Standard Size: 595mm*595mm, 605mm*605mm
Standard Thickness: 8, 9, 10, 12, 14, 15mm
Edge Detail: Square Edge, Tegular Edge (≥12mm)
Technical Data of Acoustic Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Main advantages of Acoustic Mineral Fiber Ceiling:
High humidity resistance properties
Excellent light reflectance
No content of asbestos
Zero release of CH2O
- Q:The surface of the Mianqi Multilayer can not be decorated with decorative panels
- Of course, all the decoration to do their first to safety considerations
- Q:Translucent decorative panels, materials, acrylic and polyester differences
- Not the price to be more expensive, excellent West is the use of imported polyester material, you can ask
- Q:I would like to ask, who knows what is the UV decorative board? Who can introduce it?
- The decorative plate is the latest type of environmentally friendly decorative materials, the surface of UV light curing paint protection treatment, the substrate has a cement pressure plate, solid wood multilayer board, MDF, glass magnesium fire board four.
- Q:Recently renovated, a lot of recommended clean decorative panels, may I ask, clean decorative panels really have self-cleaning do?
- The key point, this clean decorative plate, is a very good friend, work in the special board, and then right now. We all know, the price is good to say. So, the price ratio, I gray often satisfied.
- Q:Three-board is not a three-dimensional board, or three-dimensional decorative panels, what name
- Three delivery board is the name of OKorder Lan Haitong promotion products. The name can be called, is a call.
- Q:How is the decorative plate on the wall fixed?
- And is divided into light steel and wood mainly according to your actual situation to set
- Q:How do the van side of the van?
- Van side door plate dismantling method:
1, open the car side door, the glass lift on the rocker on the small cover with plastic sheet tilt, remove the screw to remove the rocker.
2, the glass below the lock door button on the clinker button down.
3, if it is glued to the door skin, with a plastic knife from the side into the next look next to look up, if it is buckle, with a word tool to buckle up the door can be decorated down the door trim.
- Q:pitching question/ help!!!1?
- as a pitcher, you shouldn't be lifting weights too much. Baseball players don't need to be muscular. You should be working on your legs so you can push off the rubber with more force, leading to a faster pitch. If you want a drill to help gain speed on your fastball, there are two very good ones i know. the first one is to get a rag, and go through your windup and really put focus on snapping it. If you get a whipping sound, it means you did the drill correctly the second one is to get a heavy fishing weight, like 5-10 pounds, and go through your windup and throw the weight. This drill can be very dangerous if you throw too far from the side, as it can hurt your elbow. i hope i helped.
- Q:Pvc decorative plate line making machine how much money
- Polystyrene referred to as GPPS, also abbreviated as PS, is made of styrene polymerization. GPPS has the characteristics of light weight, low cost, low transparency, low water absorption, and is used in the manufacture of daily necessities. However, the disadvantages of GPPS are obvious, fragile, low strength, poor heat resistance, Taste and so on.
- Q:Carved decorative plate which material is not easy to deformation
- Reduce building energy consumption, energy conservation. The use of metal carved insulation board wall of the building, can greatly improve the wall of the thermal insulation function. Than do not use metal carved insulation materials can reduce the energy consumption of more than 45%. summer
The season can greatly reduce the heat conduction from the external wall of the sun to the indoor heat, thus reducing the energy consumption of the heating and air conditioning and protecting the main structure, and prolonging the life of the building;
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range