Q:How do you use double-sided adhesive for cloth? What is its purpose? Must heating be applied to glue? Will there be residual glue after bonding? Please speak more detail.

Cloth can be directly adhered to the top with double-sided adhesive, without heating. Hot glue is called hot melt adhesive

Q:How do I see the double - sided tape made of sol or with gum?

Oil glue double-sided adhesive is generally used for embroidery, PC board, Ming board adhesion, die-cutting, stamping, leather, clothing, mobile phone accessories, film switches and other industries instead of adhesive, economical and effective for all kinds of bonding.

Q:How to remove double adhesive on paper?

Get some petrol at the glue point. Or put ice in the refrigerator after the trial, try not.

Q:Cement floor floor leather with thick or thin double-sided adhesive

Floor leather because it is a roll, in the shop before considering width, as far as possible in line with your house size, even stitching, but also to sew stitching to inconspicuous place. If it is on the parquet, cutting and sewing to the mosaic position and don't consider making full use of the "width.

Q:Double sided tape how to cut well, master with automatic cutting table, cut out, all askew, what reason, what should pay attention to?

Two, aspects of the tape of the material itself may be a problem, some of the material almost cut when the effect is not too good, will play a flash, or volume, complex will also affect the cutting effect, to spread the trouble, in addition, mechanical equipment has great influence, we are do the cutting device, cutting time, feed speed is that, because the first two are no problem, good automatic cut several section of cutting speed, feed, cutting, cutting paper and so on, if not cut it, only one speed in, too may the flash, uneven cut

Q:The basic requirements, attached to the bottom surface of the base, a bottom surface with a permanent adhesive, affixed to the side of the desktop environment. When the base is fixed with double adhesive, another part is inserted in it, and the component is required to be picked up from the vertical direction (>=15N), and the base is firmly jointed with the table top. But when the base needs to be repositioned, it can not be too difficult to pull out, and it can not destroy the structure of double faced adhesive, thus shortening the service life

As is heavy positioned in the production process requires a short period of time, the basic level of adhesive tape can meet, if it is produced after the long time the frequent need to re positioning, now need a permanent adhesive, a heavy residue series tape repeatedly.

Q:With the two convex lens, a cylinder, a ruler, transparent tape, double-sided tape do magnifier

It should be a Kepler telescope rather than a magnifying glass (a magnifying glass is actually a convex lens with a short focal length). The simple Kepler telescope is fabricated as follows:1, take out two magnifying glasses and a printed article

Q:What are the uses of video tapes in life?

1, tape should be stored in the warehouse, to avoid the sun and rain; forbidden to contact with acid, oil, organic solvents, keep clean and dry, away from the discovery device 1m, room temperature is between -15 and ~40 degrees2, rolls of tape should be placed, not folded, should turn once quarterly long store. 3, when the best handling conveyor belt with a crane and rigging beam and smooth lift, to avoid damage to the band edge, not caused by rough handling, loose volume rejection.4, tape type, specifications should be based on the needs of use and specific conditions, reasonable selection5, shall not be different varieties, different specifications, models, strength, cloth layers of adhesive tape connected (with groups) used together6, the conveyor belt joint is best to use hot vulcanization adhesive, in order to improve reliability, to maintain a higher effective strength7. The diameter of the transmission roller of the conveyor and the minimum belt diameter of the conveyor belt shall comply with the relevant regulations8, do not allow the tape or crawl to keep hunting, drag roller, roller flexibility, tension force should be moderate.

Q:How to fill in the property when releasing adhesive tape?

Thickness, color, temperature, specifications, use, base material, almost on these

Q:The door frame is glued on both sides of the curtain. Now the curtain doesn't work. It can't be cleaned on both sides. How can it be removed? But it doesn't break the paint on the door It's a little bit on the wall, too.

2, with cotton swabs stained with alcohol, wipe in the doorframe double adhesive position, repeated wiping, because alcohol evaporates quickly, see no, wipe again.