Air Evacuation Valve of Solar Water Heater Parts on Sale from China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
1000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Packaging & Delivery

Packaging Detail:

standard export packing, steel pallets, wooden pallets, customers required

Delivery Detail:

10 Days

 Air Evacuation Valve  Specifications

1. good structure
2. pressure and impact
3. stability performance

Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.   

2.Product Introduction 

Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer  ring, valve lid, Valve base. 

 Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard

3.Working Principle 

 1.Static status: Once you set up a pressure range. Normally,  pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.

2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.

 3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.

4.Features

1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.

5.Our Services

Private Customized:

We design  different Pressure Relief Valve according to specific requirement.

Customers’ Guidance:

Please leave the following info in inquiry

1.  What’s the raw material  ( carbon steel or stainless steel  )

2. What’s the entrance diameter( 508 mm /273 mm  or customized)

Because with these factors, we are able to give you a fast answer.

 

 

 

Air Evacuation Valve of Solar Water Heater Parts on Sale from China

Air Evacuation Valve of Solar Water Heater Parts on Sale from China

Air Evacuation Valve of Solar Water Heater Parts on Sale from China

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What's the advantage of using three way valves?
Three way valve generally has a cut-off, regulation, diversion, and prevent counter flow, voltage regulation and overflow and other benefits, because of its benefits more, so the use of the three valve is extremely extensive, in the valve industry is also very important.
Q:Why use the pump outlet valve to adjust the flow rate?
This is the most widely used method of regulating flow, while protecting pumps and motors. The general classical installation method is as follows: the pump outlet is equipped with a vibration reduction joint, and then a gate valve control switch, and then install a multi-function water pump valve to adjust the flow.
Q:How to use current to control valve opening and closing?
A relay or PID controller can achieve this operation, only need to set out, the valve can use electromagnetic valve, which belongs to a rapid opening and closing valves, only need to control the electric power to the valve can automatically open or closed, but the temperature change is large, if you want to keep the temperature constant. The best selection of regulating valve, constant temperature control valve will be before or after the valve, the main electrical control knowledge, do not know what I said is clear, remember the points, thank you!
Q:Can the gas valves be switched off regularly?
Now gas stoves have valves, do not have to pass the gas valve, valve, he has the life of the use of frequency, although the switch is not good, long time no operation is not good
Q:What are the general types of valves?
Pneumatic and hydraulic valvesPneumatic valve and hydraulic pressure based on a certain air, water or oil as the power source, using the cylinder (or cylinder) and the movement of the piston to drive the valve, the general pneumatic air pressure is less than 0.8MPa, the hydraulic or hydraulic pressure is 2.5MPa~25MPa. Such as used to drive diaphragm valves; rotary gas and liquid drives are used to drive ball valves, butterfly valves, or plug valves. The driving force of the hydraulic device is large, and it is suitable for driving large diameter valves. If used for driving plug valves, ball valves and butterfly valves, the reciprocating motion of the piston must be turned into a rotary motion. In addition to the cylinder or hydraulic cylinder piston to drive, but also the use of pneumatic film driven, because of its small stroke and driving force, it is mainly used for regulating valves.Manual valveThe manual valve is the most basic way of driving the valve. The utility model comprises a hand wheel, a handle or a plate hand, and is driven directly and driven by a transmission mechanism two kinds. When the starting torque of the valve is large, it can be driven by gear or worm gear to achieve the purpose of omitting. Gear drive, spur gear drive and bevel gear drive. Gear reduction ratio is small, suitable for gate valve and stop valve, worm gear drive is relatively slow, suitable for cock flashing, ball valve and butterfly valve
Q:High and low pressure valve is how to distinguish?
Vacuum valve - valve with operating pressure below standard atmospheric pressure.Low pressure valve - nominal pressure PN is less than 1.6MPa valve.Medium pressure valve - nominal pressure PN 2.5~6.4MPa valve.High pressure valve - nominal pressure PN10.0~80.0MPa valve.Ultra high pressure valve - nominal pressure PN greater than 100MPa valve.
Q:What's the valve as a unit?
Business now there are many valve manufacturers, with the rapid expansion of SMEs, SMEs are more ~!
Q:What is the valve before and after the pump?
Pump in front of the gate valve + one-way valve, after the pump connected valve, so that in the regulation can be clearly aware of the actual pump lift is large, without the impact of system pressure.Valve is the general name of pumps and valves.A valve that is not used in a pump or with a pump.Pump and valve are often associated with the use of the occasion. In other words, where there is a pump, there is usually a valve, where a valve is often required. They are all used for liquid delivery.
Q:What is the term "Z41H-16C" on the line?
The ram of the Z41H-16C is linear with the stem, called (also known as the bar gate valve). Usually there is a trapezoidal thread on the lifter. The rotating motion is changed into a straight line through the nut at the top of the valve and the guide groove on the valve body. That is to say, the operating torque is changed into the operating thrust.
Q:How to better maintain the valve?
How to maintain the valve?Enter the same as other mechanical products, but also the need for maintenance. This work well, can extend the service life of the valve, the following will introduce the valve maintenanceStorage and maintenanceThe maintenance of the purpose is to keep the valve in the custody of the damage, or lower quality. In fact, improper storage is one of the important reasons for valve damageThe valve custody, should be arranged in good order, a small valve on the shelves, large valves can be neatly arranged in the warehouse on the ground, not arbitrary lumber pile, do not let the flange face contact with the ground. This is not only for beauty, mainly to protect the valve, not to touch badBecause the storage and handling properly, hand wheel broken, crooked stem touch the fixed nut hand wheel and stem loosening loss and so on, these should avoid unnecessary losses.We temporarily on the short-term use of the valve, should remove the asbestos packing, in order to avoid electrochemical corrosion damage to the valve stem.I just entered the library on the valve, to conduct inspections, such as during transport into the water or dirt to wipe clean, re storedThe import and export of valves to use wax paper or plastic sheet sealed to prevent dirt insideThe valves on the machined surface rust in the atmosphere should be coated with anti rust oil, protectI placed outside the valve, must be covered with linoleum or tarpaulins like rain, dust items. Keep the storage of the valve clean and dry

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range