|Material|| Alloy 6063,6061,6005or according to customer’s choice|
|Temper|| T3, T4, T5, T6|
|Surface|| Anodize, electrophoresis, powder coating, PVDF coating, wood grain painting, matted, etc.|
|Colour|| Any colour based on Standard Germany RAL Mark|
|Length|| Coating 6.5 meters, Anodizing 6.5 meters, Mill finish 5 meters|
|Press Machine|| 500-4000 tons all together 64 press lines.|
|Fabrication|| 1. Windows and doors; 2. Drilling; 3. Bending; 4. Cutting; 5. etc.|
|Certificate|| ISO 9001|
|Warranty|| 1. GB5237-2008 equal to EN12020-1.2(2001); |
| 2. GB6892-2006 equal to DIN 1725|
| 3. Within 15 years without colour changing, all life without surface peeling off; |
| 4. All life without dfformation without outer force|
|Moulding|| 1. Using our moulds, no fee; |
| 2. Using customer drawing, opening mould, usually about 10~50 tons the moulding fee is free; |
| 3. Can be discussed.|
|Capability|| Annual output 80,000 tons|
- Q:Glass curtain wall according to the height of how to choose the size of aluminum?
- This question, how much choice of aluminum, not only the height, there are sub-grid size, how much load, connection and so on a series of questions, see the curtain wall specification and calculation conditions to understand, this result is calculated, Not just based on the height determined
- Q:Can the glass curtain wall frame be made of steel?
- 1, do not recommend making curtain wall with steel material.
2, the hardness of steel itself is not enough, and its own steel is not specifically used to make curtain wall material for the production side choice.
3, the strength of steel itself, compression and thermal expansion and contraction of the performance are not as good as aluminum.
4, glass curtain wall behind no need to add steel. The glass curtain wall itself has the characteristics of the external walls, noise insulation and other properties are no problem. Glass curtain wall keel is generally exposed in the outside, completely hidden up is not necessary.
- Q:What is the length of the curtain wall aluminum is how much there are 400 square meters how much aluminum?
- Curtain wall aluminum model is generally 6063, T5 high precision grade, column section width of 60,80 series, generally with 60 series, high cross section according to the calculation to determine the frame of the general wall of aluminum content of about 7kg / M2.
- Q:What are the differences between aluminum oxide curtain wall materials and oxidation doors and windows?
- Film thickness is no special requirements are the same, the domestic anodic oxidation generally require AA15.
- Q:What is the curtain wall insulation profile
- Can be used with insulation film
- Q:Glass curtain wall profiles and wall joints how to deal with?
- Plus keel, plus light steel keel or paper gypsum board closed to do outside the glass curtain wall
- Q:Curtain wall aluminum is not broken bridge aluminum line okay
- Hidden curtain wall itself is the heat, the box wall is the existence of broken bridge insulation!
- Q:What materials are required to be tested?
- Curtain wall works need to re-inspection materials
The first is the keel material: channel, angle, some supervision also requires steel to be measured; followed by chemical anchor to do on-site drawing experiment, as if to do three groups; and then is the glass aluminum.
Main profiles (including aluminum and steel profiles), screw bolts, drawing test, four-color inspection, hardware accessories
The project is mainly hidden before the board, including steel keel, anti-corrosion operations, materials, such as inspection and other processes.
- Q:Hidden frame curtain wall, structural adhesive bonding surface treatment whether there is a standard?
- Structural silicone sealant for construction GB16776-2005 is specified.
- Q:Will the bridge aluminum alloy glass curtain wall the amount of aluminum per square meter is the number of kg ah?
- What is the series of curtain wall, that is, curtain wall column into the deep size, and profile wall thickness, width, weight has nothing to do. But now the decoration quota this piece of this argument, roughly divided a few lines, strictly speaking: the accuracy is quite poor! If the bid is calculated on a fixed basis, then the two sides need to negotiate, if calculated by the list, it is relatively simple: according to the profile line density calculation.
We have spectrograph, mechanical property testing machine, metallographic testing system, bending test machine and Ultrasonic explore equipment can provide full range inspection of the products before, during and after the production process. Welcome to inform us your samples and drawings, we try our best to exclusively develop and supply the bearings to you.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||7.69% North America
7.69% South America
7.69% Eastern Europe
7.69% Southeast Asia
7.69% Eastern Asia
7.69% Western Europe
7.69% Central America
7.69% Northern Europe
7.69% Southern Europe
7.69% South Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range