connected on the same keel. When you use doubling plate, the joints of the second layer board and the first layer board can’t be connected with the same keel, double-deck gypsum board should be staggered joints.
Q:Is this aluminium plate ceiling dark keel or bright keel?
Although as upstairs said, now integrated ceiling are dark fitted keel. Can see your picture, elevation difference also has, should be bright install keel. This requires manufacturers and roof distribution. It is not important to open and install, but the key is where to enter such plates.If you think about the effect, consider getting the information from the scene.
Q:how to weld cast aluminum?
If it has a silvery-grey appearance and is very light, than it is probably aluminum, especially if you did a spark test and nothing happened(ruling out magnesium, which is unlikely for a random part anyway). Aluminum is alot lighter than steel, if you are holding it you would beable to tell. Magnesium is lighter than aluminum, but will give of red spark when touched with a grinder or shavings are lit. Cast aluminum can be welded with a wire spool gun, any certified aluminum shop(and most welding shops in general) would have one. It can also be Tig welded which would take longer but may yield a better result. *** Do not preheat the aluminum that hot, never preheat it more than 150°F, at 300°F you will start to degrade the aluminum, especially if it is an alloy. Aluminum melts at 1220°F but with preheat it would be possible to exceed that(especially with a spool gun). Do not do multipass beads without allowing it to cool. You will need to clean the oxide off the surface with a stainless steel brush or acid, normal steel will leave impurities that will affect you welding.
Q:What can I do to remove the paint from the painted aluminum sheet?
The aluminum need scraping, the car is not easy to enamel paint.Is the aluminum plate with a thickness of more than 0.2mm to 500mm, 200mm width, length less than 16m aluminum material called aluminum plate or aluminum sheet, aluminum is below 0.2mm, 200mm within the width of the row material or bar (of course, with the progress of the large equipment, the width can be 600mm row material also more).
Q:What tools can I use to cut aluminum?
The through holes are no problem. A standard drill with the appropriate drill bit and thread taps will do the job nicely. The 2mm deep cavity presents a problem. You need at minimum, a face cutting (facing) bit for aluminum and a drill press. This operation can go wrong very quickly, so I suggest you cut the 2mm cavity before you cut the piece into a square. The bit can be purchased at a machine tool supply company. If there's a Harbor Freight store in your area, they might have what you need. Set the drill press on a lower speed and use a gentle pressure feeding the bit into your work. The piece needs to be tightly clamped to the drill press platform before starting. Any movement of the piece or grabbing by the facing bit can ruin your work and/or cause personal injury. As for cutting the piece, if you can find a set of power squaring shears, that would be the best. Otherwise, opt for a metal saw blade for soft metals and a table saw. Of course you will need to deburr and smooth all your cuts. A mill file should do the job nicely. Have a file card handy for cleaning the file. Aluminum, copper, and other soft metals load up files quickly. The most important thing to remember when working with metals is that a gentle and steady hand works best. Let the tool do the work. If you collect all your resources within the next couple days, you could turn out one per hour. I don't know how many of these you need. Good luck.
Q:aluminum ore is not formed in quebec (why not?)?
Bauxite is the most common aluminum ore. Bauxite forms in tropical regions because its formation requires intense weathering conditions (lots of frequent rainfall) with a very good drainage. Even if, due to continental drift, Quebec was once in a tropical region, it is highly unlikely that bauxite would have formed there because almost all of Quebec sits on the Canadian Shield. The Canadian Shield is a large region of very, very old rock that can be thought of as mostly monolithic and quite flat. Its monolithic nature makes it difficult to weather, and its flatness means that it doesn't drain as well as is needed to form bauxite. Smelting bauxite requires enormous amounts of electricity - not just any energy, but electricity. Quebec has enough hydroelectric resources to make this practical.
Q:Aluminum stock tanks for raised garden beds?
They work great !
Q:how to process 0.3mm hole on aluminum material?
It's bored by drill.
Q:How to distinguish fluorocarbon spraying and powder spraying aluminium plate
1. Identification of fluorocarbon spraying and powder spraying aluminum plate:(1) measuring thickness, fluorocarbon three coated with 40UM, and powder coating at least 60UM.(2) surface evenness, fluorocarbon is generally paint, surface smoothness is higher, leveling is better. The powder spraying has poor flatness. Orange peel phenomenon is obvious.(3) look at the back of the workpiece. The back of the workpiece in the transition area of powder coating spraying and spraying, obviously rude sense. And paint is better.(4), the experiment, with a knife or about 400 mesh sandpaper graze back coating, causes the inclined fault. If there are different colors, then fluorocarbon (if not found, you can use a magnifying glass).

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range