Alloy Steel Pipe Fittings Butt-Welding Concentric Reducers

Ref Price:
Loading Port:
Dalian
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Steel Pipe Fittings Butt-Welding Concentric reducers

Features standards and products of our Butt-Welding Concentric reducers:

Features of Butt-Welding Concentric reducers:

1.       High class materials

Our products only use high class raw materials of carbon/alloy steel pipes made from NKK or MANNESSMANN equipment for ordinary, high pressure, low/high temperature,boiler and other purposes.

2.       Uniform wall thickness and perfectly round

This can be achieved by our particular technical knowhow and our quality control program.

3.       Accurate dimension

Efficient piping work can be made only with fittings of correct dimensions and shapes. Our fittings are finished to have accurate straight/ plane ends, beveled angle...etc. to applicable standards by means of two or three spindle beveling machines.

Standards of Butt-Welding Concentric reducers:

Our welding fittings are manufactured in compliance with the following appliance standards:

ASME B16.9   ASTM A234   MSS-SP43   WPHY60   JIS B2311   DIN2605

                      ASTM A403   MSS-SP75   WPHY65   JIS B2312   DIN2606

                      ASTM A420   WPHY42    WPHY70   JIS B2313   DIN2616

                      ASTM A860   WPHY52                                       DIN2615

Manufacturing method and process of Butt-Welding Concentric reducers:

Alloy Steel Pipe Fittings Butt-Welding Concentric Reducers

 

BUTT-WELD FITTINGS   ASME B16.9/MSS SP-75

Butt-Welding Concentric reducers:


Alloy Steel Pipe Fittings Butt-Welding Concentric Reducers

Alloy Steel Pipe Fittings Butt-Welding Concentric Reducers





Packing of Butt-Welding Concentric reducers:

Alloy Steel Pipe Fittings Butt-Welding Concentric Reducers

FAQ of Butt-Welding Concentric reducers:

1) Q: What’s your main product? Which kinds of products are more competitive in your product range?

     A: Our main products are steel flanges, pipe fittings and steel pipes.

     Competitive Items: flanges in stainless steel, carbon steel, alloy steel  and punching carbon steel

     Butt welded pipe fittings in stainless and carbon steel

2) Q: what’s your largest size of flange and fitting? How long is the  production cycle?
      A: The largest flange we could produce is 80’’ and the largest fitting is 50’’.

      In general, we spend 20-25 days in a 20-ton order. If necessary, we  could make it shorter.

3) Q: Could you produce according to the drawings?

     A: Sure. We could produce according to the provided drawings, which  include forged and casted items.

4) Q: What kind of certificates do you have?

     A: We have ISO, TUV, API,SGS,BV etc. fittings in stainless and carbon stee

     Malleable Iron ,Stainless and carbon steel pipes


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the standard drawing numbers for hydraulic couplings?
(two) prohibit adding sealant and other fillers. Some people in order to obtain better sealing effect, in the card cover with sealant, the result of sealant is poured into the hydraulic system, causing hydraulic components, such as plugging holes.(three) when connecting the pipe, the pipe should have enough deformation allowance to avoid drawing the tube.(four) when connecting the pipeline, the lateral force should be avoided, and the lateral force will cause the seal to be too tight.(five) when connecting pipelines, should be a one-time good, avoid repeated disassembly, otherwise it will make poor sealing performance.
Q:How are the sleeve couplings joined?
The clamping ring is inserted into the outer wall of the steel tube by the action of the nut and the main body so as to form a seal
Q:PT1/4 large diameter pipe joint? No figure urgently
The thread has a taper of 1:16, equivalent to 55 degrees taper pipe thread, or ZG
Q:Press the hydraulic pipe fittings standard need to do what procedures
The corresponding micrometer scale is 3. Installed with 33mm mold on the mold seat, and rotated to 3 micrometer scale, the hose peeling and joint assembly. After measuring the joint outer diameter of buckling is buckling parameter table after withholding value 33.5mm is withheld. If the diameter does not conform to withhold, after a fine micrometer withhold hose. Withhold hose connector: swage size too much, hose layer broken, causing leakage; too little buckling size, and hydraulic oil spill caused by rushing out of joint.
Q:Hydraulic pipe quick coupling principle of hydraulic pipe joint
High degree. Piping systems for oil, gas and general corrosive media 15~26GB3733.1 to 3765-1983 flared pipe joints are sealed using the end expansion of the pipe, without the need for other seals. The utility model has simple structure and is suitable for the connection of thin-wall pipe fittingsA low pressure piping system for oil and gas, allowing pressure to be used in table 41, table 27~41GB5625.1 ~ 5653-1985 insert welded pipe joints will need to the length of the pipe is inserted into the pipe end and the pipe connector until the connector end of the contact, the pipe and the pipe joint are welded together, can save over, but the pipe size is strictly applicable to oil and gas as the medium pipeline system table 43 ~ 49JB3878-1985 cone seal welded pipe joint pipe end is an external cone surface, plus O shape sealing ring, and the connector body cone surface matching, screwed with screw. The working pressure is 16 ~ 31.5MPa, the temperature to 80 DEG C - 25Piping system for oil medium 50~62
Q:Classification of pipe couplings for hydraulic couplings
Welded pipe fittings, high pressure hoses.Transition type pipe joint, jacket type pipe joint and three type pipe joint,
Q:What's the meaning of the plumbing PVC pipe joint specification "1/2" "X12" and "1/2" "x18"?
First specification 1/2 "X12": 1/2 inches in diameter and 12 inches in length.Second specifications 1/2 "x18": 1/2 inches in diameter and 18 inches in length.
Q:G1/8 "pipe joint end special sealing WD-B02 is what mean
WD circle of different names is divided into: ED ring, ED ring, hydraulic pipe joints, pipe joint gasket seals and so on, the use of pressure: 5 (MPa), the use of temperature: 200 (c), properties: corrosion resistance, high temperature resistance, abrasion resistance, applicable scope: pump, cylinder, sealing, effect material: nitrile rubber (NBR) fluorine rubber (VITON).
Q:Connect with stainless steel tube with 304 stainless steel clip type pipe joint,
Theoretically, the pressure is related to the design pressure of the joint and the maximum tolerable pressure of the steel tube manufacture.
Q:PT3/4 what is the diameter of the pipe joint?
Diameter: Phi 23.6 mm.Taper Pipe Thread is an inch taper pipe thread standard. Threaded pipe threads (GB 7306 and ISO7/1).

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range