Thickness Range: 6mm – 15mm
Astral Series: MA01, MA02, MA03, MA04
Perforated Series: MP01, MP02, MP03
Fissured Series: MF01, MF02
Sand Series: MS01, MS02
Customized textures are also welcome ifbuyer pays for new-mould charges.
Square edge for 15mm & 24mmT-Grid
Tegular edge for 15mm & 24mmT-Grid
Micro-lock tegular edge for 15mm T-Grid
Density (kgs/m3): 240-280kgs/m3
Fire resistance: class a qualification(GB8625-88 STIPULATION)
Moisture rate (%): ≤3
Light reflect: 0.60-0.80
Bending strength(N): ≥60
Sagging resistant properties:≤0.35mm
High humidity resistance properties
Excellent light reflectance
No content of asbestos
Zero release of CH2O
Typical Application Areas:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public Site
- Q:How is the interior trim of the car door?
- Tools: flat screwdriver, 8 socket wrench
1, with a flat screwdriver down to pry open the door handle lower trim, from the middle down and then pull out (the back door is the pry half of the front)
2, remove the handle under the veneer can be seen after the internal two black eight hex bolts, with a socket wrench down
3, unplug the window lift switch plug (which has a clip, use your fingers from the back hook to pull out)
4, with a flat screwdriver from front to back pry open the door handle trim panels, remove the door when the handle
5, hand the door trim below the mouth a little open a gap, and then put a wrench into the pry, that the interior board is a plastic card with a plastic card buckle on the door, the pry when the time to use a little effort, One by one pry. If you want to wrench the plastic interior trim bad, you can use a little steel bars and the like, but not too thick, or can not reach into.
6, a lap card bamboo shoots all pry open, hold the door trim board can be removed from the bottom up
- Q:What is a three-dimensional decorative plate
- Three-dimensional decorative plate is also called the three-board (3dboard) using the original ecological plant fiber from the most raw materials processing, environmental protection and durability, easy installation, sound insulation, safe fashion. For China's independent intellectual property rights and copyright of the emerging high-tech products.
- Q:Raid Wasp and Hornet spray on my ceiling and wall.?
- No evaluate spraying window seals and door frames till the wasp is sitting on one in all them. Raid needs to land on the computer virus as a manner to kill it. in case you preserve spraying your abode, you will inhale the vapour from the Raid and that would desire to reason you discomfort, to no longer point out having to post with the stink.
- Q:Uv stone plate sticky method, what glue
- 1. In the wall covered with a grass-roots level, commonly used is 3MM plywood, woodworking board, a good point is the fire glass magnesium board. With nails to nail them on the wall, and with a sandpaper to clean the board.
2. Saw board, the UV high-gloss decorative panels according to the actual requirements of a block into a block.
3. Flip, will be installed on the four sides of the UV board with a chamfering machine down to 45 degrees angle. According to the actual installation requirements, and some just down the next two sides or three sides.
4. Clean the back of the UV board, clean the back of the UV board with sandpaper and rag.
5. The universal glue or wood glue evenly coated on the back of the UV board, and then the UV board flat on the wall, and then gently hit the UV board, so that UV board more firmly stick to the wall.
- Q:Imitation marble decorative plate is what material
- (1) scraping does not spend, pollution does not dye, burning does not hurt, anti-aging, non-toxic without radiation.
(2) color and diverse, do not change color does not fade, long service life.
(3) acid, alkali, high temperature, good weather resistance, waterproof, fire, moth, anti-mold.
(4) compact structure, strong anti-fouling, easy to clean care, can maintain a lasting gloss, bright as new.
(5) from environmentally friendly raw materials, according to the requirements of processing into a plane, arc and other shapes.
- Q:Farm small courtyard of the kang kang skirt with what decorative plate good
- 1, beautiful decoration:
The outer metal panel, through embossing, baking process, can be made of marble, tiles, mosaic, wood and other artistic appearance, 110 colors and textures to choose from.
2, insulation energy:
The thermal insulation properties of the inner layer are hard foam polyurethane, the thermal conductivity is less than 0.024W / m · k, the insulation performance is better than XPS extruded plate (thermal conductivity 0.031W / m · k) and EPS polystyrene board (thermal conductivity Is 0.042 W / m · k).
3, construction is simple:
Take the keel dry hanging with the wall connection, the product of the grass-roots flatness or humidity requirements are lower; board and board between the plug-in installation, no adhesive bonding or hook, the construction requirements of the lower temperature conditions , Can be winter facilities; because at the same time with the decoration and insulation function, you can ensure that the construction and insulation construction in parallel with the construction, will help shorten the project duration, speed up the progress of the project, saving construction costs;
Polyester topcoat, take the coating process coated on the galvanized steel surface, the outdoor use of 10-15 years does not fade. Aluminized zinc alloy steel plate life of more than 45 years.
5, environmental protection:
The material using environmentally friendly raw materials, assembly line production, finished installation, construction and use of the process will not harm the environment, and recyclable.
6, low prices:
The product is only one-third of the price of similar products.
- Q:What is the difference between the paint plate and the polymer plate?
- Mianqi board is a common decorative plate made a layer of film, polymer plate is 1-2mm thick PVC material
- Q:Toyota Highlander tail door trim how to dismantle
- Look carefully at the back of the little lid there is no Rose
- Q:Xps insulation one decorative plate composite process
- Energy-saving insulation board according to the type of insulation core, panel type for classification.
Energy-saving insulation board according to insulation core material type is divided into: organic insulation board and inorganic insulation board type.
- Organic insulation board: Insulation material can be molded polystyrene board (EPS board) (physical properties: low density, low tensile strength), extruded polystyrene board (XPS) and rigid foam polyurethane or polyurethane board.
- Inorganic insulation board type: insulation material can be expanded glass beads, expanded perlite plate and foam glass plate and other inorganic insulation board.
Insulation decorative panels according to panel type is divided into: paint panel type, non-painted panel type.
- Paint panel type: panel can be aluminum, steel, aluminum composite panels, inorganic resin plate, such as fluorocarbon paint layer.
- non-lacquered panel type: panel can be natural stone plate, wall tiles, pottery, etc., such materials, decorative performance and traditional curtain wall equivalent.
- Q:Should I stall my senior mare? Or Senior horses is better off being turned out 24/7?
- arthritis. it's been proven that the worst thing you can make an arthritic person or horse do, is stand still for hours. stall= bad. worst thing to do is to make an arthritic horse be stuck in a small place. turn him out. movement = best
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range