Specification of Air Diffuser
Supplying Air Diffusers
-Frame Thickness: 1.0mm /0.8mm
-Any Size be customed
-Powder Coated RAL 9010/9016
HVAC aluminum air conditioner grille
Extruded Aluminum alloy (6063-T5)
Blades in 45°from aluminum profile or as customer’s requirements
30mm as standard or as customer’s requirements
0.8mm, 1.0mm, 1.2mm, 1.5mm or according to the customers’
Powder coated, Anodized , PVDF, Mill finish.
Width x Height, any sizes available
Powder for Finish
Environmental protection and non-toxic, and Color to keep 5 -10 years.
Refer to RAL colors swatch or customized colors available
Drawings designed according to the customers’ requirements
T/T, L/C, PYAPAL, etc.
Usual 15-20 work days for a 40GP container
Bubble wrap + Cartons for FCL, Bubble wrap + Cartons + Wood-box for
Stainless steel security mesh, Aluminum security mesh
Fixing and adjustable installation
Usage of Air Diffuser
The grille is suitable for ceilling sidewall, soffit or cill mounting and may be used for supply or extract applications.
Typical installations include offices, shops, hotels and most commercial or industrial buildings.
Available as standard in white polyester powder coat finish.
Other polyester powder coat finishes are also available as an option.
FAQ of Air Diffuser:
1, What's size do u have for round type diffuser?
A: We have face size from 150mm to 550mm,neck size from 250mm to 400mm聽
2, Do u still have other types ?
A: Yes, we have round diffuser/ rectangle diffuser/ linear grilles/ baseboard diffusers,etc
3, What's the most early delivery time?
A: Within 25 days for each 40'fcl
- Q:On the issue of water seepage, water seepage parts of the wall
- Bathroom floor and wall skirt parts do not have a good dew point
- Q:To the advantages and disadvantages of warm
- Look at the area of your house, if you are a villa, then you can consider installing plumbing because you have a place to put the boiler. Plumbing due to the current use of a long time, so all aspects of the technology is relatively mature. If the house area is small, three rooms, 2 rooms, a room of the apartment, then you can consider the installation of heating, easy installation, power consumption is not large. Good heating has an automatic temperature control system, relatively speaking than to save water to save.
- Q:What is the difference between the hydraulic module and the original hydraulic module?
- The heat exchange between two kinds of media is one end of the hot and cold source. Hot and cold sources, can be industrial steam, hot water, waste off the urge to criticize the waste of too much water, waste heat and other hot media, can also make ice water, freon and other refrigerant. Can be provided by the heat supply plant, garbage burning plant, boiler, heat pump host. After the heat exchanger through the transfer, will be directly or indirectly cold and hot energy transfer use. Use the end, can be a variety of common terminal load equipment, to warm coil, heat sink, capillary air conditioning, water tanks and so on. As for the landlord mentioned the hydraulic module, the use of plate for specific aspects of which, or to find manufacturers
- Q:How to determine the heating pipe test pressure
- According to the design run pressure of 1.5 times to determine. Such as the design operating pressure 0.6MPa, test pressure 0.9Mpa.
- Q:Do you want to stretch your feet at every door?
- Q:What is the composition of the heating system?
- Heating systems, heating systems, boiler systems, outdoor pipe networks, indoor pipe networks and radiators. The energy consumed by the traditional heating and heating system is fuel, and the energy consumed by the electric heating and heating system is electricity. Therefore, in the environmental protection requirements of high urban heating and heating, coal-fired boiler room or coal-fired stove will be strictly limited to use, replaced by several possible forms of heating are mainly concentrated heating of the saucer segment Boilers, large electric heat pump and gas boiler room and scattered in the user's room within the home gas stove, electric heater and so on. At the same time, in order to reduce the power grid power generation peak and valley difference, but also consider the heating system set up in the heat storage device, so that meet the heating requirements at the same time, the load on the power load play a role.
- Q:To warm or water pipe leakage from the time of the warranty period
- Installation of the general two-year warranty period. If there is a problem with quality without warranty
- Q:What is the mixing device in the warmth?
- What is the mixing device in the warmth?...
- Q:Home coal-fired heating stove and electric heating furnace which is good
- Coal, cheap to save money. Electricity, clean and easy to control, expensive
- Q:Gas boiler hanging water valve bad, how to pay the furnace.
- There is a way, you can connect the water pipes and heating pipes can be a
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range